• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.40 no.12
• /
• pp.38-45
• /
• 2003

Recently, localized QoS routing scheme was recently proposed for overcome drawbacks of global state QoS routing schemes. Localized QoS routing dose not exchange QoS states among routers, but use virtual capacity based routing scheme instead. In localized QoS routing, to archive good performance, a set of candidate paths must be selected between the source and the destination effectively. In this paper we propose a few heuristics for effective path selection and develop path selection algorithms based on the heuristics. More detail analysis of the proposed algorithm is presented with simulation results which demonstrate that the path selection method can very affect the performance of localized QoS routing.

• Journal of Positioning, Navigation, and Timing
• /
• v.7 no.3
• /
• pp.147-153
• /
• 2018

Jamming countermeasures are used to decrease or prevent the impact of intentional jamming applied to degrade the quality of information provided by a global navigation satellite system (GNSS) receiver. The maximum performance of jamming countermeasure can be obtained only when a proper technique is applied according to the type of jammer. This paper suggests a jamming identification technique for providing information regarding the type of jamming. The center frequency and bandwidth of jammer signal are inconsistent and may change according to time, and thus a spectral correlation function and wavelet coherence were considered in order to analyze the signal in the time and frequency space. Because the two characteristics derive different analysis results, two different identification techniques were suggested and the performances thereof were analyzed. Numerical results show that the two identification techniques have relative advantages and disadvantages as to time consumed and performance. The suggested methods can sufficiently identify the jammer before the GNSS receiver becomes inoperable because of jamming.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.33 no.12
• /
• pp.968-976
• /
• 2009

As the global warming becomes a serious environmental problem, studies of reducing $CO_2$ emission in power generation area are in progress all over the world. One of the carbon capture and storage(CCS) technologies is known as oxy-fuel combustion power generation system. In the oxy-fuel combustion system, the exhaust gas is mainly composed of $CO_2$ and $H_2O$. Thus, high-purity $CO_2$ can be obtained after a proper $H_2O$ removal process. In this paper, an oxy-fuel combustion cycle that recovers the waste heat of a high-temperature fuel cell is analyzed thermodynamically. Variations of characteristics of $CO_2$ and $H_2O$ mixture which is extracted from the condenser and power consumption required to obtain highly-pure $CO_2$ gas were examined according to the variation of the condensing pressure. The influence of the number of compression stages on the power consumption of the $CO_2$ capture process was analyzed, and the overall system performance was also investigated.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.78
• /
• pp.145-174
• /
• 2018

This study, focused on Official Development Assistance(ODA) as a solution to the global polarization and demonstrated how corporate social responsibility (CSR) plays a role in raising the performance of ODA. First, socio - economic value and profit - created by CSV activities have a significant effect on constructing an economic reciprocal relationship between donor countries and recipient countries. In addition, it has shown that it promotes the simultaneous development of companies and society through the strategic CSR model and consequently contributes to the achievement of ODA. Second, it suggests that the elements of the BOP model have a significant effect on improving the unreasonable wage system and unethical working conditions of developing countries. Furthermore, this suggests that improving the income of the poor can improve the performance of ODA. Third, this study reconstructed 'CSR Pyramid' of Carrol and newly devised CSRD theory. In the case of ODA to developing countries, economic, legal, ethical, and charitable responsibilities are set priorities. In this study, it is suggested that the priority should be flexibly set as economic ${\rightarrow}$ charitable ${\rightarrow}$ ethical ${\rightarrow}$ legal responsibility. This study reexamines the strategic CSR model in the international management field and conducted empirical analysis on CSV, BOP, CSRD model as the constituent elements. In addition, the strategic CSR model that has moved away from the traditional and old-fashioned perspectives still has room for development, and exploratory research to develop the model will continue to contribute to clarifying the concept and scope of CSR.

• Journal of Internet Computing and Services
• /
• v.19 no.2
• /
• pp.89-98
• /
• 2018

Media industry is attempting various types of strategic innovation in the content and organization as they enter transition period. However, previous research has casually treated the organizational culture from the management and realized that cognitive/cultural differences between the specific departments yield conflicts. This means the researchers explored less on the decision-making process with the conflict between sub-groups and constituent in the organization. Our study reviewed the most positive method to achieve the innovation outcome through the conflict management within the organization based on the behavioral theory of the firm and applied computer simulation model for analysis to construct the quantitative scenario and infer the result. Conflict always found while media organization experiences innovation within the groups. However, in the long term, securing the independence through the certain state of 'anarchy' which possibly lead consensus implies significance rather to comprise collegiate system for unilateral control. In specific, this study explored the issues in 'conflict management' that has been evaded in media organization research through NK simulation model.

• Structural Engineering and Mechanics
• /
• v.58 no.5
• /
• pp.905-929
• /
• 2016

This paper assesses efficiency of the continuum method as the idealized system of building structures. A modified Coupled Two-Beam (CTB) model equipped with classical and non-classical damping has been proposed and solved analytically. In this system, complementary (non-classical) damping models composed of bending and shear mechanisms have been defined. A spatial shear damping model which is non-homogeneously distributed has been adopted in the CTB formulation and used to equivalently model passive dampers, viscous and viscoelastic devices, embedded in building systems. The application of continuum-based models for the dynamic analysis of shear wall systems has been further discussed. A reference example has been numerically analyzed to evaluate the efficiency of the presented CTB, and the optimization problems of the shear damping have been finally ascertained using local and global performance indices. The results reveal the superior performance of non-classical damping models against the classical damping. They show that the critical position of the first modal rotation in the CTB is reliable as the optimum placement of the shear damping. The results also prove the good efficiency of such a continuum model, in addition to its simplicity, for the fast estimation of dynamic responses and damping optimization issues in building systems.

