• Journal of the Korean Ceramic Society
• /
• v.42 no.6 s.277
• /
• pp.405-410
• /
• 2005

In the hard oxidizing fire iron red glaze which colorated red exposed magnesioferrite and whitlockite-type crystals. And whitlockite-type crystals has formed before magnesioferrite forming in the step of sintering. This study tries to identify the coloration mechanism of hard oxidizing fire iron red glaze by the experiment of substitution of whitlockite-like crystals and to confirm such substitution be able to farm magnesioferrite. As the results of experiment, magnesioferrite was appeared during substitution of two kinds of whitlockite-type. It can be considered that the magnesioferrite colors the iron glaze to red with covering the glaze surface.

• Journal of the Korean Ceramic Society
• /
• v.51 no.5
• /
• pp.487-491
• /
• 2014

In this study, we measured the thermally and chemically induced residual stresses on glaze using the photoelastic method. Porcelain with thermally induced residual stress showed compressive stress of 49 MPa for thermal expansion mismatch and a locally fluctuated stress field over the glaze layer due to compensation of compressive stresses around pores. In the case of chemically strengthened porcelain, the compressive stress on the glaze was 151 MPa which was around 3 times higher than the stress on thermally strengthened glaze. The trend of fracture strength of thermally and chemically strengthened porcelains was coincident with that of the residual stress of porcelains.

• Journal of the Korean Ceramic Society
• /
• v.50 no.6
• /
• pp.518-522
• /
• 2013

This study investigatesthe coloration mechanism by identifying the factor that affects thered coloration of copper red glazesin traditional Korean ceramics. The characteristics of the reduction-fired copper red glaze's sections are analyzed using an optical microscope, Raman spectroscopy, scanning electron microscopy (SEM) and energy dispersive x-ray spectroscopy (EDX). The sections observed using an optical microscope are divided into domains of surface, red-bubble, and red band. According to the Raman micro spectroscopy analysis results, the major characteristic peak is identified as silicate in all three domains, and the intensity of $Cu_2O$ increases toward the red band. In addition, it is confirmed that the most abundant CuO exists in the glaze bubbles. Moreover, CuO and $Cu_2O$ exist as fine particles in a dispersed state in the surface domain. Thus, Cu combined with oxygen is distributed evenly throughout the copper red glaze, and $Cu_2O$ is more concentrated toward the interface between body and glaze. It is also confirmed that CuO is concentrated around the bubbles. Therefore, it is concluded that the red coloration of the copper red glaze is revealed not only through metallic Cu but also through $Cu_2O$ and CuO.

• Journal of Conservation Science
• /
• v.35 no.1
• /
• pp.33-40
• /
• 2019

During the conservation and maintenance of the birthplace center yard of President Asan Yoon Bosun, four porcelain enamel dishware were excavated from the central yard well. The glaze layer of excavated enamel was severely damaged; hence, the conservation process was done rapidly. In addition, scientific investigation and analysis were conducted to confirm the material properties of the glaze layer. It was confirmed that the outer surface was inverted and dried, while the inner surface was upright and fired during the glazing and drying process by measuring the film thickness. By examining the breakup phenomenon, the breaking up of the white enamel on the colored enamel was confirmed. This indicates that the colored glaze rose to the surface depending on the density of the colored glaze and white glaze. The investigation of the cross-section of the film confirmed that the lower layer formed according to the bonding properties with metal during the glazing process. Analysis of the constituents of the identified lower layer confirmed that there are differences between the specific components of the metal oxide of the lower layer and the surface color development of the upper layer.

• Journal of Technologic Dentistry
• /
• v.44 no.4
• /
• pp.111-117
• /
• 2022

Purpose: This study was conducted to compare the Vickers hardness on the denture acrylic resins using the glaze color system. Methods: The specimens (20×2 mm) were prepared by mixing according to the manufacturer's protocols through thermal polymerization and self-polymerization. The surface roughness was measured using a testing machine after water-soaking for 48 hours. For the Vickers hardness measurement, the completed specimen was soaked in water for 48 hours and then applied at 200 gf for 30 seconds. Was the specimen immersed after being soaked in water for 48 hours at temperatures of 5℃ and 55℃, respectively, for 30 seconds for the thermos-cycling treatment, and it was carried out 5,000 times. Results: Surface roughness was higher in the more glazing group than in the control group. A significant difference was observed in all groups, except for the Retec Don 2000 and Luciton 199 groups (p<0.05). As a result of measuring the Vickers hardness, the treatment by glaze color showed slightly lower but the thermo-cycling treatment group appeared higher than control group in all. Conclusion: Therefore, the glaze color was found to affect the surface roughness and showed a significant difference. The surface glaze color showed a very high Vickers hardness after the thermo-cycling treatment, indicating that the surface-strengthening effect is greater in the oral environment.

