• 제목/요약/키워드: glaze

검색결과 213건 처리시간 0.023초

도자기 소지구성 산화철, 산화마그네슘이 유약과의 반응 (Reaction Iron Oxide and Magnesium Oxide in Ceramics Body with Glaze)

  • 정석;황동하;이병하
    • 한국재료학회지
    • /
    • 제24권7호
    • /
    • pp.363-369
    • /
    • 2014
  • This is the study on diffusion of ceramic body oxide compounds to glaze. For ceramic bodies, no ferrous oxides contain white ware, celadon, and 3 wt% iron oxides contained white ware was used in this experiment. These ceramic bodies were glazed by transparency glaze, iron oxides contained glaze, and glaze made by pine tree ash that treated in 1240 degree, under reduction condition for an hour. An electron probe microanalyzer(EPMA) was used to study diffusion of oxides and to calculate distance of ceramics bodies. As a result, only iron oxide and magnesium oxide from the body diffused to glaze, and also made a band which shown very thin layer of iron oxide and magnesium oxide between the body and glaze. The densest band of iron oxide formed 100 to $150{\mu}m$ in the glaze, and the densest band of magnesium oxide was found 50 to $100{\mu}m$ in the glaze. Therefore, it could be concluded that iron oxide in the body is diffused to the glaze and it affects the color of glaze, even though iron oxide exists in the glaze. Furthermore, the thickness of the glaze has an effect on the color of celadon.

기본유의 변화가 안료의 발색에 미치는 영향과 Computer D-base해석 (Effect of Variable Base Glaze on the Gradation of Colouring and Analysis of The Computer D-Base)

  • 임희진;최성철
    • 한국세라믹학회지
    • /
    • 제36권4호
    • /
    • pp.333-342
    • /
    • 1999
  • This research was performed to investigate how the basic glaze change affected colour development at high temperature with a stable colorant (spinel structure CoAl2O4 pigment) The compounded pigment which is widely used for porcelain was also tested for the basic glazes adaptability. The data from the test were recorded in a computer data-base program. Therefore could be easily used in the study related with a pottery field. CoO : Al2O3 system spinel pigment of barium glaze lime glaze zinc glaze lead glaze and talc glaze were chosen for this study. The colors of Cobalt blue bright blue, blue purple were seen at the wave lengths of 455-480nm at the firing temperature of 1250$^{\circ}C$. Stable color were obtained from lime glaze bar-ium glaze zinc glaze. All the information in the database were used to examine all the possible result of the test in the study of porcelain. When the test results database were examined in all temperature ranges the lack of adhesion with the pigment occurred at the temperature of 1150$^{\circ}C$. The lack of adhesion is seen due to vaporization of the lead glaze.

  • PDF

아연결정유의 결정성장에 미치는 소지의 영향 (Behavior of Crystal Growth in Zinc Crystalline Glaze with the Bodies)

  • 이지연;이병하
    • 한국세라믹학회지
    • /
    • 제48권2호
    • /
    • pp.121-126
    • /
    • 2011
  • The study investigates the effects of a body that influences the nucleation and growth of crystal by experiment the application of zinc crystalline glaze to five of the most favorably used kinds of bodies sold in the market. As a result, in all bodies used in the test, willemite crystal is appeared on the surface and in the case of white porcelain, super white and white porcelain sculpture clay, beautiful crystals is developed. The reason that crystal does not grow and trickle down by sticking to the body in celadon clay and Sanchung clay is the large surface tension of glaze by ingredient CaO which is more often present compared to other bodies. In glaze, the ingredients $Al_2O_3$ and RO greatly influences the surface tension, and adhesion of the glaze and the body is completed by the glaze's power to stick, which is determined by the reaction of both the glaze and the body. However, in the case of Sanchung clay, the CaO in body reacts to the glaze, and glaze, on Sanchung clay, has tendency to run more compared with other bodies. It is supposed that this mechanism influences the growth of willemite crystal and the glaze's adhesion to the body.

