• Title/Summary/Keyword: global performance analysis

Search Result 1,369, Processing Time 0.026 seconds

An Effective Performance Monitoring and Analysis for a Web Cluster on a Distributed System (분산 시스템의 효과적인 웹 클러스터 성능 모니터링과 분석)

  • Kim, Ki;Choi, Eun-Mi
    • Annual Conference of KIPS
    • /
    • 2003.11a
    • /
    • pp.209-212
    • /
    • 2003
  • 인터넷 서비스 서버들의 가용성과 확장성, 부하분산의 특성들을 가지는 클러스터 시스템에서 성능관리와 이상상황관리를 위해서 본 논문에서는 성능 모니터링을 통하여 클러스터 시스템으로부터 필요한 자료를 수집할 수 있는 구조와 성능 분석을 위한 수집해야하는 정보들의 분석과 수집된 데이터를 분석하기 위한 다양한 분석 방법론을 제시한다. 이러한 성능 분석을 통해 자원사용, 확장성 가용성, 부하분산, 서비스의질, 이상상황 추적 등을 고려하였다.

  • PDF

An Introduction to TLP Tendon Body Design (TLP Tendon Body 설계 소개)

  • Kim, Deok-Su
    • Special Issue of the Society of Naval Architects of Korea
    • /
    • 2006.09a
    • /
    • pp.15-22
    • /
    • 2006
  • Global strength check for TLP tendon body can be estimated based on maximum tendon tensions and bending moments, which are resulted in TLP global performance analysis. Final tendon length, especially thread length on Length Adjustment Joint, is easily calculated with water depth at TLP in-place location, TLP lock-off draft and unlocking length of tendon bottom section. And LAJ thread length, which is locked with TLP top tendon connector, should be carefully determined with tendon design and installation tolerances.

  • PDF

Trust-Tech based Parameter Estimation and its Application to Power System Load Modeling

  • Choi, Byoung-Kon;Chiang, Hsiao-Dong;Yu, David C.
    • Journal of Electrical Engineering and Technology
    • /
    • v.3 no.4
    • /
    • pp.451-459
    • /
    • 2008
  • Accurate load modeling is essential for power system static and dynamic analysis. By the nature of the problem of parameter estimation for power system load modeling using actual measurements, multiple local optimal solutions may exist and local methods can be trapped in a local optimal solution giving possibly poor performance. In this paper, Trust-Tech, a novel methodology for global optimization, is applied to tackle the multiple local optimal solutions issue in measurement-based power system load modeling. Multiple sets of parameter values of a composite load model are obtained using Trust-Tech in a deterministic manner. Numerical studies indicate that Trust-Tech along with conventional local methods can be successfully applied to power system load model parameter estimation in measurement-based approaches.

Performance Analysis of Registration Delay Time by Varying Number of foreign Agent in Regional Registration (지역 등록 방법에서 외부 에이전트 수의 변화에 따른 등록 지연시간의 성능분석)

  • 이용덕;곽경섭
    • Journal of Korea Multimedia Society
    • /
    • v.7 no.1
    • /
    • pp.106-112
    • /
    • 2004
  • Mobile IP is a solution for mobility on the global Internet. However, it causes service delay incase of frequent movement of mobile node and mobile users. Mobile IP regional registration is Proposed to reduce the service delay. In this paper, we introduce an optimal regional location management mechanism for Mobile IP that reduces the registration delay. The movement of mobile node is described by a discrete analytical model. The proposed model explains analytically average packet rate and registration cost as the size of regional networks with mobility of mobile node.

  • PDF

Nonlinear Control for A Robot Manipulator (로봇 매니퓰레이터에 대한 비선형 제어)

  • 이종용;이상효
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.17 no.12
    • /
    • pp.1333-1342
    • /
    • 1992
  • This paper deals with a robot manipulator having actuator which is described by equation $D(q)\ddot{q}=u-P(q\;\dot{q},\;\ddot{q})$ where u(t) is a control input. We employ two steps of controller design procedures. First, a global linearization is performed to yield a decoupled controllable linear system. Then a controller is designed for this linear system. We provide a rigorous analysis of the effect of uncertainty of the dynamics, which we study using robustness results in time domain based on a Lyapunov equation and the total stability theorem. Using this approach we simulate the performance of controller of a robot manipulator.

  • PDF

A Comparison Study on the Simplified Formulae for Ship Motion and Global Loads in Waves (선박의 거동 및 파랑하중 계산을 위한 약산식 비교 검토)

  • Choi, Mun-Gwan;Park, In-Kyu;Koo, Weoncheol
    • Journal of the Society of Naval Architects of Korea
    • /
    • v.49 no.6
    • /
    • pp.534-540
    • /
    • 2012
  • The global performance of various ships estimated by simplified formulae of classification societies is compared with the numerical results by a strip-theory-based whipping analysis program including slamming impact(USLAM). Heave acceleration, pitch angle and the vertical acceleration are compared and the effectiveness of simplified formulae is evaluated. Four different ship models are used for comparison study, which include S175, Flokstra, 6000TEU and 8100TEU container ships. In order to verify the numerical results, the vertical bending moment of S175 is compared with the results of ITTC workshop data.

