• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.2B
• /
• pp.193-205
• /
• 2009

Typhoons occurred in the tropical Pacific region, these might be affected the Korea moving toward north. The strong winds and the heavy rains by the typhoons caused a natural disaster in Korea. In the research, the heavy rainfall events based on typhoons were evaluated quantitative through various statistical techniques. First, probability precipitation and typhoon probability precipitation were compared using frequency analysis. Second, EST probability precipitation was calculated by Empirical Simulation Techniques (EST). Third, NL probability precipitation was estimated by coupled Nonparametric monte carlo simulation and Locally weighted polynomial regression. At the analysis results, the typhoons can be effected Gangneung and Mokpo stations more than other stations. Conversely, the typhoons can be effected Seoul and Inchen stations less than other stations. Also, EST and NL probability precipitation were estimated by the long-term simulation using observed data. Consequently, major hydrologic structures and regions where received the big typhoons impact should be review necessary. Also, EST and NL techniques can be used for climate change by the global warming. Because, these techniques used the relationship between the heavy rainfall events and the typhoons characteristics.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.121-121
• /
• 2022

한국과 미국은 2018년 8월에 발표한 메콩우호국(Friends of the Lower Mekong, FLM) "메콩지역 수자원 데이터 관리 및 정보공유 강화에 관한 공동성명"을 계기로 메콩유역의 실시간 수자원 변동 모니터링 및 분석과 수자원 데이터 공동활용 역량을 강화하여 효율적이고 과학적인 수자원관리 지원과 함께 한국의 신남방정책과 미국의 인도-태평양 전략 시너지효과를 극대화하고자 메콩 주변국 재해경감 및 수자원 데이터 활용 역량강화를 위한 글로벌 위성기반 수문자료의 생산·활용 및 홍수·가뭄 등의 수재해 분석기술을 개발하고 있다. 여기에는 한국 K-water의 물관리 기술과 미국 NASA, USACE의 위성활용 및 수자원분석 기술을 접목하여 메콩지역의 체계적인 물관리 및 재해로부터 안전성 확보 기여에 목표를 두고 연구를 진행 중에 있다. 본 연구에서는 전 세계적으로 광범위하게 활용되고 있는 미공병단(USACE, U.S. Army Corps of Engineers)의 HEC software 프로그램을 메콩 시범지역(pilot area)에 적용하여 수리/수문모델 구축을 진행하고 있다. 구축되는 모형은 유역 상류 댐의 연계 모의운영 및 하류 홍수분석이 동시 가능한 HEC-RTS(Real-Time Simulation)로 이는 HEC-HMS, -ResSim, -RAS와 -FIA 모형이 순차적으로 결합된 수리/수문 모델링 시스템이다. 모형의 시범적용 지역은 현지 메콩위원회(MRC, Mekong River Comission)의 의견 등을 반영, 메콩강 하류지역(Lower Mekong) 본류 유역에 위성자료 활용 및 준실시간(near real-time)으로 댐 모의운영 등을 고려할 수 있는 JingHong댐(중국 란창강 최하류)에서 라오스 Xayaburi댐(메콩강 최상류)까지의 구간을 선정하였으며, 전년도에는HEC-RTS 중 HMS(Hydrologic Modeling System) 모형 적용을 중심으로 가용한 위성자료(GPM IMERG)를 활용하여 과거 홍수사상에 대한 모의를 고려한 강우-유출모형의 구축을 완료하였다. 이에 연속하여 금년도에는 동일유역 내 하천 단면 등이 확보된 Chiang Saen 지점에서 Xayaburi 댐까지의 구간에 대해 RAS(River Analysis System)을 구축할 예정으로 구축된 RAS 모형은 HEC-RTS에 포함되어 메콩 시범지역의 종합적 수리/수문분석에 적용될 예정이다.