Willemite 결정유에 NiO 첨가가 발색에 미치는 영향 (Effect of Color Development of Willemite Crystalline Glaze by Adding NiO)

  • 이지연;이병하
    • 한국세라믹학회지
    • /
    • 제47권6호
    • /
    • pp.598-602
    • /
    • 2010
  • When metal oxides are added into crystalline glaze, colors of glaze and crystals are similar as colorants generally. But the case of NiO in zinc crystalline glaze is different from general color development. When NiO is added to zinc crystalline glaze it can develop two or three colors. The active use of color development mechanism by adding NiO to the zinc crystalline glaze to control color of the base glaze and crystal with stability is investigated. This report is expected to contribute to the ceramic industry in improving application of zinc crystalline glaze. For the experiment of NiO, the quantity of NiO additives is changed to the base glaze for the most adequate formation of willemite crystal from previous research and firing condition: temperature increasing speed $5^{\circ}C/min$, holding 1 h at $1270^{\circ}C$, annealing speed $3^{\circ}C/min$ till $1170^{\circ}C$, holding 2 h at $1170^{\circ}C$ then naturally annealed. The samples are characterized by X-ray diffraction (XRD), UV-vis, and Micro-Raman. The result of the procedure as follows; Ni substitutes for Zn ion then glaze develops blue willemite crystals, as if cobalt is used, on brown glaze base. When NiO quantity is increased to over 5 wt%, willemite size is decreased, and the density of the crystal is increased, at the same time $Ni_2SiO_4$ (olivine) phase, the second phase, has been developed. The excessive NiO is reacted with silicate in the glass then developed green $Ni_2SiO_4$ (olivine), and quantity of $Ni_2SiO_4$ (olivine) is increased as quantity of willemite is decreased. It is proved to create three colors, blue, brown and green by controlling the quantity of NiO to the zinc crystalline glaze and it will improve the multiple use of colors to the ceramic design.

New Glaze Composition for Chemical Strengthening of Bone China

  • Kim, Hyeong-Jun;Han, Yoon Soo;Park, Hyung-Bin;Park, Jewon;Na, Hyein;Choi, Sung-Churl
    • 한국세라믹학회지
    • /
    • 제55권3호
    • /
    • pp.299-306
    • /
    • 2018
  • In order to improve the hardness of commercial bone china, we suggested a chemical strengthening process and new glaze for its process. New glaze contained about two times more $Na_2O$ and $Al_2O_3$ and had a higher transition temperature than that of commercial frit. Chemical strengthening enhanced the hardness of the new glaze-coated bone china by over 30% compared to that of commercial product. The change of glaze composition influenced potassium ion diffusion distance and depth of strengthened layer during chemical treatment. After chemical strengthening of new glaze-coated bone china, the residual compressive stress inside the glaze was measured and found to be greater than 160 MPa.

도재수복물의 표면첨색시 온도에 따른 색조안정성과 표면조도의 평가 (COLOR STABILITY AND SURFACE TEXTURE TO TEMPERATURE AT STASHING OF PORCELAIN RESTORATION)

  • 백은주;배태성;송광엽;박찬운
    • 대한치과보철학회지
    • /
    • 제29권3호
    • /
    • pp.87-99
    • /
    • 1991
  • The effect of oven firing on the color stability and surface texture of extrinsic stains used characterization and color modification of metal cermic restoration were studied by comparing different temperatures and techniques. They were autoglaze technique, applied glaze technique, two step low-fusing glaze technique and one step low-fusing glaze technique. Autoglaze technique and applied glaze technique were air-fired to manufacturer's recommended temperature. Two step low-fusing glaze technique is separated staining and overglazing. Thin slurry of stain powder were air-fired to $1500^{\circ}F$, Overglaze powder powder was then mixed with seam medium and air-fired to $170^{\circ}F$. One step low-fusing glaze technique is combined staining and overglazing. Thin slurry of stain and glaze powder were air-fired to $170^{\circ}F$. The obtained results were as fellows. 1. Slightly significant color differences by colorimeter were found between different stain application and fusion techniques(P<0.05). 2. Two step low-fusing glaze method showed the most rough surface, especially ceramco orage stain(P<0.05). 3. Surface roughness increased gradually in order of autoglaze, applied glaze, one step low-fusing glaze but they were not significantly different(P<0.05). 4. When two step low-fusing glaze was applied, both color measurement and surface texture were sinificantly different from other groups(P<0.05).

  • PDF

오지그릇용 무연생유에 관한 연구 (A Study on the Leadless Raw Glaze for Domestic Earthen Ware)

  • 이희수;정영기;최세영
    • 한국세라믹학회지
    • /
    • 제13권2호
    • /
    • pp.17-23
    • /
    • 1976
  • The study is an attempt to prepare the raw graze can replace the lead glaze that has been used for a long time as Korean Kimchi-jars. 1) The batch of the glaze that show the similar properties and appearance of lead-glaze were 40% of Yongin or Anseong Yakto, 40% of Ash and 20% of Anhydrous-Colemanite. It's Seger Formula was {0.86 CaO 0.02 MgO 0.12 KNaO} {0.26 Al2O3 0.0007 Fe2O3} 0.92 SiO2 0.3 B2O3 2) The firing temperature of selected glaze was 950-1050℃. 3) As the content of anhydrous-Colemanite was increased, the thermal expansion coefficient was decreased. 4) The color of leadless raw glaze was translucent light yellow. It was possible to obtain the same color as lead glaze by Fe2O3 and MnO2.

