• Ocean Systems Engineering
• /
• v.8 no.4
• /
• pp.427-439
• /
• 2018

Floating Production Storage and Offloading (FPSO) units have the advantages of their ability to provide storage and offloading capabilities which are not available in other types of floating production systems. In addition, FPSOs also provide a large deck area and substantial topsides payload capacity. They are in use in a variety of water depths and environments around the world. It is a good solution for offshore oil and gas development in fields where there is lack of an export pipeline system to shore. However due to their inherently high motions in waves, they are limited in the types of risers they can host. The Low Motion FPSO (LM-FPSO) is a novel design that is developed to maintain the advantages of the conventional FPSOs while offering significantly lower motion responses. The LM-FPSO design generally consists of a box-shape hull with large storage capacity, a free-hanging solid ballast tank (SBT) located certain distance below the hull keel, a few groups of tendons arranged to connect the SBT to the hull, a mooring system for station keeping, and a riser system. The addition of SBT to the floater results in a significant increase in heave, roll and pitch natural periods, mainly through the mass and added mass of the SBT, which significantly reduces motions in the wave frequency range. Model tests were performed at the Korea Research Institute of Ships & Ocean Engineering (KRISO) in the fall of 2016. An analytical model of the basin model (MOM) was created in Orcaflex and calibrated against the basin-model. Good agreement is achieved between global performance results from MOM's predictions and basin model measurements. The model test measurements have further verified the superior motion response of LM-FPSO. In this paper, numerical results are presented to demonstrate the comparison and correlation of the MOM results with model test measurements. The verification of the superior motion response through model test measurements is also presented in this paper.

• International Journal of Concrete Structures and Materials
• /
• v.6 no.4
• /
• pp.209-220
• /
• 2012

Post-earthquake fire (PEF) can lead to a rapid collapse of buildings that have been partially damaged as a result of a prior earthquake. Almost all standards and codes for the design of structures against earthquake ignore the risk of PEF, and thus buildings designed using those codes could be too weak when subjected to a fire after an earthquake. An investigation based on sequential analysis inspired by FEMA356 is performed here on the immediate occupancy (IO), life safety (LS) and collapse prevention (CP) performance levels of two portal frames, after they are pushed to arrive at a certain level of displacement corresponding to the mentioned performance level. This investigation is followed by a fire analysis of the damaged frames, examining the time taken for the damaged frames to collapse. As a point of reference, a fire analysis is also performed for undamaged frames and before the occurrence of earthquake. The results indicate that while there is minor difference between the fire resistances of the fire-alone situation and the frames pushed to the IO level of performance, a notable difference is observed between the fire-alone analysis and the frames pushed to arrive at LS and CP levels of performance and exposed to PEF. The results also show that exposing only the beams to fire results in a higher decline of the fire resistance, compared to exposing only the columns to fire. Furthermore, the results show that the frames pushed to arrive at LS and CP levels of performance collapse in a global collapse mode laterally, whereas at the IO level of performance and fire-alone situation, the collapse mechanism is mostly local through the collapse of beams. Whilst the investigation is conducted for a certain class of portal frames, the results confirm the need for the incorporation of PEF into the process of analysis and design, and provide some quantitative measures on the level of associated effects.

• Journal of Korea Trade
• /
• v.26 no.1
• /
• pp.57-80
• /
• 2022

Purpose - This study aims to examine the relationships between the acceptance of the 4th industrial revolution logistics technology, logistics safety behavior, and logistics safety performance, as well as the moderated mediating effects of logistics safety behavior through safety culture in Korea. Design/methodology - Research models and hypotheses were established based on prior research related to the 4th industrial revolution logistics technology, logistics safety, and logistics performance. The survey was conducted on the employees of logistics companies, and reliability analysis, confirmatory factor analysis, discriminant validity analysis, structural equation model analysis, and mediating effect analysis were performed. In addition, the moderated mediating effect analysis applying SPSS Process Model No. 7 was conducted. Findings - Usefulness and sociality of the acceptance of the 4th industrial revolution logistics technology had a significant effect on logistics safety behavior. Ease of use, sociality, and efficiency had meaningful effect on logistics safety performance. And in the relationships between the acceptance of logistics technology and logistics safety performance, logistics safety behavior had a significant mediating effect. But the moderated mediating effect of safety behavior through safety culture was not significant. Logistics companies can improve logistics safety performance through the utilization of new logistics technologies such as intelligent logistics robots, autonomous driving technology, and artificial intelligence, etc. Originality/value - This is the first study to analyze the relationships between the acceptance of logistics technology in the 4th industrial revolution and logistics safety. In addition, previous studies analyzed mediating effects or moderating effects, but this is the first study to identify the moderated mediating effects of safety behavior through safety culture. In other words, it has originality in terms of research methodology.

• Structural Engineering and Mechanics
• /
• v.66 no.5
• /
• pp.609-619
• /
• 2018

When the irregularities occurred in buildings, affect their seismic performance. This paper has focused on one of the types of irregularities at the height that named setback in elevation. For this purpose, several multistorey Reinforced Concrete Moment Resisting Frames (RCMRFs) with different types of setbacks were designed according to new edition of Iranian seismic code. The nonlinear time history analysis was performed to predict the seismic performance of frames subjected to seven input ground motions. The assessment of the seismic performance was done considering both global and local criteria. Results showed that the current edition of Iranian seismic code needs to be modified in order to improve the seismic behaviour of reinforced concrete moment resisting setback buildings. It was also shown that the maximum damages happen at the elements located in the vicinity of the setbacks. Therefore, it is necessary to strengthen these elements by appropriate modification of Iranian seismic code.