• Asia Marketing Journal
• /
• v.15 no.3
• /
• pp.79-95
• /
• 2013

New product innovation is a process of embodying new knowledge in a product and technology licensing is getting popular as a means to innovations and introduction of new product to the market in today's competitive global market environment. Incumbents often rely on technology licensing to access new product opportunities created by other firms. Prior research has examined various aspects of technology licensing agreements such as specific contract terms of licensing agreements, e.g., distribution of control rights, exclusivity of licensing agreements, cross-licensing, and the scope of licensing agreements. This study aims to provide answers to an important, but under-researched question: why do some incumbents initiate more licensing agreement for exploratory learning while others do it for exploitative learning along the innovation process? We attempt to extend our knowledge of licensing agreements from an organizational learning perspective. Technology licensing as a specific form of interfirm linkages can be initiated with different learning objectives along the process of new product innovation. The exploratory stages of the innovation process such as discovery or research stages involve extensive searches to create new knowledge or capabilities, whereas the exploitative stages of the innovation process such as application or test stages near the commercialization are more focused on developing specific applications or improving their efficiency or reliability. Thus, different stages of the innovation process generate different types of learning and the resulting technological resources. We examine when incumbents as licensees initiate more licensing agreements for exploratory learning objectives and when more for exploitative learning objectives, focusing on two factors that may influence a firm's formation of exploratory and exploitative licensing agreements: 1) its past radical and incremental innovation experience and 2) its internal investments in R&D and marketing. We develop and test our hypotheses regarding the relationship between a firm's radical and incremental new product experience, R&D investment intensity and marketing investment intensity, and the likelihood of engaging in exploratory and exploitive licensing agreements. Using data collected from various secondary sources (Recap database, Compustat database, and FDA website), we analyzed technology licensing agreements initiated in the biotechnology and pharmaceutical industries from 1988 to 2011. The results of this study show that incumbents initiate exploratory rather than exploitative licensing agreements when they have more radical innovation experience and when they invest in R&D activities more intensively; in contrast, they initiate exploitative rather than exploratory licensing agreements when they have more incremental innovation experience and when they invest in marketing activities more intensively. The findings of this study contribute to the licensing and interfirm cooperation studies. First, this study lays a foundation to understand the organizational learning aspect of technology licensing agreements. Second, this study sheds lights on how a firm's internal investments in R&D and marketing are linked to its tendency to initiate licensing agreements along the innovation process. Finally, the findings of this study provide important insight to managers regarding which technologies to gain via licensing agreements. This study suggests that firms need to consider their internal investments in R&D and marketing as well as their past innovation experiences when they initiate licensing agreements along the process of new product innovation.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2023.05a
• /
• pp.110-111
• /
• 2023

As carbon neutrality has recently emerged as a global issue, the carbon neutral roadmap of MOF has been established and various strategies have been proposed to achieve carbon neutrality in the entire marine industry. The port sector is also included in the target for greenhouse gas reduction, but emissions are not being measured due to limitations in data collection and no inventory construction. For building a carbon-neutral port, it is essential to calculate and forecast emissions and set reduction targets. Accordingly, in this study, CO₂ emitted from domestic port equipment was calculated according to the IPCC Guildeline's emission calculation method, and future emission was estimated. As a result of the analysis, about 420,000 tons of CO₂ was emitted based on the cargo volume in 2020, and emissions are expected to continue to increase in proportion to the increase and about 720,000 tons will be emitted by 2050. In order to achieve carbon neutrality of the port, it needs to promote emission reduction by converting the power source for oil-based equipment to eco-friendly fuel. Also container and miscellaneous ports which require complicated cargo handling need to effort to reduce CO₂.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.207-207
• /
• 2022

Eating and cooking quality (ECQ) is one of the most complex quantitative traits in rice. The understanding of genetic regulation of transcript expression levels attributing to phenotypic variation in ECQ traits is limited. We integrated whole-genome resequencing, transcriptome, and phenotypic variation data from 84 Japonica accessions to build a transcriptome-wide association study (TWAS) based regulatory network. All ECQ traits showed a large phenotypic variation and significant phenotypic correlations among the traits. TWAS analysis identified a total of 285 transcripts significantly associated with six ECQ traits. Genome-wide mapping of ECQ-associated transcripts revealed 66,905 quantitative expression traits (eQTLs), including 21,747 local eQTLs, and 45,158 trans-eQTLs, regulating the expression of 43 genes. The starch synthesis-related genes (SSRGs), starch synthase IV-1 (SSIV-1), starch branching enzyme 1 (SBE1), granule-bound starch synthase 2 (GBSS2), and ADP-glucose pyrophosphorylase small subunit 2a (OsAGPS2a) were found to have eQTLs regulating the expression of ECQ associated transcripts. Further, in co-expression analysis, 130 genes produced at least one network with 22 master regulators. In addition, we developed CRISPR/Cas9-edited glbl mutant lines that confirmed the role of alpha-globulin (glbl) in starch synthesis to validate the co-expression analysis. This study provided novel insights into the genetic regulation of ECQ traits, and transcripts associated with these traits were discovered that could be used in further rice breeding.

• Journal of Practical Engineering Education
• /
• v.14 no.3
• /
• pp.601-608
• /
• 2022

This study examines the current status of smart manufacturing innovation policies in Germany and Korea, compares and analyzes the supply industry strategies of both countries, and suggests the direction for Korea's smart manufacturing innovation supply industry. Germany's supply industry strategy aims to strengthen the market dominance of domestic suppliers through high technology, compatibility, and high reliability based on reference for global demanding companies. On the other hand, the Korea's supply industry strategy remains at the level improvement of the demanding companies by stage, so it is time to take a long-term and consistent response with the goal of implementing smartization at the advanced level. By referring to Germany's supply industry strategy for the advancement of smart factories, it was intended to help in establishing government support policies and supplier strategies. In addition, based on the analysis results of the supply industry strategies of both countries, improvement measures for the advancement of Korea's smart factories were presented. Ultimately, the contents of this study can be used as basic data for policy establishment to strengthen the industrial competitiveness of Korea's small and medium-sized suppliers.

