• 한국운동역학회지
• /
• 제26권4호
• /
• pp.333-341
• /
• 2016

Objective: The purpose of this study was to assess the consistency of the gliding and push-off motion for single leg skating from the first to fourteenth steps. We hypothesized that: 1) there would be no difference in stroke trajectory, step rate, and cycle rate between the left and right steps of gliding; and 2) there would be a difference in the resultant velocity of toe push-off and the horizontal velocity of the center of mass after six step push-offs. Method: The study included five male 500-m speed skaters (mean height, $1.80{\pm}0.02m$; mean weight, $76.8{\pm}3.96kg$; record, $35.83{\pm}0.30sec$; 100-m record, <9.97 sec). Data were collected from the first to fourteenth steps (40 m) and recorded using five digital JVC GR-HD1KR video cameras (Victor Co., Japan) operating at a sampling frequency of 60 fields/sec and shutter speed of 1/500 sec. For each film frame, the joint positions were digitized using the KWON3D motion analyzer. Position data were filtered with low-pass Butterworth $4^{th}$ order at the cut-off frequency of 7.4 Hz. Results: The right toe of the skating trajectories at $2^{nd}$, $5^{th}$, and $7^{th}$ strokes differed from those of the left toe. The angles of the right and left knee demonstrated unbalanced patterns from the flexion and extension legs. The step and cycle rates of the right and left leg differed from the start until 20 m. The resultant velocities of the toe at the push-off phase and of the body mass center diverged before the six push-offs. Conclusion: This study's findings indicate that the toe of skating trajectory on left and right sliding after push-off should maintain a symmetrical trajectory. The resultant velocity of toe push-off and horizontal velocity from the center of body need to be separated after about six step push-offs.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 춘계학술대회논문집
• /
• pp.97-100
• /
• 2008

Various flyers in nature have attracted great interests with a recent need for developing versatile and small-size flight vehicles. In the present study, we focus on the flying fish which has been observed to glide a long distance just above a seawater surface. Since previous studies have depended on the field observation or measurement of the physical parameters only, quantitative data of the flying fish flight has not been provided so far. Therefore, we evaluate the wing performance of the flying fish in gliding flight by directly measuring the lift, drag and pitching moment on real flying fish models (Cypselurus hiraii) in a wind tunnel. In addition, we investigate the roles of wing morphology like the enlarged pectoral and pelvic fins, and lateral dihedral angle of pectoral fins. With both the pectoral and pelvic fins spread, the lift-to-drag ratio is larger and the longitudinal static stability is enhanced than those with the pelvic fins folded. From the glide polar, we find that the wing performance of flying fish is equivalent to those of medium-size birds like the petrel, hawk and wood duck. Finally, we examine the effect of water surface underneath the flying fish and find that the water surface reduces the drag and increases the lift-to-drag ratio.

• 대한후두음성언어의학회지
• /
• 제32권2호
• /
• pp.81-86
• /
• 2021

Background and Objectives Therapies have been reported to treat the glottal gap previously. However, these voice therapies showed the limits because many techniques focused only on one among breathing, resonance and phonation. In addition patients often have difficulties visiting hospital frequently. 'Gliding and humming' is vocal training technique that readjusts total vocal patterns such as breathing, resonance and phonation. This technique can be easily applied during short term sessions. The purpose of this study is to evaluate the efficiency of voice therapy with 'gliding and humming' for patients with glottic gap during short-term treatment sessions. Materials and Method Twenty-three patients with glottal gap were selected. Of all patients, 14 patients had sulcus vocalis and 12 patients had muscle tension dysphonia (MTD). Voice therapies were performed 1.9 sessions in average. GRBAS, jitter, shimmer, noise to harmonic ratio, semitone range, closed quotient_vowel and maximum phonation time were compared before and after the therapies. In addition, changes of glottal gap and MTD severity were evaluated. Results Statistically significant improvement was observed. MTD improvement was observed only among the patients with glottal gap improvement. Also sulcus vocalis group showed the statistically significant improvement. Conclusion 'Gliding and humming' was effective to the patients with glottic gap and sulcus vocalis. Also, among patients who have both glottic gap and MTD, the data suggests that voice therapy for glottic gap also makes improvement in MTD.

• 설비공학논문집
• /
• 제18권1호
• /
• pp.47-54
• /
• 2006

[ $CO_2$ ] and propane mixtures were chosen as promising alternative refrigerants and their performance potentials were evaluated experimentally in an air-conditioning system. Pure $CO_2$ and 85/15, 75/25 and 60/40 binary blends by the charged mass percentage of $CO_2/propane$ were selected as working fluids. The effect of the inlet temperature of the secondary fluids and degree of superheat on the cooling performance was tested and discussed. The charging amounts of refrigerants were adjusted to make the system show the maximum COP. Comparisons among different refrigerants were carried out on the same compressor speed basis for a given operating condition. In addition, the temperature gliding effect of zeotropic mixtures on the system performance were analyzed based on the drop-in test results.