OPTIMIZATION OF A DRIVER-SIDE AIRBAG USING KRIGING AND TABU SEARCH METHODS (크리깅과 타부탐색법을 이용한 운전석 에어백의 최적설계)

  • Kim, Jeung-Hwan;Lee, Kwom-Hee;Joo, Won-Sik
    • Proceedings of the KSME Conference
    • /
    • 2004.04a
    • /
    • pp.1035-1040
    • /
    • 2004
  • In the proto design stage of a new car, the performance of an occupant protection system is often evaluated by CAE instead of the real test. CAE predicts and recommends the appropriate design values hence reducing the number of the real tests. However, the existing researches using CAE in predicting the performances do not consider the uncertainties of parameters, in which inconsistency between the actual test results and CAE exists. In this research, the optimization procedure of a protection system such as airbag and load limiter is suggested for the frontal collision. The DACE modeling known as Kriging interpolation is introduced to obtain the meta model of the system followed by the tabu search method to determine a global optimum. Finally, the distribution of a suggested design is determined through the Monte-Carlo Simulation.

  • PDF

The Introduction and Application of the Global Supply Chain Management in Korean Trading Companies (한국무역기업의 글로벌 공급체인관리(Global Supply Chain Management) 도입 및 발전방안)

  • 김종칠
    • Journal of Korea Port Economic Association
    • /
    • v.19 no.2
    • /
    • pp.221-239
    • /
    • 2003
  • In the last decade, the issue of supply chain management(SCM) has emerged as a significant topic in the logistics literature in the developed countries. Also recently the concept of SCM has generated considerable interest in korean firms. However, there has been little systematic analysis of the experience of those companies that have used such SCM philosophy. This paper studies introduction and Application of Korean Trading Companies using SCM philosophy. This study forcuses on how Korean firms can use the SCM by reinforcing their logistics systems. The objectives of this paper are. 1. To develop an understanding of the forces that have created an interest in SCM. 2. To examine the obstacles encountered in implementing SCM. 3. To suggest the impact of the use of SCM and the directions for institutional Development.

  • PDF

Monitoring social networks based on transformation into categorical data

  • Lee, Joo Weon;Lee, Jaeheon
    • Communications for Statistical Applications and Methods
    • /
    • v.29 no.4
    • /
    • pp.487-498
    • /
    • 2022
  • Social network analysis (SNA) techniques have recently been developed to monitor and detect abnormal behaviors in social networks. As a useful tool for process monitoring, control charts are also useful for network monitoring. In this paper, the degree and closeness centrality measures, in which each has global and local perspectives, respectively, are applied to an exponentially weighted moving average (EWMA) chart and a multinomial cumulative sum (CUSUM) chart for monitoring undirected weighted networks. In general, EWMA charts monitor only one variable in a single chart, whereas multinomial CUSUM charts can monitor a categorical variable, in which several variables are transformed through classification rules, in a single chart. To monitor both degree centrality and closeness centrality simultaneously, we categorize them based on the average of each measure and then apply to the multinomial CUSUM chart. In this case, the global and local attributes of the network can be monitored simultaneously with a single chart. We also evaluate the performance of the proposed procedure through a simulation study.

Digital Transformation Enablers and Barriers in the Economy of Kazakhstan

  • ALIBEKOVA, Gulnaz;MEDENI, Tunc;PANZABEKOVA, Aksana;MUSSAYEVA, Dinara
    • The Journal of Asian Finance, Economics and Business
    • /
    • v.7 no.7
    • /
    • pp.565-575
    • /
    • 2020
  • This study aims to analyze the digital performance of Kazakhstan through dynamic analysis of national statistics and international indices as Global Innovation Index and ICT Development Index. The research combines three stages: analysis of digital transformation policies performance, review of ICT industry development, and comparative analysis of the positions of Kazakhstan, Turkey and South Korea as a benchmark in the international indices. This research findings show that despite great efforts of Kazakhstan in digitalization, the ICT industry contribution does not increase, it even falls. The international indices demonstrate that the reason is the weakness of the country in skills, venture capital, and innovation linkages. This leads to low knowledge, technology outputs, and creative outputs. The enablers of digital and overall innovation advancement of economy are identified. According to the international rankings the country has been doing its best in Access and Use areas. Another enablers are good business environment, ease of starting a business, protecting minority investors, and FDI inflows. The findings help to draw recommendations for strategic directions in order to improve the digital performance in Kazakhstan. The main limitation of this study is a lack of dynamic information on positions of Kazakhstan in other international indices related to digitalization.