• 제목/요약/키워드: global management

Search Result 4,450, Processing Time 0.03 seconds

Future Korean Water Resources Projection Considering Uncertainty of GCMs and Hydrological Models (GCM과 수문모형의 불확실성을 고려한 기후변화에 따른 한반도 미래 수자원 전망)

  • Bae, Deg-Hyo;Jung, Il-Won;Lee, Byung-Ju;Lee, Moon-Hwan
    • Journal of Korea Water Resources Association
    • /
    • v.44 no.5
    • /
    • pp.389-406
    • /
    • 2011
  • The objective of this study is to examine the climate change impact assessment on Korean water resources considering the uncertainties of Global Climate Models (GCMs) and hydrological models. The 3 different emission scenarios (A2, A1B, B1) and 13 GCMs' results are used to consider the uncertainties of the emission scenario and GCM, while PRMS, SWAT, and SLURP models are employed to consider the effects of hydrological model structures and potential evapotranspiration (PET) computation methods. The 312 ensemble results are provided to 109 mid-size sub-basins over South Korean and Gaussian kernel density functions obtained from their ensemble results are suggested with the ensemble mean and their variabilities of the results. It shows that the summer and winter runoffs are expected to be increased and spring runoff to be decreased for the future 3 periods relative to past 30-year reference period. It also provides that annual average runoff increased over all sub-basins, but the increases in the northern basins including Han River basin are greater than those in the southern basins. Due to the reason that the increase in annual average runoff is mainly caused by the increase in summer runoff and consequently the seasonal runoff variations according to climate change would be severe, the climate change impact on Korean water resources could intensify the difficulties to water resources conservation and management. On the other hand, as regards to the uncertainties, the highest and lowest ones are in winter and summer seasons, respectively.

Analysis on Recent Changes in the Covered Interest Rate Parity Condition (글로벌 금융위기 전후 무위험 이자율 평형조건의 동태성 변화 분석)

  • Kim, Jung Sung;Kang, Kyu Ho
    • KDI Journal of Economic Policy
    • /
    • v.36 no.2
    • /
    • pp.103-136
    • /
    • 2014
  • The covered interest rate parity condition (CIRP) has been widely used in open macroeconomic analysis, risk management, exchange rate forecasts, and so forth. Due to the recent global financial crises, there have been remarkable changes in the financial markets of the emerging markets. These changes possibly influenced the dynamics of the covered interest rate parity condition. In this paper, we investigate whether the CIRP dynamics has changed, and what is the nature of the regime changes. To do this, we propose and estimate multiple-state Markov regime switching models using a Bayesian MCMC method. Our estimation results indicate that the default risk or the deviation from the CIRP has been decreased after the crisis. It seems to be associated with the more active interaction between the short-term bond market and the short-term foreign exchange market than before. The tightened relation of these two financial markets is caused by the arbitrage transaction of foreign investors.

  • PDF

Analysis of trunk angle and muscle activation during chest compression in 119 EMTs (가슴압박시 구급대원의 체간 각도와 근활성도 분석)

  • Shin, Dong-Min;Lee, Chang-Sub;Kim, Seung-Yong;Kim, Chang-Kook;Hong, Eun-Jeong;Lee, Young-Chul;Choi, Ga-Ram;Kim, Gyoung-Yong;Jang, Mun-Sun;Kim, Jeong-Hee;Han, Boong-Ki;Lee, Jong-Kun;Tak, Yang-Ju
    • The Korean Journal of Emergency Medical Services
    • /
    • v.18 no.3
    • /
    • pp.7-18
    • /
    • 2014
  • Purpose: We aimed to investigate trunk angle and muscle activation of the extremity and back to evaluate the effect of chest compression on work-related musculoskeletal disorders in 119 emergency medical technicians (EMTs). Methods: Eighteen 119 EMTs performed 2-minute chest compression without interruption on a cardiopulmonary resuscitation manikin, during which we measured changes in the trunk and shoulder joint angles, muscle activation (triceps brachii, biceps brachii, erector spinae, gluteus maximus, pectoralis major, rectus abdominis, and rectus femoris) and chest compression accuracy. Results: The decrease in trunk angle by trunk muscle activation was the highest in event 2, the major direction of chest compression. Both shoulder joint angles had no significant difference. Muscle activation of the triceps brachii (p < .01), biceps brachii (p < .05), rectus abdominis (p < .05) and rectus femoris (p < .01) significantly increased during the compression phase compared with the decompression phase, with the rectus femoris showing an increase of 19%. Muscle activation of the erector spinae significantly increased in the decompression phase compared with the compression phase (p < .01). Conclusion: 119 EMTs mainly use the triceps brachii, biceps brachii and pectoralis major muscles during chest compression.