• Structural Engineering and Mechanics
• /
• v.42 no.5
• /
• pp.631-644
• /
• 2012

Current seismic codes require from the seismically designed structures to be capable to withstand inelastic deformation. Many studies dealt with the development of different inelastic spectra with the aim to simplify the evaluation of inelastic deformation and performance of structures. Recently, the concept of inelastic spectra has been adopted in the global scheme of the performance-based seismic design through capacity-spectrum methods. In this paper, the median of the ductility demand ratio for 80 ground motions are presented for different levels of normalized yield strength, defined as the yield strength coefficient divided by the peak ground acceleration (PGA). The influence of the post-to-preyield stiffness ratio on the ductility demand is investigated. For fixed levels of normalized yield strength, the median ductility versus period plots demonstrated that they are independent of the earthquake magnitude and epicentral distance. Determined by regression analysis of the data, two design equations have been developed; one for the ductility demand as function of period, post-to-preyield stiffness ratio, and normalized yield strength, and the other for the inelastic deformation as function of period and peak ground acceleration valid for periods longer than 0.6 seconds. The equations are useful in estimating the ductility and inelastic deformation demands for structures in the preliminary design. It was found that the post-to-preyield stiffness has a negligible effect on the ductility factor if the yield strength coefficient is greater than the PGA of the design ground motion normalized by gravity.

• Earthquakes and Structures
• /
• v.10 no.6
• /
• pp.1467-1486
• /
• 2016

This research focuses on seismic performance of a class of single pier skewed bridges with three different pier-deck connections; skew angles vary from $0^{\circ}$ to $60^{\circ}$. A well-documented four span continuous deck bridge has been modeled and verified. Seat-type connections with fixed and sliding bearings plus monolithic pier-deck connections are studied. Shear keys are considered either fully operational or ineffective. Seismic performances of the bridges and the structural components are investigated conducting bidirectional nonlinear time history analysis in OpenSees. Several global and intermediate engineering demand parameters (EDP) have been studied. On the basis of results, the values of demand parameters of skewed bridges, such as displacement and rotation of the deck plus plastic deformation and torsional demand of the piers, increase as the skew angle increases. In order to eliminate the deck collapse probability, the threshold skew angle is considered as $30^{\circ}$ in seat-type bridges. For bridges with skew angles greater than $30^{\circ}$, monolithic pier-deck connections should be applied. The functionality of shear keys is critical in preventing large displacements in the bearings. Pinned piers experience considerable ductility demand at the bottom.

• Journal of the Semiconductor & Display Technology
• /
• v.13 no.2
• /
• pp.45-52
• /
• 2014

This paper proposes an efficient photo retrieval system that automatically indexes for searching of relevant images, using a combination of geo-coded information, direction/location of image capture device and content-based visual features. A photo image is labeled with its GPS (Global Positioning System) coordinates and direction of the camera view at the moment of capture, and the label leads to generate a geo-spatial index with three core elements of latitude, longitude and viewing direction. Then, content-based visual features are extracted and combined with the geo-spatial information, for indexing and retrieving the photo images. For user's querying process, the proposed method adopts two steps as a progressive approach, filtering the relevant subset prior to use a content-based ranking function. To evaluate the performance of the proposed scheme, we assess the simulation performance in terms of average precision and F-score, using a natural photo collection. Comparing the proposed approach to retrieve using only visual features, an improvement of 20.8% was observed. The experimental results show that the proposed method exhibited a significant enhancement of around 7.2% in retrieval effectiveness, compared to previous work. These results reveal that a combination of context and content analysis is markedly more efficient and meaningful that using only visual feature for image search.

• Journal of the Semiconductor & Display Technology
• /
• v.19 no.1
• /
• pp.42-48
• /
• 2020

As global warming accelerates, eco-friendly electric cars are being developed to reduce carbon dioxide emissions, and power conversion inverters are used to drive motors. Among inverter components, DC-link capacitor is heated by high current usage, which causes problems such as performance and life-saving of inverter. Although metal cases with good thermal performance have been used to solve this problem, it is difficult to apply them in practice due to insulation problems with other parts. In this paper, the Heat-Generation influence factor of DC-link capacitor is analyzed. Variables on heat-generation are set at 3 levels for film width, inductance, and film thickness. Box-Behnken to 13 tests using the design and minimal deviations, e.g. through the experiment three times by each level. The surface of the film k type by attaching the sensor current is measured temperature. Capacitance was set to a minimum level of 200 ㎌ and had a frequency of 16 kHz with Worst case, ambient temperature of 85℃ and a ripple current of 50 Ams was applied. The temperature at the measurement point was collected in the data logger after sampling at 1 minute intervals for 2 hours after saturation with the ambient temperature. This experiment confirmed that setup factors are correlated with heat-generation.