• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.27 no.9
• /
• pp.463-467
• /
• 2015

The air-bubble sheet has been widely used to wrap fragile products for long-distance transportation. The further usage of the air-bubble sheet as a thermal-insulation material for the reduction of the thermal conductivities of window systems has occurred because of its low price, in addition to its thermal-conductivity properties. In this study, the thermal performances of a variety of commercial air-bubble sheets according to various applications were evaluated. The experiments were performed with single-glazed and double-glazed windows and three types of air-bubble sheets of different air volumes. U-values are used and were calculated for the determination of the thermal performances that are based on the KS F 2278. The maximum decrease of the U-value was measured as 1.092 when a sheet was attached onto the frame of single-glazed window. The square-like air-bubble sheet that contains the largest air volume shows the highest thermal-resistance value. Double layers of the air-bubble sheets show better performances than those of the single layers on both sides of the windows.

• Journal of the Korean Solar Energy Society
• /
• v.28 no.4
• /
• pp.35-42
• /
• 2008

Besides genuine skin and clothes, it is called that building is third skin for us. That means the skin of buildings is the most important factor for our man-made environment. The issues in designing the building envelope include the insulation, infiltration, ventilation and bridging in windows. Getting light into the space safely and providing views to outdoor, additionally, are key things with the building envelope design. A deep-rooted preference for full view is still alive with large area of glass. Balcony expansion is legalized in apartment houses, which causes lots of environmental problems. Without balcony space, the adjacent space to unshaded window is exposed to the direct sun. A window can have many layers and the inner space can be utilized with an automatic blind system. Recently, the refurbished version of a double-glazed window system has been developed for the purpose of minimizing energy loss occurred around windows. For the better daylight control with equipped blind system, a set of adjustment technique of blind slats was tested in a mock-up building and recommended the detail operation. Not surprisingly, the optimized blind system can be oriented to enhance the uniformity in light distribution and direct glare from the sky as well..

• Korean Journal of Metals and Materials
• /
• v.47 no.10
• /
• pp.667-674
• /
• 2009

High temperature wear of STD 61 tool steels sliding against the Al-9%Si coated steels used for hot press forming has been studied in comparison with that of the tool steels sliding against the uncoated steels. Wear tests have been performed using a pin-on-disc configuration under an applied normal load of 50N for 20 min with heating the coated and uncoated steels up to 800$^{\circ}C$. It was found on the worn surface of the STD 61 tool steels sliding against the Al-9%Si coated steels that the formation of the glazed layers containing Al transferred from the coated tribopair may contribute to a reduction of the coefficient of friction, and detachment in part occur due to delamination wear, resulting in higher specific wear rate. On the other hand the Fe-oxide wear debris entrapped on the softer surface of the uncoated steels can act as a tribosurface, leading to decreased adhesive wear of the STD 61 tool steels, resulting in a lower specific wear rate.

• Conservation Science in Museum
• /
• v.29
• /
• pp.65-80
• /
• 2023

This study investigated seven specimens of lead-glazed paving bricks in order to identify the materialistic characteristics of the lead glaze used for paving bricks during the late Unified Silla period in Korea. The samples were excavated from the Beopgwangsa Temple site, Pohang. As a result of observing the surface and cross-section of the glaze with a microscope, the study confirmed that the lead glaze demonstrates various traits of hydration, which were classified into four layers: Surface layer, hydration layer A, hydration layer B, and green layer. After measuring the composition of each layer with SEM-EDS analysis, the green layer was found to have been less affected by the external environment, which renders it highly reasonable to view the green layer as the original composition of the lead glaze. The green layer is a low-temperature glaze composed mainly of PbO and SiO₂ at a ratio of 8:2, with approximately 2% CuO acting as the main colorant. Comparing the green layer composition with those from Gyeongsang-do, it was confirmed that the mixture ratio of lead glaze materials was similar to other sites such as the Sacheonwangsa Temple site, the Cheonryongsa Temple site, and the Buseoksa Temple site.