• International Journal of Aeronautical and Space Sciences
• /
• 제13권3호
• /
• pp.267-281
• /
• 2012

This paper reviews the flight mechanics and control of birds and bird-size aircraft. It is intended to fill a niche in the current survey literature which focuses primarily on the aerodynamics, flight dynamics and control of insect scale flight. We review the flight mechanics from first principles and summarize some recent results on the stability and control of birds and bird-scale aircraft. Birds spend a considerable portion of their flight in the gliding (i.e., non-flapping) phase. Therefore, we also review the stability and control of gliding flight, and particularly those aspects which are derived from the unique control features of birds.

• 한국해양공학회지
• /
• 제28권6호
• /
• pp.560-565
• /
• 2014

In this study, the problem of trajectory optimization for underwater gliders considering depth constraints is discussed. Typically, underwater gliders are controlled to dive and climb in a saw-tooth pattern at constant gliding angles. This approach is effective and close to optimal for deep water applications. However, the optimal path deviates from the saw-tooth path in shallow water conditions. This study focuses on finding more efficient gliding paths that can minimize the traverse time in the horizontal plane when the water depth is limited. The trajectory optimization problem is formulated into a minimum time control problem with inequality path constraints and hydrodynamic drag effects. A numerical approach based on the pseudo-spectral method is adopted as a solution approach, and the simulation results are presented.

• 대한물리치료과학회지
• /
• 제2권2호
• /
• pp.545-562
• /
• 1995

The purpose of this paper was to provide the understanding of theory, technique, clinical use about arthro kinematic approach. Difference between AKA and Joint mobilization was seen through Table 1, and the relation between AKA and Athro kinematics was seen through Table 2. Examples of AKA techniques were as follow ; 1. Cervical intervertebral joint, left $C_{2/3}$ 2. Thoracic intervertebral joint, left $T_{5/6}$ 3. Sacroiliac joint, left (1) Nutation-upward gliding (2) Nutation-downward gliding (3) Superior distraction (4) Inferior distraction 4. 1st. costovertebral joint, left 5. 2nd. sternocostal joint, left 6. AKA-streching exercise 7. AKA - resistive exercise Symptoms, diagnosis, treatment were discribed for clinical use, and they were expected further that clinical application of AKA might clarify many of joint dysfunction.

• 대한물리치료과학회지
• /
• 제1권1호
• /
• pp.195-202
• /
• 1994

The following are suggested joint distraction and gliding techniques for use by entry level therapists and those attempting to gain a foundation in joint mobilization. A variety of adaptations can be made from these techniques. The distraction and glide techniques should be applied with respect to the dosage, frequency, progression, precautions, and procedures as described in this section. Basic concepts of joint mobilization were presented, including definitions of terminology and the two grading systems. Joint mobilization techniques are one part of a total treatment for decreased function. Therapy should also include appropriate range of motion, strengthening, and functional techniques.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.I
• /
• pp.764-767
• /
• 2005

Photoaligning polymers usually possess "sofe" surface, containing flexible groups and provide relatively small anchoring energy($W<10^{-2}$ erg $cm^{-2}$). In this case field-induced reorientation of director on the aligning surface is essential. We have shown that surface director reorientation can modify the aligning surface and result in gliding of the axis of easy orientation of LC. this phenomena together with adsorption/desorption of ions in electric field cause strong sticking effect in LCDs photoaligning materials. We proposed a method of decreasing of the sticking effect based on irradiation of the photoaligning surface by an unpolarized light.

• Journal of Magnetics
• /
• 제15권1호
• /
• pp.32-35
• /
• 2010

The effects of Cu-addition and die-upset temperature on the texture in the die-upset Nd-lean $Nd_xFe_{93.5-(x+y)}-Cu_yGa_{0.5}B_6$ (x = 9-12, y = 0-2) alloys were investigated. The die-upset Cu-containing Nd-lean $Nd_{12}Fe_{81.5-y}-Cu_yGa_{0.5}B_6$ (y = 1, 2) alloys showed a considerable texture. Texture in the Nd-lean alloys developed through basal plane slip deformation. The Cu-addition reduced the melting point of grain boundary phase facilitating grain gliding during the die-upsetting, and providing a greater chance for the $Nd_2Fe_{14}B$ grains to meet the deformation conditions. Die-upsetting at higher temperature facilitated grain gliding and plastic deformation, thus enhancing texture.