• Informatization Policy
• /
• v.30 no.4
• /
• pp.40-61
• /
• 2023

The adoption of smart factories and smart manufacturing as strategies to enhance competitiveness and stimulate growth in the manufacturing sector is vital for a country's future competitiveness and industrial transformation. The government has consistently pursued smart manufacturing innovation policies starting with the Manufacturing Innovation 3.0 strategy in the Ministry of Industry. This study aims to identify policy areas for smart factories and smart manufacturing based on technical standards. Analyzing policy areas at the current stage where the establishment and support of domestic standards aligning with international technical standards are required is crucial. By prioritizing smart manufacturing process areas within the industry, policymakers can make well-informed decisions to advance smart manufacturing without blindly following international standardization in already well-established areas. To achieve this, the study utilizes a hierarchical analysis method including expert interviews and importance-performance analysis for the five major process areas. The findings underscore the importance of proactive participation in standardization for emerging technologies, such as data and security, instead of solely focusing on areas with extensive international standardization. Additionally, policymakers need to consider carbon emissions, energy costs, and global environmental challenges to address international trends in export and digital trade effectively.

• Korean journal of applied entomology
• /
• v.62 no.3
• /
• pp.215-220
• /
• 2023

A recent discovery of drywood termites (Cryptotermes domesticus) in a residential facility in Seoul has raised significant concern. This exotic insect species, which can damage timber and wooden buildings, necessitates an immediate investigation of potential infestation. In this study, we assessed the climatic suitability for this termite species using a species distribution modeling approach. Global distribution data and bioclimatic variables were compiled from published sources, and predictive models for climatic suitability were developed using four modeling algorithms. An ensemble prediction was made based on the mean occurrence probability derived from the individual models. The final model suggested that this species could potentially establish itself in tropical coastal regions. While the climatic suitability in South Korea was generally found to be low, a careful investigation is still warranted due to the potential risk of colonization and establishment of this species.

• Korean Journal of Remote Sensing
• /
• v.39 no.5_1
• /
• pp.495-505
• /
• 2023

The Musan mine, situated in Musan County, Hamgyong Province, North Korea, stands as a prominent open-pit iron mine on the Korean Peninsula. This study focuses on estimating the mining and dumping activities within the Musan mine area by analyzing digital elevation model (DEM) changes. To calculate the long-term volume changes in the Musan mine, we digitized and converted the 1:200,000-scale third topographic map of the Joseon published in 1918 and compared with interferometric synthetic aperture radar (InSAR) DEMs, including Shuttle Radar Topography Mission DEM (2000) and Copernicus DEM (2011-2015). The findings reveal that over a century, Musan mine yielded around 1.37 billion tons of iron ore, while approximately 1.06 billion tons of waste rock were dumped. This study is particularly significant as it utilizes a historical topographic map predating the full-scale development of Musan mine to estimate a century's mining production and waste rock deposition. It is expected that this research provides valuable insights for future investigation of surface change of North Korea where the acquisition of in situ data remains challenging.

• Journal of Internet Computing and Services
• /
• v.24 no.6
• /
• pp.137-144
• /
• 2023

Cyberattack technology is evolving to an unpredictable degree, and it is a situation that can happen 'at any time' rather than 'someday'. Infrastructure that is becoming hyper-connected and global due to cloud computing and the Internet of Things is an environment where cyberattacks can be more damaging than ever, and cyberattacks are still ongoing. Even if damage occurs due to external influences such as cyberattacks or natural disasters, intelligent self-recovery must evolve from a cyber resilience perspective to minimize downtime of cyber assets (OS, WEB, WAS, DB). In this paper, we propose an intelligent self-recovery technology to ensure sustainable cyber resilience when cyber assets fail to function properly due to a cyberattack. The original and updated history of cyber assets is managed in real-time using timeslot design and snapshot backup technology. It is necessary to secure technology that can automatically detect damage situations in conjunction with a commercialized file integrity monitoring program and minimize downtime of cyber assets by analyzing the correlation of backup data to damaged files on an intelligent basis to self-recover to an optimal state. In the future, we plan to research a pilot system that applies the unique functions of self-recovery technology and an operating model that can learn and analyze self-recovery strategies appropriate for cyber assets in damaged states.