  • PDF

Glaze Development with Application of Unity Molecular Formula

  • No, Hyunggoo;Kim, Soomin;Kim, Ungsoo;Cho, Wooseok
    • 한국세라믹학회지
    • /
    • 제53권5호
    • /
    • pp.535-540
    • /
    • 2016
  • Effects of compositions and sintering conditions on glaze properties are shown in the diagram constructed by using the unity molecular formula (UMF) method in this study. Glossy characteristics of glaze were clearly differentiated by compositional area in the diagram and sintering process. As alumina and silica contents were increased, texture of the glaze became rough and opaque, akin to having been devitrified or underfired. The correlation between glossiness and surface roughness was found to be non-linear and inversely proportionate. Crystalline phases formed in the glaze were also influenced by the compositional area. Due to the high concentration of CaO, anorthite and wollastonite were formed depending on the compositions. Hardness was increased with an increase of alumina and silica concentrations in the glaze.

진사 유약의 발색 특성 연구 (Coloration Characteristics of Copper Red Glaze)

  • 어혜진;이병하
    • 한국재료학회지
    • /
    • 제23권7호
    • /
    • pp.399-403
    • /
    • 2013
  • The purpose of this study is to investigate the coloration characteristics by identifying the factor affecting red coloration of copper red glaze in traditional Korean ceramics. This study analyzed the characteristics of the reduction-fired copper red glaze by using XRD, Raman spectroscopy, EDX and UV-vis spectroscopy. As a result of XRD analysis, the glaze completely melted and amorphous glass appeared overall, and the characteristic peak of metal Cu was shown together. In addition, as a result of Raman analysis, the characteristic bands of CuO and $Cu_2O$ were shown together. The distribution of component elements was observed by EDX. As a result, copper(Cu) were distributed throughout the glaze. Thus, it was shown that copper red glaze appeared the best red coloration because metal Cu, CuO and $Cu_2O$ evenly existed throughout glaze in particle colloidal state. The chroma value of the copper red glaze was CIE $L^*$ 30.07, $a^*$ 13.65, $b^*$ 3.72. Wine-Red Solution was shown by Dark Graish Red coloration.

여러 가지 나무재를 이용한 도자기용 유약제조와 색상 특성 (Glaze from Wood Ashes and their Color Characteristics)

  • 한영순;이병하
    • 한국세라믹학회지
    • /
    • 제41권2호
    • /
    • pp.158-164
    • /
    • 2004
  • 우리 주변에서 쉽게 구할 수 있는 12가지 나무와 참나무잎, 소나무껍질 등을 나무 부위별로 구분하여 나무재를 만들어 한국적 천연 재유의 특성을 연구ㆍ분석한 결과 나무재의 주성분은 CaO이며 소나무껍질재는 $SiO_2$, 참나무잎재의 주성분은 CaO와 $SiO_2$이다. 아카시아나무재, 미루나무재 및 대추나무재는 다른 나무재에 비해 MgO와 Fe$_2$ $O_3$ 성분이 많이 함유되어 있어 노랑색기를 띤 녹색유약으로 나타났으며 UV에 의한 4분류 중 가장 채도가 높아 맑은 색을 지닌 투명유 제조에 적합하다. 포도나무재, 배나무재 및 참나무재는 재 안에 많이 함유된 Fe$_2$ $O_3$, MgO 및 MnO의 영향을 받아 UV 분석결과 노랑색기를 띤 녹색 현상이 나타났으며 다른 나무재보다 P$_2$ $O_{5}$의 함량이 많아 온화하고 안정된 느낌을 주는 유백현상이 강하게 나타나 유백유 제작에 적합하다. 소나무재, 플라타너스나무재 및 느티나무재는 다른 나무재에 비해 CaO 성분과 P$_2$ $O_{5}$ 성분이 많아 12가지 나무재 중 가장 선명하고 푸른색기가 많은 녹색 현상이 나타나 청자유약제조에 적합하다. 자작나무, 참나무, 밤나무는 소량으로 유약의 색상에 많은 영향을 주는 MnO가 가장 많이 함유되어 있고 아카시아나무재, 미루나무재, 대추나무재 보다는 약하지만 노랑색기를 띤 녹색유 현상이 나타나 이라보 유약 제조에 적합하다.