• Journal of Broadcast Engineering
• /
• v.23 no.2
• /
• pp.246-252
• /
• 2018

Hand gestures are attracting attention as a NUI (Natural User Interface) of wearable devices such as smart glasses. Recently, to support efficient media consumption in IoT (Internet of Things) and wearable environments, the standardization of IoMT (Internet of Media Things) is in the progress in MPEG. In IoMT, it is assumed that hand gesture detection and recognition are performed on a separate device, and thus provides an interoperable interface between these modules. Meanwhile, deep learning based hand gesture recognition techniques have been recently actively studied to improve the recognition performance. In this paper, we propose a method of hand gesture recognition based on CNN (Convolutional Neural Network) for various applications such as media consumption in wearable devices which is one of the use cases of IoMT. The proposed method detects hand contour from stereo images acquisitioned by smart glasses using depth information and color information, constructs data sets to learn CNN, and then recognizes gestures from input hand contour images. Experimental results show that the proposed method achieves the average 95% hand gesture recognition rate.

• Journal of Korean Elementary Science Education
• /
• v.26 no.3
• /
• pp.276-285
• /
• 2007

The purpose of this study was to observe five teachers' science classes and analyze the patterns of their analogies. To analyze the data, investigator triangulation was used, and the results were as follows: First, among the patterns of analogy used, expressions of similes and metaphors were utilized by all the teachers; teachers with over ten years' experience used adult's daily phrases, and teachers with under ten years' experience tended to use anthropomorphism. Regarding pictorial analogies, these manifested themselves in the sixth period, while teachers with over ten years' experience drew a simple picture about circulation of water, teachers with under one year's experience made additional materials for their analogy and they put an emphasis on the concept of the circulation itself. Teachers tended to use analogs according to their interests; teachers who majored in science education used pictorial analogies for further study. Second, the patterns emerging from the correspondence of the analogy manifested themselves in all the teachers equally, but they have no relation to the teacher's background. Third, routine analogy and artificial analogy appeared equally in consideration of degree of artificiality among the patterns of the analogies used. Regarding routine analogy, most teachers tended to look for analogs from things and experiences from themselves or their own backgrounds rather than those of the students. Regarding artificial analogies, teachers tended to purposely choose analogs to help students to understand; energetic teachers sometimes failed to choose appropriate analogs because they approached the topic with too much intensity. While a teacher who lacked experience and interest in science used many expressions of analogy, a teacher who felt some degree of constraint rarely used expressions of analogy. Fourth, most of the teachers used analogs familiar to their own experiences but students often found understanding these analogs difficult. Therefore, teachers need to make greater efforts to utilize analogs which are especially familiar to students when they attempt to explain science concepts.

• Journal of the Korean GEO-environmental Society
• /
• v.12 no.4
• /
• pp.17-24
• /
• 2011

For the purpose of cut off and ground stabilization, water glass chemical grouting method using sodium silicate has problems of weakening durability and ground water pollution because leaching was conducted when the homogel is exposed to the ground water as time elapses. The purpose of this study is to identify the effect of alkali silica sol ground injection materials, it was compared with the sodium silicate ground injection materials using water glasses. For sodium silicate and alkali silica sol by mixing each case is divided into four different specimens were made and tested. The characteristic of alkali silica sol ground injection material was analyzed by unconfined compression test and environmental impact statement of ordinary portland cement and blast furnace slag cement. Alkali silica sol specimens were made mixing A-solution and B-solution in the proportion of one on one. Through this study, alkali silica sol ground injection mixing blast furnace slag cement has excellent strength and environment-friendly.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.35 no.1
• /
• pp.58-62
• /
• 2022

