• Journal of Information Technology Services
• /
• v.21 no.6
• /
• pp.127-145
• /
• 2022

Luna Coin, which ranked eighth in the global market capitalization and established itself as a super-large stablecoin, plunged overnight, shocking the market. Therefore, this study proposed the direction of Korea's stablecoin regulation, focusing on the Terra-Luna situation, starting with the question of whether the stable coin's value, 'stability', can be trusted. The whole story of the Terra-Luna incident was examined in depth and the problems were pointed out, and the direction of domestic stable coin regulation was described based on overseas cases. In the absence of any legal guidelines for stablecoin at the moment, we hope that this study will provide a minimum stabilizer in the virtual asset market and help protect investors.

• Advances in aircraft and spacecraft science
• /
• v.9 no.5
• /
• pp.433-447
• /
• 2022

This work deals with an explicit guidance and control architecture for autonomous lunar ascent and orbit injection, i.e., the locally-flat near-optimal guidance, accompanied by nonlinear reduced-attitude control. This is a new explicit guidance scheme, based on the local projection of the position and velocity variables, in conjunction with the real-time solution of the associated minimum-time problem. A recently-introduced quaternion-based reduced-attitude control algorithm, which enjoys quasi-global stability properties, is employed to drive the longitudinal axis of the ascent vehicle toward the desired direction. Actuation, based on thrust vectoring, is modeled as well. Extensive Monte Carlo simulations prove the effectiveness of the guidance, control, and actuation architecture proposed in this study for precise lunar orbit insertion, in the presence of nonnominal flight conditions.

• The Bulletin of The Korean Astronomical Society
• /
• v.46 no.1
• /
• pp.50.1-50.1
• /
• 2021

Gravitational instability (GI) can produce massive gas giants on wide orbits by fragmentation of protoplanetary disks (PPDs). While most previous works focus on PPDs around solar mass stars, gas giants have been observed in systems with a wide range of stellar masses including M dwarfs. We use the GIZMO code to perform global three-dimensional simulations of self-gravitating disks around low-mass stars. Our models consider heating by turbulent viscosity and stellar irradiation and the β cooling occurring over the dynamical time. We run various models with differing disk-to-star mass ratio q and disk temperature. We find that strongly gravitating disks either produce spirals or undergo fragmentation. The minimum q value for fragmentation is 0.2-0.7, with a smaller value corresponding to a more massive star and/or a smaller disk. The critical q value depends somewhat sensitively on the disk temperature, suggesting that the stellar irradiation is an important factor in determining GI. We discuss our results in comparison with previous work as well as recent ALMA observations.

• Journal of Environmental Impact Assessment
• /
• v.26 no.2
• /
• pp.114-126
• /
• 2017

Many studies on climate change and its impacts use a single climate scenario. However, one climate scenario may not accurately predict the potential impacts of climate change. We estimated temperature and precipitation changes by 2070 using 17 of the CMIP5 Global Climate Models (GCMs) and two emission scenarios for three spatial domains: the Asian continent, six East Asia countries, and South Korea. For South Korea, the range of increased minimum temperature was lower than for the ranges of the larger regions, but the range of projected future precipitation was higher. The range of increased minimum temperatures was between $1.3^{\circ}C$ and $5.2^{\circ}C$, and the change in precipitation ranged from - 42.4 mm (- 3.2%) and + 389.8 mm (+ 29.6%) for South Korea. The range of increased minimum temperatures was between $2.3^{\circ}C$ and $8.5^{\circ}C$ for East Asia countries and was between $2.1^{\circ}C$ and $7.4^{\circ}C$ for the Asian continent, and the change in precipitation ranged from 28.8 mm (+ 6.3%) and 156.8 mm (+ 34.3%) for East Asia countries and from 32.4 mm (+ 5.5%) and 126.2 mm (+ 21.3%) for the Asian continent. We suggest climate change studies in South Korea should not use a single GCM or only an ensemble climate model's output and we recommend to use GFDL-CM3 and INMCM4 GCMs to bracket projected change for use in other national climate change studies to represent the range of projected future climate conditions.

