• Ocean Systems Engineering
• /
• v.4 no.3
• /
• pp.215-241
• /
• 2014

Steel catenary riser (SCR) is a popular/economical solution for the oil/gas production in deep and ultra-deep water. The behavioral characteristics of SCR have a high correlation with the motion of floating production facility at its survival and operational environments. When large motions of surface floaters occur, such as FPSO in 100-yr storm case, they can cause unacceptable negative tension on SCR near TDZ (touch down zone) and the corresponding elastic deflection can be large due to local dynamic buckling. The generation, propagation, and decay of the elastic wave are also affected by SCR and seabed soil interaction effects. The temporary local dynamic buckling vanishes with the recovery of tension on SCR with the upheaval motion of surface floater. Unlike larger-scale, an-order-of-magnitude longer period global buckling driven by heat and pressure variations in subsea pipelines, the sub-critical local dynamic buckling of SCR is motion-driven and short cycled, which, however, can lead to permanent structural damage when the resulting stress is greatly amplified beyond the elastic limit. The phenomenon is extensively investigated in this paper by using the vessel-mooring-riser coupled dynamic analysis program. It is found that the moment of large downward heave motion at the farthest-horizontal-offset position is the most dangerous for the local dynamic buckling.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.10 no.5
• /
• pp.13-20
• /
• 2010

We proposed a new technique to perform fast video stabilization using integral image in this article. In the proposed technique, it evaluate local and global motion by the block matching using the generated integral image for each frame and compensate the motion like jitter. We made the various experimental jitter patterns to evaluate the effectiveness of the proposed technique and evaluated stabilization capability and execution time with the existing ones. Through the experiment, we found that the execution time of proposed technique was faster than that of existing techniques and the compensation of jitter was well done.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.1
• /
• pp.360-373
• /
• 2017

This paper presents a novel digital video steganalysis scheme against the spatial domain video steganography technology based on a spatial temporal detector (ST_D) that considers both spatial and temporal redundancies of the video sequences simultaneously. Three descriptors are constructed on XY, XT and YT planes respectively to depict the spatial and temporal relationship between the current pixel and its adjacent pixels. Considering the impact of local motion intensity and texture complexity on the histogram distribution of three descriptors, each frame is segmented into non-overlapped blocks that are $8{\times}8$ in size for motion and texture analysis. Subsequently, texture and motion factors are introduced to provide reasonable weights for histograms of the three descriptors of each block. After further weighted modulation, the statistics of the histograms of the three descriptors are concatenated into a single value to build the global description of ST_D. The experimental results demonstrate the great advantage of our features relative to those of the rich model (RM), the subtractive pixel adjacency model (SPAM) and subtractive prediction error adjacency matrix (SPEAM), especially for compressed videos, which constitute most Internet videos.

• Journal of The Korean Society of Integrative Medicine
• /
• v.5 no.2
• /
• pp.83-90
• /
• 2017

Purpose : The purpose of this study was to investigate the correlation between shoulder gradient, range of motion of the neck, and subjective pain level of the potential risk group of smart-phone addiction. Methods : The subjects of this study were 90 women's who had potential risk of smart-phone addiction. VAS was used to measure subjectively pain intensity. Global Postural System was used to measure forward head posture. CROM was used to measure flexion, extension, lateral flexion of cervical range of motion. Results : The results of this study showed that was significant positive correlation between the both shoulder gradient, and cervical range of motion(p<.05). Statistically significant negative correlation between the VAS and left lateral flexion(p<.05). Conclusions : The difference between the gradient of both shoulders increased with the use of smart-phone addiction, and the cervical left lateral flexion decreased as the pain increased. This suggests that recognition on decrease of using smart phone and postural correction is necessary.

• Fisheries and Aquatic Sciences
• /
• v.17 no.1
• /
• pp.145-153
• /
• 2014

The motion of the otter board on a trawl can affect the motion of trawl nets, and the motion of the codend can affect fish selectivity. Preliminary measurements of the tilt of bottom trawl gear were carried out to compare the tilts of the otter board and codend. The tilt of the otter board was measured by Vector and tilt at 1.5 m anterior to the end of the codend, and the middle upper panel was measured with a micro-DST-tilt logger. Tilt data such as yaw, pitch, and roll were analyzed by the fast Fourier transformation method and global wavelet and event analyses for the period or amplitude. The mean period ${\pm}$ standard deviation of the tilt in the otter board, $(5-6){\pm}2s$, was similar to the period of the codend, $(4-6){\pm}(2-3)s$, whereas the amplitude of the codend was greater than that of the otter board. The yaw and pitch periods were not significantly different between the otter board and codend, but roll was different. Furthermore, the tilt period frequencies of the otter board and codend were not significantly different. Accordingly, the tilt motion of the codend was mostly related to the tilt of the otter board.

