• Journal of the Korean housing association
• /
• v.26 no.1
• /
• pp.99-107
• /
• 2015

The purpose of this study is to present an appropriate approach to urban regeneration by analyzing Gwangju Metropolitan City. For the study, residential area of Asia Culture Complex was analyzed based on GIS. The areas concerned were categorized and looked into by their Situation based on the analysis of urban infrastructure state. However, as the architectural space within a city are limited, and accurate assessment of them is needed. The residential areas have the following characteristics. They become an aging and dilapidating residential and socially underprivileged-concentrated area. It is necessary to set up a direction for a future-oriented planning for the development of these areas. Along with a decreasing population, it is important to improve the urban architecture environment for the elderly in an aging society. The economic growth of a city if necessary for the future. Therefore, the criteria for the assessment is required. And the subsequent setting-up and planning of a future direction for a city is badly needed. After that, an accurate assessment of a city called for. City space allows for various interpretations. As the rich are getting richer and the poor are getting poorer, a wealth is concentrated on one district or an area.

• Journal of the Semiconductor & Display Technology
• /
• v.7 no.1
• /
• pp.29-34
• /
• 2008

In this paper, the DE(double erosion) cathode for the reactive magnetron sputtering system is developed for high deposition rate and high target utilization efficiency. The utilization efficiency of the developed DE cathode is 22% higher than that of normal SE(single erosion) cathode. Sputtering process for the nickel oxide thin films with the DE cathode is performed under the following conditions; power with $1kW{\sim}3kW$, pressure with 4mtorr and 8mtorr, oxygen flow ratio with $0%{\sim}80%$. As a result, the hysteresis phenomenon of discharge voltage in 4mtorr is lower than that in 8mtorr and the hysteresis phenomenon of discharge voltage is getting lower as the applied power is getting higher. The structure of cross section and surface roughness of the thin films are observed by FE-SEM and AFM. The structure of cross section of the thin films is columnar and the average surface roughness under oxygen flow ratio of 0%, 52.5% and 65.0% are $2.08{\AA}$, $2.20{\AA}$ and $0.854{\AA}$, respectively.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.25 no.5
• /
• pp.790-798
• /
• 2011

'Mu-acupuncture treatment(繆刺法)' and 'Geo-acupuncture treatment(巨刺法)' are the ways of taking acupuncture points on the sound side of a human body and not on the unsound side of a human body to treat disease, 'Mu-acupuncture treatment(繆刺法)' is applicable to 'Transverse meridian disease(絡脈病)', 'Geo-acupuncture treatment(巨刺法)' is applicable to 'Longitudinal meridian disease(經脈病)'. To diagnose a disease as transverse meridian disease or longitudinal meridian disease depends on 'Feeling pulse at the nine spots of three parts on a body for diagnosis (三部九候診)'. 'Mu-acupuncture treatment(繆刺法)' takes a 'Rak-acupuncture point(絡穴)' under a wrist and a ankle joint. The method of taking it, two ways, are 'Yu(痏)' and 'The treatment getting some blood(出血療法)'. 'Yu(?)' which is similar to 'Quick-getting acupuncture into and out (單刺法)' means the number of times doing acupuncture and is different from 'The treatment getting some blood (出血療法)' which is typically considered as 'Yu(?)'. Meanwhile, judging from the changes of the methods of feeling pulse for diagnosis and the symptoms of a certain disease, though it is a precondition that 'Biased-Gi(邪氣)' stays at 'The Large transverse meridian(大絡)' in 'The theory of Mu-acupuncture treatment(繆刺論)', it is hard to consider the symptoms of 'Transverse meridian disease(絡脈病)' described in 'The theory of Mu-acupuncture treatment(繆刺論)' as the pure symptoms of 'Transverse meridian disease(絡脈病)'.

• Journal of Korean Medical Ki-Gong Academy
• /
• v.13 no.1
• /
• pp.56-76
• /
• 2013

Objective : The aim of this study was to find the literature basis on SuGi-therapy(手氣療法) in Donguibogam. Methods : Anma(按摩), Doin(導引), Angyo(按蹻), Anap(按壓) and Chuna(推拿), the keyword of this study, were researched, analyzed and classified in Donguibogam. Results : 1) In Donguibogam, the keyword Anma(按摩) and Doin(導引) showed up 10 and 33 times, respectively and 7 and 20 times, respectively in the body except the table of contents. In considering the meaningful cases, in short, Anma(按摩) and Doin(導引) appeared 7 and 16 times, respectively. Furthermore we could know Anma(按摩) showed up 4 times with the highest frequency in Oehyeongpyeon(外形篇), and Doin(導引) showed up 11 times with the highest frequency in Naegyeongpyeon(內景篇). 2) Anma(按摩) was mostly used as a separate word and only 2 times was "Anmadoin(按摩導引)" used. In 16 meaningful cases, Doin(導引) was used as "Doinbeop(導引法)" 14 times and 2 times was "Anmadoin(按摩導引)" used in a linked form. Among 14 times when "Doinbeop(導引法)" was referred, it was stated as "Do Doinbeop(導引法)" without any detailed explanations 2 times and it was explained about how to pose when people do Doinbeop(導引法) for prevention and treatment 12 times. 3) Reviewed in Donguibogam, Anma(按摩) and Doin(導引) were the ChoGi-therapy(調氣療法) in all. Because they include both massaging by oneself and getting a massage from someone else, they all could be 'SuGi-therapy(手氣療法)' in a broad sense. 4) In Sikjeokbyeong(息積病), the 12th chapter of Jeokchwimun(積聚文) in Japbyeongpyeon(雜病篇), Doinbeop(導引法) was referred as the treatment of Jeok(積) which belongs to obstinate and incurable diseases. This means SuGi-therapy(手氣療法) could be the basis of using widely on several incurable diseases in modern society. 5) There is few paper about SuGi-therapy(手氣療法). SuGi-therapy (手氣療法) doesn't seem to form a large part in modern Korean medicine but it is a remedy that has been together with the history of Korean medicine so long and has great therapeutic effects and usefulness. From now on, the literature and clinical study on SuGi-therapy(手氣療法) should be conducted continuously and developed for the better.