• Economic and Environmental Geology
• /
• v.57 no.3
• /
• pp.343-352
• /
• 2024

Composition analysis and lead isotope ratio analysis were conducted to determine the coloring machanism on lead glaze used in Gyeongbokgung Palace and the provenance of the lead used as a flux. 31 blue tiles were classified into green, blue, and yellow. The chemical analysis of lead glazes on the blue tiles revealed that Pb, Si, and Cu were the main components, and trace amounts of Fe, Ca, Mg, and Al were detected. The Cu content was high in blue lead glaze, while Cu was not detected in yellow or brown lead glaze which instead had high Fe content. Therefore, it was found that lead was used as a flux and copper oxide as a coloring agent in the production of lead glaze. In addition, the lead isotope ratios of the lead glaze used in the blue tiles of Gyeongbokgung palace were plotted in zone 3 on the distribution map of lead isotope ratios on the Korean Peninsula, which includes Chungcheong-do and Jeolla-do. It is presumed that the flux for the lead glaze was sourced from galena found in these regions. The lead isotope ratios of the green glaze from the Three Kingdoms and Unified Silla period were mostly located outside the Korean Peninsula, showing that the provenance of lead had changed. In particular, the lead isotope ratios of the green glaze from the Three Kingdoms and Unified Silla period suggest exchange with neighboring countries. Also the lead isotope ratios of the green glazes from the same temple are different, so it is believed that they were made at different times or in different workshops.

• Conservation Science in Museum
• /
• v.29
• /
• pp.65-80
• /
• 2023

This study investigated seven specimens of lead-glazed paving bricks in order to identify the materialistic characteristics of the lead glaze used for paving bricks during the late Unified Silla period in Korea. The samples were excavated from the Beopgwangsa Temple site, Pohang. As a result of observing the surface and cross-section of the glaze with a microscope, the study confirmed that the lead glaze demonstrates various traits of hydration, which were classified into four layers: Surface layer, hydration layer A, hydration layer B, and green layer. After measuring the composition of each layer with SEM-EDS analysis, the green layer was found to have been less affected by the external environment, which renders it highly reasonable to view the green layer as the original composition of the lead glaze. The green layer is a low-temperature glaze composed mainly of PbO and SiO₂ at a ratio of 8:2, with approximately 2% CuO acting as the main colorant. Comparing the green layer composition with those from Gyeongsang-do, it was confirmed that the mixture ratio of lead glaze materials was similar to other sites such as the Sacheonwangsa Temple site, the Cheonryongsa Temple site, and the Buseoksa Temple site.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.28 no.6
• /
• pp.243-249
• /
• 2018

Ceramic tiles, which were manufactured through high-temperature firing process at over $1000^{\circ}C$, are widely used as interior and exterior materials for building construction due to their excellent durability and aesthetic of surface glaze. In recent years, the introduction of digital ink-jet printing in ceramic tiles for architectural use has been rapidly proceeding, and studies on the materials such as ceramic ink, ceramic pigment, glaze have been actively conducted. In this study, the effect of microstructure change of surface glaze on the printing properties of ceramic inks was investigated by micronization of kaolin, which is the raw material of surface glaze. Black ceramic ink was used for ink-jet printing on the surface glaze of ceramic tile to evaluate the printability by measuring the size and roundness of the printed ink dot. The relationship between microstructure change of surface glaze and printability of ceramic ink was also investigated by analyzing the surface roughness and internal micropore distribution of surface glaze.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.33 no.6
• /
• pp.234-243
• /
• 2023

Zinc crystals of ZnO and SiO₂ in glaze raw materials, developed according to composition and firing requirements, are preferred because of their high decorative properties. However, most zinc crystal glazes have a high firing temperature and a narrow firing temperature range, making it difficult to use them as commercial glazes in ceramics. Therefore, in this study, it was expected that the firing temperature of a typical zinc crystal glaze could be lowered to below 1270℃ by using the eutectic effect through mixing frit, the main raw material used in manufacturing zinc crystal glaze. As a result, not only was the formation temperature of zinc crystals lower in the mixed frit glaze, but also the firing temperature range was widened to 1230~1270℃, making it possible to develop a glaze that produces crystals stably. The firing temperature was lowered to 1230~1250℃ and the holding temperature during cooling was lowered to about 950℃, resulting in the development of an economically effective glaze. When using a combination of frit, it has been shown that the holding temperature during cooling affects the recrystallization of zinc crystals depending on the composition of the glaze, and the crystal structure can be adjusted at this time. Additionally, the amount and shape of crystals can be controlled by using a nucleating agent.

• Journal of the Korean Ceramic Society
• /
• v.46 no.3
• /
• pp.253-262
• /
• 2009

The purpose of this study is to find out optimum conditions for zinc crystalline glaze under variables of firing: maximum firing temperature, crystal growth temperature, temperature increasing speed, annealing speed, holding time at maximum temperature and holding time at crystal growth temperature. Ferro Frit3110, ZnO and Quartz were used as starting materials and tested by three component system. The best result of test was selected and extended to its vicinity as five glaze formulas. And then the specimens were experimented by variable firing conditions and analyzed by crystal appearance observation, XRD, FT-IR and Raman spectroscopy. In result, main crystal was willemite in the zinc glazes. Some gahnite was detected in specimens which were fired at $1230^{\circ}C$, $1250^{\circ}C$ and $1270^{\circ}C$, however gahnite was not identified at $1300^{\circ}C$. Optimum zinc crystalline glaze was gained by following firing condition: temperature increasing speed $5^{\circ}C$/min, holding 1 h at $1270^{\circ}C$, annealing speed $3^{\circ}C$/min till $1170^{\circ}C$, holding 2 h at $1170^{\circ}C$ then naturally annealed.