Study on low-level laser therapy device according to the obesity development (비만치료기 개발에 따른 저준위레이저에 관한 연구)

  • Lee, Sang-sik;Kim, Jun-tae;Jeong, Jin-hyoung;Kim, Nam-Sun
    • The Journal of Korea Institute of Information, Electronics, and Communication Technology
    • /
    • v.9 no.1
    • /
    • pp.82-89
    • /
    • 2016
  • And by entering into an aging society with economic growth "beautiful and healthy desire to live', aesthetics industry as promote interest in 'Anti-aging' is emerging as a promising business increased significantly the skin care market. However, the management of the hospital or the temporal order to receive professional care providers, spatial, and cost constraints caused many companies to solve this problem began to approach the Home Care Area. Global trends in personal skin care market has been activated, the domestic has been activated at low cost, private market due to the recession. We have performed this test in order to develop a skin care device for home in order to compensate for this point.In this paper, we develop a low-level laser to create a personal skin care products and sought to incorporate them into the skin cosmetic.Expand the pores by using the low-level laser to the skin by to the dermal layer of the skin was penetrated aim experiment the ampoule, and by a comparison of the medical low-level laser reliability and determine the effectiveness or absence of the performance and efforts to commercialize.

A Study on the Analysis of Energy Voucher Effects Using Micro-household Data (가구부문 미시자료를 활용한 에너지바우처 효과 추정에 관한 연구)

  • Lee, Eun Sol;Park, Kwang Soo;Lee, Yoon;Yoon, Tae Yeon
    • Environmental and Resource Economics Review
    • /
    • v.28 no.4
    • /
    • pp.527-556
    • /
    • 2019
  • In Korea, nearly 100 billion won is spent annually under the name of energy voucher on 600,000 households for the last five years, and this is a unique case and hard to monitor worldwide. Therefore, no studies have been conducted to assess impacts of the energy voucher on energy consumption and cost burden alleviation for beneficiaries. This paper aims to demonstrate the effectiveness of energy vouchers in terms of energy expense. The propensity score matching was conducted on samples of low-income households based on the Korea Welfare Panel. Then, simple Difference-In-Differences and Fixed-Effect Difference-In-Differences models were applied to estimate the effect of energy vouchers. In results, the beneficiaries of energy vouchers would spend an additional 4,371~4,870 won per month on energy consumption. The ratio is equivalent to 51.9~57.7 percent of the aid, which is also the highest when compared with 23~56 percent of U.S. Food Stamp. In terms of energy welfare, voucher payment could become one of the best management practices. However, identifying the blind spots as non-reciprocal households and expanding the differential support mechanism that reflects the energy consumption environment should be solved in the future.

Fluoride Removal from Aqueous Solution Using Thermally Treated Pyrophyllite as Adsorbent (고온 처리된 납석을 흡착제로 이용한 용액상의 불소 제거)

  • Kim, Jae-Hyun;Song, Yang-Min;Kim, Song-Bae
    • Journal of Korean Society of Environmental Engineers
    • /
    • v.35 no.2
    • /
    • pp.131-136
    • /
    • 2013
  • The aim of this study was to investigate the removal of fluoride using thermally treated pyrophyllite as adsorbent. Sorption experiments were conducted under batch conditions to examine the effects of adsorbent dose, reaction time, initial fluoride concentration and solution pH on fluoride removal. In the experiments, the pyrophyllite thermally treated at different temperatures [untreated (P-U), $400^{\circ}C$ (P-400), $600^{\circ}C$ (P-600)] were used. Results showed that the adsorption capacity was in the order of P-400 > P-U > P-600. The XRD analysis indicated that both P-U and P-400 were composed of quartz, dickite and pyrophyllite while P-600 was quartz. The BET analysis showed that the specific surface area was in the order of P-600 > P-400 > P-U. Kinetic data showed that fluoride sorption to P-400 arrived at equilibrium around 24 h. Equilibrium test demonstrated that the maximum sorption capacity of P-400 was 0.957 mg/g. In addition, fluoride removal by P-400 was not sensitive to solution pH between 4 and 10. However, fluoride removal decreased considerably at highly acidic (pH < 4) and alkaline (pH > 10) conditions. This study demonstrates that pyrophyllite could be used as a low-cost adsorbent for fluoride removal from aqueous solution.

Damage Analysis of Meteorological Disasters for Each District Considering the Characteristics of a District (지자체별 특성을 고려한 자연재해에 따른 피해유형 분석)

  • Jun, Hwan-Don;Park, Moo-Jong;Kim, Guen-Young
    • Journal of the Korean Society of Hazard Mitigation
    • /
    • v.8 no.2
    • /
    • pp.75-82
    • /
    • 2008
  • Heavy rains and typhoons are the most critical meteorological disaster occurred in the Korean peninsular. Due to the global warming, the magnitude of heavy rains and typhoons is becoming heavier resulting in more damage annually. Therefore, it is required to establish a mitigation plan to reduce the damage from meteorological disasters. To do so, in general, it is better to establish a mitigation plan for each district considering the characteristics of a district than a single mitigation plan for the entire districts without considering the characteristics of an individual district. In this study, we provide fundamental data for establishing a mitigation plan from analysis considering the frequency and damage in monetary value by heavy rain and typhoon with the geological and social characteristics of districts. The annual damage reports published by the National Emergency Management Agency, dated from 1994 to 2003, are used for the analysis. The districts are classified into six categories by the geological and social characteristics. Also, the frequency and damage in monetary value are assessed for each district. Based on them, the damage degree by heavy rain and typhoon from 1st to 4th is assigned to each district. The assigned damage degree is, then, analyzed with geological and social characteristics of each district to show the status of damage by meteorological disasters on the district.