• Journal of Korean Medical classics
• /
• v.24 no.4
• /
• pp.23-32
• /
• 2011

The texts of "Hwangjenaegyeong(黃帝內經)" explains Hakjil(瘧疾) in detail, especially in the "Jahak(刺瘧)" chapter, where bloodletting treatment is applied in many cases. The following paper categorized and organized Hakjil(瘧疾) cases treated by bloodletting methods, then analyzed applicable subjects and appropriate time for the procedure based on the texts. Afterwards, the mechanism for the cessation of Hakjil(瘧疾) seizures was examined. The findings of this research are as follows. 1. In the contents of "Hwangjenaegyeong(黃帝內經)", the appropriate time for acupuncture and bloodletting procedure is when Hakjil(瘧疾) seizures start to present themselves. 2. When a seizure takes place as a symptom of the body getting rid of the Hak(瘧) pathogen, Yanggi(陽氣) rushes to the locus of the pathogen, causing congestion of Gi(氣) and Blood(血) resulting in static blood[瘀血]. Therefore, bloodletting at the time of seizure initiation helps the flow of Gi(氣) and Blood(血), preventing the rush of Yanggi(陽氣). This is a restoration of the balancing function of Eum(陰) and Yang(陽), which indicates that bloodletting not only promotes smooth flow of Gi(氣) and Blood(血), but extends its effects to mental functions that balances Eum(陰) and Yang(陽). 3. Although Hakjil(瘧疾) seizures are presented in terms of Gi(氣) and Blood(血) in symptoms such as chill and fever[寒熱], static blood[瘀血], pain, etc., a fundamental disturbance in mental functions that control cold and heat seems to be present.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.19 no.1
• /
• pp.55-66
• /
• 2001

All kinds of disasters are occurring for several reasons in modern cities. So, We need the disaster management system to deal with them at this point that Those disasters are getting larger and more frequent. We organized the database into three categories; the traffic accident database on traffic accidents that is recognized as a typical disaster resulting from vehicles's increasement rapidly in modern urban life, the gas explosion disaster database on gas explosion that causes to fatal damage through broad areas, and the bridge management database that contains bridge resource information and repair record. In this study, we developed the Disaster Management System using the wireless internet GIS that can access the database and identify field information for the accident area in emergency situation as well as can modify and update the database in field directly, so that can cope with the disaster situations effectively.

• Journal of Korean Society for Geospatial Information Science
• /
• v.11 no.2 s.25
• /
• pp.3-9
• /
• 2003

Recent construction industry is going through much change as getting high-quality, high-technology and environment-friendly, and a safety countermeasure is required urgently as construction structures become larger and more complex. But, Safety management was ignored under quantity-oriented construction policy and that has led to large-scale accidents. Recently, interest for safety management and effective construction of safety management system has been enhanced. Therefore, in this study, we constructed safety management system using Mobile GIS for effective building safety management. As the result, we proposed a method which can manage buildings quickly and effectively as performing data accessibility, storage, and analysis directly in the field.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2006.04a
• /
• pp.387-392
• /
• 2006

3D-based information is needed increasingly as well as 2D Information as cities grow and buildings become large and complex, and use of 3D-models is getting attention to handle such problems. However, there are limitations in using 3D-models because most applications and research efforts using them have been for visual analysis. This study presents a method to find optimal paths in indoor spaces as an illustration for using 3D-models in spatial analysis. We modeled rooms, paths and other facilities in a building as individual 3D objects. We made it possible to find paths based on network structure by integrating the vector-based networks of 2D-GIS and 3D-model.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 2007.05a
• /
• pp.70-73
• /
• 2007

Wireless technologies and mobile devices are getting more and more powerful. This cause in the learning research area more get research about the mobile learning situation has been done by many ambitious researchers because of not only its low cost, portability, and communication, but pedagogical reason such as authentic learning and socio-constructivism. This paper describes the overview of computer supported ubiquitous learning environment. This paper also shows what this new design of the learning environment is, how to design it, and some related researches.

• 제어로봇시스템학회:학술대회논문집
• /
• 1995.10a
• /
• pp.538-541
• /
• 1995

In steel works, reheating furnace is an essential part of a rod mill plant and it treats various types of billets continuously. Although getting an optimal setting for a single billet is simple, control setting for whole groups of billets is a difficult task. In this work, we studied a detail mathematical model and optimal control setting of reheating furnace. As the mathematical model of each billet is a partial differential equation, on-line control is almost impossible for the whole billets charged into the furnace. Therefore, we tried to provide a guideline for optimal setting value of the roof(index) temperature for the target billets which account for about 20% of the charged billets.