Objectives : The aim of this study is to report the effect of long-term acupuncture on a amblyopia derived from astigmatism. Methods : A 39-month-old-female child presented with decreased visual acuity with simple astigmatism and amblyopia in the left eye. She took long-term acupuncture treatment once or twice a week for almost four years. And the autorefractor follow-up were conducted per every 6 months. Results : At the initial visit, naked eye visual acuity was 0.1/0.7(OD/OS), Sph. +0.00D, Cyl. -2.25D, AXIS 148° in the right eye, and Sph. +0.00D, Cyl. -0.25D, AXIS 49° in the left eye. After acupuncture treatment for about 4 years without correctional glasses, the visual acuity of the right eye was 1.0, the right eye had Sph. +0.00D, Cyl -0.50D, AXIS 146°, and the left eye had Sph. -0.25D, Cyl -0.50D, AXIS 154°. The visual acuity was maintained until 1 year follow up as 0.9/1.0(OD/OS). Conclusions : This study shows the possibility of using acupuncture treatment for amblyopia derived from astigmatism.

• Journal of Powder Materials
• /
• v.16 no.5
• /
• pp.358-362
• /
• 2009

Ti$_{50}$Cu$_{20}$Ni$_{20}$Al$_{10}$ quaternary amorphous alloy was prepared by high-energy ball milling process. A complete amorphization was confirmed for the composition of Ti$_{50}$Cu$_{20}$Ni$_{20}$Al$_{10}$ after milling for 30hrs. Differential scanning calorimetry showed a large super-cooled liquid region ($\Delta$T$_x$ = T$_x$ T$_g$, T$_g$ and T$_x$: glass transition and crystallization onset temperatures, respectively) of 80 K. Prepared amorphous powders of Ti$_{50}$Cu$_{20}$Ni$_{20}$Al$_{10}$ were consolidated by spark-plasma sintering. Densification behavior and microstructure changes were investigated. Samples sintered at higher temperature of 713 K had a nearly full density. With increasing the sintering temperature, the compressive strength increased to fracture strength of 756 MPa in the case of sintering at 733 K, which showed a 'transparticle' fracture. The samples sintered at above 693 K showed the elongation maximum above 2%.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.8 no.1
• /
• pp.179-186
• /
• 1998

We have been investigated the effects of the initial pH of the aquous solution, reaction temperature and time for the flaking of the soda-lime glass container. Flaking of glass occuurred in the cases of the $121^{\circ}C$, above pH 11 of solution with no $Mg^{2+}$ ions in solution. The pH of the solution approached to pH 10 under the conditions of below pH 9 of start solution. The flaking mechanism of the glass seem to be composed of formation of leached layer of $Ca^{2+}$ and $Na^{2+}$ ion and separation of these layers during the cooling by the difference of thermal expansion between leached layer and glass surface. The leaching of alkali ions in glass depends on the pH condition of the start solution and the temperature. In the case of $Mg^{2+}$ ions are added, $Mg^{2+}$ ions accelerate the flaking of the sodalime glasses and forms the magnesium silicate compound which result in the decrease of the pH of the solution.

• Journal of Korean Ophthalmic Optics Society
• /
• v.3 no.1
• /
• pp.217-222
• /
• 1998

Coating films of $SiO_2-TiO_2-AgO$ have been prepared on soda-lime-silica slide glasses and single crystal silicon wafer by the sol-gel method using a spin-coating technique. Commercially available tetraethyl orthosilicate, titanium trichloride, and silver-nitrates were used as starting materials. The heat treatment temperature of this coating films was $500^{\circ}C$ properly, obtained from TG-DTA result. The films with thickness of 310 nm were prepared by 5 times coating. In the case of l0 mol% AgO, the film showed a crack-free and smooth surface, but the higher Ago content exhibited the more pin hole and the segregated cluster of AgO. The IR absorbance of the films decreased in the range of 400 nm to 700 nm with the increase of annealing temperature. And the reflectance of the coating films decreased and the color was changed light yellow to white yellow with the increase of Ago content.

