• Computers and Concrete
• /
• 제25권4호
• /
• pp.369-382
• /
• 2020

This paper presents a discussion of the Finite Element Analysis (FEA) when applied for the analysis of concrete elements reinforced with glass fibre reinforced polymer (GFRP) bars. The purpose of such nonlinear FEA model development is to create a tool that can be used for numerical parametric studies which can be used to extend the existing (and limited) experiment database. The presented research focuses on the numerical analyses of concrete beams reinforced with GFRP longitudinal and shear reinforcements. FEA of concrete members reinforced with linear elastic brittle reinforcements (like GFRP) presents unique challenges when compared to the analysis of members reinforced with plastic (steel) reinforcements, which are discussed in the paper. Specifically, the behaviour and failure of GFRP reinforced members are strongly influenced by the compressive response of concrete and thus modelling of concrete behaviour is essential for proper analysis. FEA was performed using the commercial software ABAQUS. A damaged-plasticity model was utilized to simulate the concrete behaviour. The influence of tension, compression, dilatancy, mesh, and reinforcement modelling was studied to replicate experimental test data of beams previously tested at the University of Waterloo, Canada. Recommendations for the finite element modelling of beams reinforced with GFRP longitudinal and shear reinforcements are offered. The knowledge gained from this research allows for the development of a rational methodology for modelling GFRP reinforced concrete beams, which subsequently can be used for extensive parametric studies and the formation of informed recommendations to design standards.

• Steel and Composite Structures
• /
• 제3권6호
• /
• pp.421-438
• /
• 2003

Aging and deterioration of existing steel structures necessitate the development of simple and efficient rehabilitation techniques. The current study investigates a methodology to enhance the flexural capacity of steel beams by bonding Glass Fibre Reinforced Plastic (GFRP) sheets to their flanges. A heavy duty adhesive, tested in a previous study is used to bond the steel and the GFRP sheet. In addition to its ease of application, the GFRP sheet provides a protective layer that prevents future corrosion of the steel section. The study reports the results of bending tests conducted on a W-shaped steel beam before and after rehabilitation using GFRP sheets. Enhancement in the moment capacity of the beam due to bonding GFRP sheet is determined from the test results. A closed form analytical model that can predict the yield moment as well as the stresses induced in the adhesive and the GFRP sheets of rehabilitated steel beam is developed. A detailed finite element analysis for the tested specimens is also conducted in this paper. The steel web and flanges as well as the GFRP sheets are simulated using three-dimensional brick elements. The shear and peel stiffness of the adhesive are modeled as equivalent linear spring systems. The analytical and experimental results indicate that a significant enhancement in the ultimate capacity of the steel beam is achieved using the proposed technique. The finite element analysis is employed to describe in detail the profile of stresses and strains that develop in the rehabilitated steel beam.

• 수산해양기술연구
• /
• 제22권1호
• /
• pp.49-57
• /
• 1986

The vibrations problem of thin orthotropic skew plates of linearly varying thickness is analyzed using the small deflection theory of plates. Using dimensionless oblique coordinates, the deflection surface can be expressed as a polyonmial series satisfying the boundary conditions. For orthotropic plates which is clamped on all the four edges, numerical results for the first two natural frequencies are presented for various combinations of aspect ratio, skew angle and taper parameter. The properties of material used are one directional glass fibre reinforced plastic GFRP. The results obtained may be summarised as follows: 1. In case of the first mode vibration of plates with increase in the skew angle, the natural frequencies of plates decrease. 2. As the aspect ratio decrease, the natural frequencies of plates decrease. 3. For the identical skew angle, natural frequencies of plates increase with the taper parameter of thickness.

• 한국음향학회지
• /
• 제13권6호
• /
• pp.50-59
• /
• 1994

유리판과 단일방향(unidirectional) 탄소섬유 강화 복합재료(CFRP)판의 표면에서 연필심을 부러뜨려 발생된 과도적 탄성파를 음원으로부터 멀리 떨어진 서로 다른 위치에 둔 두개의 탐촉자로 검출하였다. 탐촉자에 검출된 과도적 신호의 스펙트럼 분석에 의해 판에서 pulse 형태로 발생된 신호는 Lamb파 분산관계를 따르며 전파하고, 유리판과 단일방향 CFRP판에서의 과도적 신호는 최저 대칭$(S_{0})$, 1차 대칭$(S_{1})$, 1차 비대칭$(A_{l})$ 모드의 최대 군속도 주변의 성분들로 형성되었다. 이러한 최대 군속도 주변 성분은 분산이 비교적 적기 때문에 과도적 신호의 초기부분은 크게 변화되지 않았으며, $A_{1}$ 모드 단절 (cut-off)주파수 이하 영역의 $S_{0}$ 모드가 가장 빠른 군속도로 전파되고 과도적 신호 형성에 크게 기여하는 모드이었다.

• 대한토목학회논문집
• /
• 제13권4호
• /
• pp.15-25
• /
• 1993

복합재료를 효과적으로 사용하기 위하여 복합재료 구조물의 설계기준 개발을 위한 연구가 진행되고 있다. 금속 셀의 좌굴에 대한 설계시에는 초기 결함의 영향과 탄성임계좌굴응력을 근거로 한 녹다운계수(Knock-down factor)를 정의하는 것이 중요한 과정이나 복합재료 쉘의 좌굴에 대한 설계시에는 초기 결함에 대한 민감도가 거의 연구되어 있지 않은 실정이다. 복합재료 쉘의 좌굴거동에 영향을 주는 설계변수는 많기 때문에, 쉘의 설계시 이 변수들로 인한 초기 결함 민감도를 분석하기 위하여 많은 실험을 필요로 하고 있으며 실험 이외의 다른 방법으로서는 이미 검증된 수치모델을 사용하는 것이다. 본 논문에서는 복합재료 쉘요소를 개발하는데 사용된 이론을 요약, 정리 하였으며 수치예제를 통하여 본 연구에서 제안한 쉘요소의 정확성을 검증하였다. 그리고 축방향으로 압축을 받는 GFRP 곡선형 판넬의 설계시 고려해야 하는 각 변수들을 다양하게 변화시키면서 좌굴거동에 미치는 영향을 유한요소 모델링에 의해 고찰하였다. 방법으로서 초기 결합 및 두께의 진폭을 고려한 비선형 해석과 고유치 해석을 수행하였으며 이 결과를 이용하여 녹다운 계수를 산출하였다.