A Study on the Utilization of Enterprise Architecture to Attract Reshoring Manufactures into Port Logistics Park (리쇼어링 제조기업의 항만배후단지 유치를 위한 정보기술아키텍쳐 활용에 관한 연구)

  • Lee, Eon-Kyung;Kim, Jumi
    • Journal of Information Technology and Architecture
    • /
    • v.11 no.2
    • /
    • pp.217-223
    • /
    • 2014
  • This paper aims to explain the reasons of manufacturing's reshoring (U-turn) and to suggest the supporting law and policy and the utilization of enterprise architecture (EA) in order to attract reshoring manufacturers into port logistics park. First, this paper found the reasons of reshoring reviewing the previous researches. The reasons are 1) advanced country's manufacturing competitiveness in total production cost compared to the emerging countries such as China, 2) the government policies enhancing the reshoring of their enterprise, and 3) the deterioration of management environment of foreign companies in the emerging countries. Second, this paper reviewed the supporting law and policy of korean government for reshoring manufacurers, and suggested the method to attract them into port logistics park. The current law to support the reshoring manufacturers does not have articles about moving into the port logistics park in order to help global trade from outsourcing countries. Finally, this paper provided the method of utilization of enterprise architecture to help reshoring decision making to get their benefit for the future and collaboration among related government departments with the ministry of maritime affairs and fisheries.

(Design and Implementation of Integrated Binding Service of Considering Loads in Wide-Area Object Computing Environments) (광역 객체 컴퓨팅 환경에서 부하를 고려한 통합 바인딩 서비스의 설계 및 구현)

  • 정창원;오성권;주수종
    • Journal of KIISE:Information Networking
    • /
    • v.30 no.3
    • /
    • pp.293-306
    • /
    • 2003
  • In recent years, distributed computing environments have been radically changing to a structure of global, heterogeneous, federative and wide-area systems. This structure's environments consist of a let of objects which are implemented on telecommunication network to provide a wide range of services. Furthermore, all of objects existing on the earth have the duplicated characteristics according to how to categorize their own names or properties. But, the existing naming or trading mechanism has not supported the binding services of duplicated objects, because of deficiency of independent location service. Also, if the duplicated objects which is existing on different nodes provide the same service, it is possible to distribute the client requests considering each system's load. For this reason, we designed and implemented a new model that can not only support the location management of replication objects, but also provide the dynamic binding service of objects located in a system with minimum overload for maintaining load balancing among nodes in wide-area object computing environments. Our model is functionally divided into two parts; one part is to obtain an unique object handle of replicated objects with same property as a naming and trading service, and the other is to search one or more contact addresses by a location service using a given object handle. From a given model mentioned above, we present the procedures for the integrated binding mechanism in design phase, that is, Naming/Trading Service and Location Service. And then, we described in details the architecture of components for Integrated Binding Service implemented. Finally, we showed our implement environment and executing result of our model.

Advancement Plan on Hazardous Material Classification and Comparative Study of the Criteria in UN GHS and Safety Control of Dangerous Substances Act (UN GHS와 위험물안전관리법상의 위험물질 분류기준 비교 및 선진화 방안 연구)

  • Lee, Bong Woo;Lee, Kijun;Park, Jeongpil;Shin, Dongil
    • Journal of the Korean Institute of Gas
    • /
    • v.17 no.5
    • /
    • pp.42-50
    • /
    • 2013
  • With the rapid change of industry and the development of science and technology, more than 100,000 industrial chemicals are being used and 2,000 new materials are developed every year. Chemical products have had favorable influence on our daily life and contributed very much to the prosper of human culture. But some materials are inherently poisonous and dangerous. Korea ranks as the number 7 in world's chemical products market and the chemical sector is contributing to the economic revival through importing and exporting of the products. With the increasing domestic as well as international interests about REACH and GHS, the need for the effective and efficient chemical material management system is getting bigger and bigger. In this research, we compare the criteria in UN GHS and Safety Control of Dangerous Substances Act of Korea for the development of global standard test methods and the classification and labelling for the chemicals, and suggest an advancement plan for the introduction of the GHS in a building block approach. In addition, providing the harmonized information about chemical hazards is suggested for the elimination of international trade barriers for chemical industries.