• Journal of Environmental Science International
• /
• v.21 no.12
• /
• pp.1477-1485
• /
• 2012

This study examined urbanization effects and the causes of urbanization, urban population growth, increase of the city scale, land cover change, and human cultures and economic activities, using the daily minimum temperatures of the past 50 years (1961-2010) with the subject of Busan and analyzed correlations between urbanization effects and the causes of urbanization. Thereby, this paper drew a conclusion as below: 1) Due to the urbanization effects, the average annual daily minimum temperature increased as about $1.2^{\circ}C$; however, except for the factor of urbanization, the increase was shown as about $0.2^{\circ}C$. The occupancy of urbanization effects in the total temperature increase was quite high as about 83%. 2) Just like other cities experiencing urbanization, Busan, too, sees population growth and the expansion of city area as well as increased urbanization effects. First of all, correlation between population growth and urbanization effect was high as 0.96 before 1985 while it was lowered as 0.19 after 1985. Also, correlation between the increase of city area and urbanization effect was high as 0.64 and 0.79 before and after 1985. 3) Regarding the correlation between long-term land use change and urbanization effect, urbanization effect was affected greatly by the increase of city area (0.97) and reduction of green area (0.92). 4) Concerning human activities possible to affect the climatic factors of a city, this paper found the following factors: road length, car increase, power use, and the consumer price index, etc. And regarding the correlation between the three factors and urbanization effect, the correlation was higher in the consumer price index (0.97), the number of registered cars (0.89), power use (0.75), and road length (0.58) in order.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.14 no.3
• /
• pp.188-202
• /
• 2011

Due to emissions of greenhouse gases caused by increased use of fossil fuels, the climate change has been detected and this phenomenon would affect even larger changes in temperature and precipitation of South Korea. Especially, the increase of temperature by climate change can affect the amount and pattern of snowfall. Accordingly, we tried to predict future snowfall and the snowfall pattern changes by using the downscaled GCM (general circulation model) scenarios. Causes of snow varies greatly, but the information provided by GCM are maximum / minimum temperature, rainfall, solar radiation. In this study, the possibility of snow was focused on correlation between minimum temperatures and future precipitation. First, we collected the newest fresh snow depth offered by KMA (Korea meteorological administration), then we estimate the temperature of snow falling conditions. These estimated temperature conditions were distributed spatially and regionally by IDW (Inverse Distance Weight) interpolation. Finally, the distributed temperature conditions (or boundaries) were applied to GCM, and the future snowfall was predicted. The results showed a wide range of variation for each scenario. Our models predict that snowfall will decrease in the study region. This may be caused by global warming. Temperature rise caused by global warming highlights the effectiveness of these mechanisms that concerned with the temporal and spatial changes in snow, and would affect the spring water resources.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.11
• /
• pp.683-692
• /
• 2020

A joint displacement resistance evaluation method for selecting waterproofing materials in railway bridge decks is proposed. The displacement range for an evaluation is determined by finite element method (FEM) analysis of a load case based on an existing high-speed PSC Girder Box railroad bridge structure. The FEM analysis results were used to calculate the minimum joint displacement range to be applied during testing (approximately 1.5 mm). For the evaluation, four commonly used waterproofing membrane types, cementitious slurry coating (CSC), polyurethane coating system (PCS), self-adhesive asphalt sheet (SAS), and composite asphalt sheet (CAS), were tested, with five specimens of each membrane type. The joint displacement width range conditions, including the minimum displacement range obtained from FEM analysis, were set to be the incrementing interval, from 1.5, 3.0, 4.5, and 6.0 mm. The proposal for the evaluation criteria and the specimen test results demonstrated how the evaluation method is important for the sustainability of high-speed railway bridges.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.6
• /
• pp.32-40
• /
• 2015