• Journal of the Korea Convergence Society
• /
• v.10 no.12
• /
• pp.177-181
• /
• 2019

The purpose of this study was to investigate the degree of blocking of blue light of the tips and goggles of the curing light during the dental treatment using the blue light of the light curing. The light curing tips and goggles were placed on a UV-Vis spectrometer and the results of light transmission were analyzed. Comparative analysis. As a result, all four types of light curing tips used in the analysis showed excellent blue light blocking effect. In the case of safety goggles, red-type goggles showed blue light transmittance similar to those of light curing than yellow-type goggles. As a result, it is recommended that the attachment of the light curing with high degree of blue light blocking and the wearing of safety glasses are necessary to protect the eyes. This behavior is thought to reduce persistent irritation and fatigue in the eyes.

• Journal of agricultural medicine and community health
• /
• v.16 no.2
• /
• pp.179-194
• /
• 1991

Despite its universal coverage of health insurance, the rural health insurance program(RHIP) stands at the crossroads in Korea. The RHIP has weaknesses in stability of financing, problems of inequities in the provision of health services and has suffered from high cost of running the program. The author has analyzed these problems from the perspective of health insurance policy and presented several options for improvement. First of all, this study urged the importance of a firm Governmental commitment of RHIP with the 50% subsidization of contributions as the Government had promised, instead of the current 40%. This can be justified from the 20% subsidization by the Government for the contributions of private school teachers and their dependents, who belong to richer segments of the population. Second, various cost containment measures ought to be sought curbing the rising demand for medical through strengthening health education and increasing individual responsibility, and tightening the claim review process. Third, this study requires the Government to run a demonstration project on the introduction of case payment system for primary health care. Fourth introducing an income-related cost sharing scheme is another possibility. Reforming the cost sharing formula for large medical expenditures is recommendable for a beginning. This measure can take the form of tax credit for medical expenditures of the poor. Fifth, the degree of financial adjustment among health insurance plans should be levelled up for enhancing stability of RHIP and social solidarity. Sixth, health policy should be redirected toward development of rural health resources and higher priority should be put on relieving difficulties in access to care. Seventh. the insurance plan owned-hospital needs to be developed or provision of health services in the medically underserved areas, and the need of such facilities is particularly acute for geriatric care, rehabilitation and renal dialysis, etc. Eighth, more generous insurance benefits are required of the elderly who are suffering the most : elimination of the maximum 180 days of benefit period and provision of glasses and artificial dentures, etc. Ninth. the economies of scale principle is working for the operating expenses of regional self-employed insurance plan. Thus, measures should be instituted to pursue an optimum size of health insurance plans. Lastly, excessive dependence on exclusion items is an evil so that some radical remedies are urgently required to cut them.

• Archives of Plastic Surgery
• /
• v.42 no.6
• /
• pp.776-782
• /
• 2015

It is believed that surgery on human immunodeficiency virus (HIV)-positive patients is dangerous and should be avoided due to the possibility of postoperative infection of the patients or HIV occupational transmission to the medical staff. We discuss here the preparations and measures needed to conduct surgery safely on HIV-positive patients, based on our experience. We performed sex reassignment surgery on two HIV-positive patients from January 2013 to January 2015. Both of them were receiving highly active antiretroviral therapy and were asymptomatic, with a normal CD4 count ($>500cells/{\mu}L$). The HIV-RNA was undetectable within the bloodstream. All the staff wore protective clothing, glasses, and three pairs of protective gloves in the operating room because of the possibility of transmission. Prophylactic antibiotics were administered to the patients, and antiviral therapy was performed during their perioperative course. Neither of the patients had postoperative complications, and none of the medical staff experienced accidental exposure. Both patients had satisfactory surgery outcomes without complications. HIV-positive patients can undergo surgery safely without increased risk of postoperative complications or HIV transmission to the staff through the proper use of antibiotics, active antiretroviral therapy, and supplemental protective measures with post-exposure prophylaxis for the staff in case of HIV exposure.