• ETRI Journal
• /
• v.28 no.6
• /
• pp.709-720
• /
• 2006

In this paper, we suggest a simple and efficient multiple-forwarder-based file distribution method which can work with a tree-based application layer multicast. Existing multiple-forwarder approaches require high control overhead. The proposed method exploits the assumption that receivers join a session at different times. In tree-based application layer multicast, a set of data packets is delivered from its parent after a receiver has joined but before the next receiver joins without overlapping that of other receivers. The proposed method selects forwarders from among the preceding receivers and the forwarder forwards data packets from the non-overlapping data packet set. Three variations of forwarder selection algorithms are proposed. The impact of the proposed algorithms is evaluated using numerical analysis. A performance evaluation using PlanetLab, a global area overlay testbed, shows that the proposed method enhances throughput while maintaining the data packet duplication ratio and control overhead significantly lower than the existing method, Bullet.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.12 no.1
• /
• pp.61-68
• /
• 2017

In this paper, the coarse acquisition code (C/A code), for civil navigation, of the ranging codes for Global Positioning System (GPS) is studied, simulated and analyzed by using Matlab. We can see with the simulation results that the correctness of the method and feasibility, which is at simulation platform to further study on the real environment of GPS signal, can be confirmed. With using this results, we think, the complexity of tracking the satellite signal environment can be captured, and the performance of satellite receiver will be improved.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.3
• /
• pp.1344-1361
• /
• 2016

ICT contents market is globally considered as an industry of high added value, where sustainability is accomplished through stories that cover wide range of consumers. However, the need for long-term internationalization strategy is growing as countless number of applications and games has pushed the local market to its limit. Thus, this research explored on the industrial characteristics and the internationalization of ICT contents firms through acquisition of competency. Based on Resource Dependence theory, the authors studied how pursuit of legitimacy and autonomy functioned in the expansion process of ICT contents firms. A survey analysis of 212 key decision makers of Korean ICT content firms were performed, to reveal that resource environment and interdependence must undergo a thorough consideration.

• School Mathematics
• /
• v.4 no.1
• /
• pp.63-78
• /
• 2002

This research's purpose is to investigate follows. 1. How do middle school teachers recognize the mathematical communication globally? 2. If we classify the modes of mathematical communication as written, spoken, graphic and active ones, how much do teachers use them and how do the students' communication ability come as teachers judge? 3. What are teachers' thinking, the present condition and the future indication for the application of mathematical communication with computer? 4. Do teachers evaluate their students' communication ability? If then, what is the assessment rubric of student's communication ability? The results are analyzed by frequency analysis including percentile and free writings are arranged by similar responses. The result of this study is that global recognition for mathematical communication, current state for students' concrete performance of mathematical communication, and assessment of mathematical communication & proposals are very lacking.

• 제어로봇시스템학회:학술대회논문집
• /
• 1990.10a
• /
• pp.263-268
• /
• 1990

This paper deals with the manipulator with actuator described by equation D over bar(q) $q^{...}$ = u-p over bar (q, $q^{.}$, $q^{..}$) with a control input u. We imploy a simple method of control design which bas two stages. First, a global linearization is performed to yield a decoupled controllable linear system. Then a controller is designed for this linear system. We provide a rigorous analysis Of the effect of uncertain dynamics, which we study using robustness results In time domain based on a Lyapunav equation and the total stability theorem. I)sing this approach we simulate the performance of controller about a robotic manipulator with actuator.tor.r.

• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.1407-1412
• /
• 2003

In MEMS devices, packaging induced stress or stress induced structure deformation become increasing concerns since it directly affects the performance of the device. In this paper, deformation behavior of MEMS gyroscope package subjected to temparature change is investigated using high-sensitivity $Moir{\acute{e}}$ interferometry. Using the real-time $Moir{\acute{e}}$ setup, fringe patterns are recorded and analyzed at several temperatures. Temperature dependent analyses of warpages and extensions/contractions of the package are presented. Linear elastic behavior is documented in the temperature region of room temperature to $125^{\circ}C$. Analysis of the package reveals that global bending occurs due to the mismatch of thermal expansion coefficient between the chip, the molding compond and the PCB.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.1
• /
• pp.363-371
• /
• 2014

In this paper, a new super-resolution algorithm is proposed by using successive frames for generating high-resolution frames with better quality than those generated by other conventional interpolation methods. Generally, each frame used for super-resolution must only have global translation and motions of sub-pixel unit to generate good result. However, the newly proposed MSR algorithm in this paper is exempt from such constraints. The proposed algorithm consists of three main processes; motion estimation for image registration, normalization of motion vectors, and pattern analysis of edges. The experimental results show that the proposed algorithm has better performance than other conventional algorithms.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1994.10a
• /
• pp.605-610
• /
• 1994

Optimal design of fault-tolerant, spatial type maniplators is treated in this paper. Design objective is to guarantte three degree-of-freedom translational motions in the task space, upon failure of one arbitrary joint of 4 degree-of -freedom manipulators. Realizing the nonfault-tolerant characteristics of current, wrist-type industrial manipulators, several 4 degree-of-freedom redundant structures with one joint redundancy are suggested as the fault-tolerant spatial -type manipulators. Fault-tolerant charactersitics are investigated basedon the analysis of the self-motion and the null-space elements, of a redundant manipulator. Finally, in order to maximize the fault-tolerant capability,optimal design is performed for a spatial-type manipulator with respect to the global isotropic index, and the performance enhancement of the optimized case is shown by simulation.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.4 s.97
• /
• pp.122-128
• /
• 1999

Bolted joint assembly for nuclear power plants consists of various components : cover plate, retainer plate, manway flange, gasket and stud bolts/nuts. To guarantee the soundness of the joint, it is important to prevent leakage through the gasket and reduce the stress concentration factor at the thread root. In this paper, Submodeling technique for the finite element method is proposed to accurately compute three dimensional contact stresses which govern the sealing performance and the maximum contact stresses at the threads root. For verification of global solutions used as boundary conditions of submodel solution, the stresses on the cover plate and the manway flange are measured by strain gages when internal pressure is applied to the bolted joint assembly. The numerical results are compared with the experimental results.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.439-442
• /
• 2002

Powertrain simulation is important far the analysis of a vehicle performance. Automotive powertrain has been considered as the unified system and should be remodeled, whenever a powertrain system is changed. In this study, a new method is proposed far the synthetic modeling for the automotive powertrain. Components are separated from the powertrain system and constructed the matrix through dynamic relationships. The dynamic equation of the total powertrain system can be driven from the combination of each component. In order to combine each component, the superposition method is modified for the powertrain composition.