• Structural Engineering and Mechanics
• /
• v.27 no.6
• /
• pp.671-682
• /
• 2007

The probability and the reliability-based seismic performance evaluation procedure proposed in the FEMA-355F was applied to a reinforced concrete moment frame building in this study. For the FEMA procedure, which was originally developed for steel moment frame structures, to be applied to other structural systems, the capacity should be re-defined and the factors reflecting the uncertainties related to capacity and demand need to be determined. To perform the evaluation procedure a prototype building was designed per IBC 2003, and inelastic dynamic analyses were conducted applying site-specific ground motions to determine the parameters for performance evaluation. According to the analysis results, distribution of the determined capacities turned out to be relatively smaller than that of the demands, which showed that the defined capacity was reasonable. It was also shown that the prototype building satisfied the target performance since the determined confidence levels exceeded the objectives for both local and global collapses.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.55 no.2
• /
• pp.78-82
• /
• 2006

This paper is proposed genetic algorithm tuning(GAT) control)or for high performance of induction motor drive. We employed GA to the classical PI controller. The approach having ability for global optimization and with good robustness, is expected to overcome some weakness of conventional approaches and to be more acceptable for industrial practices. The control performance of the GAT PI controller is evaluated by analysis for various operating conditions. The results of experiment prove that the proposed control system has strong high performance and robustness to parameter variation, and steady-state accuracy and transient response.

• Asia Marketing Journal
• /
• v.25 no.2
• /
• pp.71-83
• /
• 2023

Companies are increasingly performing corporate social responsibility (CSR) as part of their strategic plans, but the effect of CSR activities on short-term financial performance is disputed. Researchers have found ambiguous relationships through mediating factors, but few studies have investigated internal stakeholders in this context and the firm characteristics that moderate these relationships. This study uses a competitive mediating model that examines job satisfaction as a mediator in the relationship between CSR and short-term financial performance for Korean companies. For the analysis, data from 195 companies covering 2014 to 2017 were collected and analyzed via panel regression. The findings indicate that CSR activities had a negative effect on short-term financial performance but a positive effect on job satisfaction; however, the larger the firm, the smaller the positive effect of CSR activities. Moreover, job satisfaction positively affects short-term financial performance, and this relationship is stronger in service firms.

• Journal of the Korean Home Economics Association
• /
• v.44 no.10
• /
• pp.9-20
• /
• 2006

Due the globalization trends of industry environment, not only fashion companies of the developed countries but also those of NICs and the developing countries are pursuing to globalize their businesses. This study was conducted (i) to identify the characteristics of international marketing mix of Korean fashion companies operating in oversea fashion markets and (ii) to analyze the performance of Korean fashion companies related to international marketing mix. The data were collected from inter-Korean fashion enterprises. A questionnaire was distributed to a person in charge of international division/international trade division who doing business in domestic market and a person in charge of a local subsidiary in oversea market. The methods of analysis used in this study were factor analysis, cluster analysis, and one-way ANOVA. The results of this study are as follows: First, according to factor analysis and cluser analysis, Korean fashion companies were classified in four (4) clusters. The fashion companies in Cluster I put their priority on price. The companies in Cluster II are traditional fashion companies which have relatively low power of product and price. The companies in Cluster III put their priority on product, and the companies in Cluster IV put their priority on local market. Second, according to ANOVA, a growth rate of sales make significant difference among 4 clusters and Clusters II and III were comparatively high in performance.

• International Area Studies Review
• /
• v.22 no.4
• /
• pp.145-166
• /
• 2018

This study is due to global competition, the wall between regions is disappearing, customer needs are diversified, and market and technology are rapidly changing. Future growth engines, the importance of convergence capabilities for industrial competitiveness is being emphasized more. Therefore, companies should seek innovative means to increase the efficiency of the company by establishing optimized global management environment and establishing direction and strategy for utilization of convergence technology by improving industrial competitiveness. Firms must adopt and utilize related new technologies by strengthening their convergence capabilities through dynamic capabilities that are internal resource bases for new product development and process innovation. Globalize markets and technologies can expect higher innovation performance when aligning strategic direction with formalized technology competencies held by the firm and incorporating the convergence capabilities needed for technological innovation into processes. The study focuses on the effects of market and technology orientation on technological innovation performance, whether dynamic and convergence capabilities affect technological innovation performance, and dynamic and convergence capabilities to mediate between market and technology orientation. For the study, we surveyed 51.4% of global and multinational corporations that are internationally active or headquartered overseas. Based on the previous studies, hypotheses were established and the collected data were analyzed through utilization path analysis and Sobel test.

• Korea Trade Review
• /
• v.45 no.4
• /
• pp.45-63
• /
• 2020

This study aims to identify the dimensions of trade show performance in Iranian trade shows and apply the revised importance-performance analysis. The IPA method integrates two types of indirect importance and a composite I-P mapping using traditional four-quadrants, as well as a diagonal line on a two-dimensional grid. Based on the analysis results, this study presents several suggestions to contribute to the development of the trade show industry. First, it is noted that the dimensionality of trade show performance in a developing country context can be different from that of prior literature. Taking different industry development stages of a show hosting countries, examining the dimensions of each trade show performance with every effort to derive proper exhibitors' implications is necessary. Second, the use of statically-derived importance is recommended while considering respondents' convenience to reduce their time and fatigue when collecting data at the busy booths. Further, applying composite I-P mapping is suggested as an effective diagnostic tool to provide optimal trade show strategies for the exhibitors under the dynamic and ever-changing global business environment.