In this paper, the optimum antenna placement is analyzed by considering the interference between airborne antennas mounted on the unmanned aerial vehicle(UAV). The analysis is implemented by selecting the antennas that the distance and operational frequency band between airborne antennas is close to each other among the omni-directional antennas. The analyzed antennas are the control datalink, TCAS(Traffic Collision & Avoidance System), IFF(Identification Friend or Foe), GPS(Global Positioning System), and RALT(Radar ALTimeter) antennas. There are three steps for the optimum antenna placement analysis. The first step is selecting the antenna position having the optimum properties by monitoring the variation of radiation pattern and return loss by the fuselage of UAV after selecting the initial antenna position considering the antenna use, type, and radiation pattern. The second one is analyzing the interference strength between airborne antennas considering the coupling between airborne antennas, spurious of transmitting antenna, and minimum receiving level of receiving antenna. In case of generating the interference, the antenna position without interference is selected by analyzing the minimum separation distance without interference. The last one is confirming the measure to reject the frequency interference by the frequency separation analysis between airborne antennas in case that the intereference is not rejected by the additional distance separation between airborne antennas. This analysis procedure can be efficiently used to select the optimum antenna placement without interference by predicting the interference between airborne antennas in the development stage.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.36 no.6
• /
• pp.457-467
• /
• 2018

Currently, the regulation and rules for public surveying and the UCPs (Unified Control Points) adapts those of the triangulated traverse surveying. In addition, such regulations do not take account of the unique characteristics of GNSS (Global Navigation Satellite System) surveying, thus there are difficulties in field work and data processing afterwards. A detailed procesure of GNSS processing has not yet been described either, and the verification of accuracy does not follow the generic standards. In order to propose an appropriate procedure for field surveys, we processed a short session (30 minutes) based on the scenarios similar to actual situations. The reference network in Seoul was used to process the same data span for 3 days. The temporal variation during the day was evaluated as well. We analyzed the accuracy of the estimated coordinates depending on the parameterization of tropospheric delay, which was compared with the 24-hr static processing results. Estimating the tropospheric delay is advantageous for the accuracy and stability of the coordinates, resulting in about 5 mm and 10 mm of RMSE (Root Mean Squared Error) for horizontal and vertical components, respectively. Based on the test results, we propose a procedure to estimate the daily solution and then combine them to estimate the final solution by applying the minimum constraints (no-net-translation condition). It is necessary to develop a web-based processing system using a high-end softwares. Additionally, it is also required to standardize the ID of the public control points and the UCPs for the automatic GNSS processing.

• Journal of Pharmacopuncture
• /
• v.19 no.4
• /
• pp.312-318
• /
• 2016

Objectives: Bacterial resistant infections have become a global health challenge and threaten the society's health. Thus, an urgent need exists to find ways to combat resistant pathogens. One promising approach to overcoming bacterial resistance is the use of herbal products. Green tea catechins, the major green tea polyphenols, show antimicrobial activity against resistant pathogens. The present study aimed to investigate the effect of catechins, green tea extract, and methylxanthines in combination with gentamicin against standard and clinical isolates of Staphylococcus aureus (S. aureus) and the standard strain of Pseudomonas aeruginosa (P. aeruginosa). Methods: The minimum inhibitory concentration (MIC) and the minimum bactericidal concentration (MBC) values of different agents against bacterial strains were determined. The interactions of green tea extract, epigallate catechin, epigallocatechin gallate, two types of methylxanthine, caffeine, and theophylline with gentamicin were studied in vitro by using a checkerboard method and calculating the fraction inhibitory concentration index (FICI). Results: The MICs of gentamicin against bacterial strains were in the range of $0.312-320{\mu}g/mL$. The MIC values of both types of catechins were $62.5-250{\mu}g/mL$. Green tea extract showed insufficient antibacterial activity when used alone. Methylxanthines had no intrinsic inhibitory activity against any of the bacterial strains tested. When green tea extract and catechins were combined with gentamicin, the MIC values of gentamicin against the standard strains and a clinical isolate were reduced, and synergistic activities were observed (FICI < 1). A combination of caffeine with gentamicin did not alter the MIC values of gentamicin. Conclusion: The results of the present study revealed that green tea extract and catechins potentiated the antimicrobial action of gentamicin against some clinical isolates of S. aureus and standard P. aeruginosa strains. Therefore, combinations of gentamicin with these natural compounds might be a promising approach to combat microbial resistance.