• Journal of Korea Game Society
• /
• v.19 no.3
• /
• pp.15-24
• /
• 2019

Many limitations arise when using washout algorithms to calibrate input values in VR content-making environments using VR HMD and motion platforms. Thus, in this study, we designed a new fabrication method using a control object that turns acceleration into a rotational motion. A total of 30 people were tested to see if the improved method was better than the existing one. The results showed significant differences that the improved method is better for realism, immersion and ride comfort.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.8C
• /
• pp.1175-1183
• /
• 2004

This paper propose a method to trace a moving object based on the information directly obtained from MPEG-2 compressed video stream without decoding process. In the proposed method, the motion flow is constructed from the motion vectors involved in compressed video and then we calculate the amount of pan, tilt, zoom associated with camera operations using generalized Hough transform. The local object motion can be extracted from the motion flow after the compensation with the parameters related to the global camera motion. The moving object is designated initially by a user via bounding box. After then automatic tracking is performed based on the mean-shift algorithm of the motion flows of the object. The proposed method can improve the computation speed because the information is directly obtained from the MPEG-2 compressed video, but the object boundary is limited by blocks rather than pixels.

• Journal of Institute of Control, Robotics and Systems
• /
• v.20 no.1
• /
• pp.70-77
• /
• 2014

This paper proposes a novel localization algorithm based on ego-motion which used Lucas-Kanade Optical Flow and warping image obtained through fish-eye lenses mounted on the robots. The omnidirectional image sensor is a desirable sensor for real-time view-based recognition of a robot because the all information around the robot can be obtained simultaneously. The preprocessing (distortion correction, image merge, etc.) of the omnidirectional image which obtained by camera using reflect in mirror or by connection of multiple camera images is essential because it is difficult to obtain information from the original image. The core of the proposed algorithm may be summarized as follows: First, we capture instantaneous $360^{\circ}$ panoramic images around a robot through fish-eye lenses which are mounted in the bottom direction. Second, we extract motion vectors using Lucas-Kanade Optical Flow in preprocessed image. Third, we estimate the robot position and angle using ego-motion method which used direction of vector and vanishing point obtained by RANSAC. We confirmed the reliability of localization algorithm using ego-motion based on fisheye warping image through comparison between results (position and angle) of the experiment obtained using the proposed algorithm and results of the experiment measured from Global Vision Localization System.

• Journal of Internet of Things and Convergence
• /
• v.8 no.5
• /
• pp.41-46
• /
• 2022

This study analyzed the results and implications of the industry-university cooperation human resource nurturing process based on the I-O model for the Motion Graphics major and the Global Hotelier major in Baek seok University. In this study, based on the analysis of the human resources training performance through industry-university cooperation in the motion graphics and hotelier fields for 5 years, what kind of efforts were made for successful human resource training, and the level of performance was analyzed and improvement points were suggested. In this study, four strategies were set for successful industry-university-tailored human resource nurturing: student-industry matching through industry participation in education, industry-university integrated education, education quality advancement, and customized education infrastructure construction. As a result of the analysis, customized human resource training should first be developed through industry demand survey and a mirror-type practice room should be built to fit the corporate environment. Second, it was found that it is possible to be individual only if there is an active participation of industry experts throughout the curriculum such as subjects and non-subjects.

• Atmosphere
• /
• v.17 no.1
• /
• pp.1-15
• /
• 2007

A constraint based on climatology is introduced to the cost function of the three-dimensional variational assimilation (3dVar) to correct the error of the zonal mean wind structure in the global data assimilation system at Korea Meteorological Administration (KMA). The revised cost function compels the analysis fit to the chosen climatology while keeping the balance between the variables in the course of analysis. The constraint varies selectively with the vertical level and the horizontal scale of the motion. The zonally averaged wind field from European Centre for Medium-Range Weather Forecasts Re-Analysis 40 (ERA-40) is used as a climatology field in the constraint. The constraint controls only the zonally averaged stratospheric long waves with total wave number less than 20 to fix the error of the large scale wind field in the stratosphere. The constrained 3dVar successfully suppresses the erroneous westerly in the stratospheric analysis promptly, and has been applied on the operational global 3dVar system at KMA.