• Geomechanics and Engineering
• /
• v.6 no.1
• /
• pp.65-77
• /
• 2014

Geosynthetic tubes inflated with water, clay slurry or sand have been widely used for large dike construction in land reclamation projects. In this paper, analytical solutions for geosynthetic tube resting on rigid foundation is presented by adopting an approach similar to that presented by Leshchinsky et al. (1996). The proposed method allows a quick preliminary design to be made for using a closed-form solution. To simplify the analysis, relationships between geometrical parameters and pumping pressure are established using numerical method. The analytical solutions were compared with several existing solutions and good agreements were achieved.

• Journal of the Korean Geosynthetics Society
• /
• v.1 no.1
• /
• pp.13-21
• /
• 2002

Geotextile tubes hydraulically or mechanically filled with dredged materials have been applied in hydraulic and coastal engineering in recent years(detached breakwater, groins and jetty). The geotextile tubes are made of sewn geosynthetics sheets. If the sandy soil is use to fill material, these inlets should be spaced closely to assure uniform filling of the tubes because sandy soil and geosynthetic is very pervious. However, the clayey soil or contaminated slurry is used, the inlets can be located relatively long distance. The fine clayey particles tend to rapidly blind the fabric slowing down water escape through the geotextile. This paper presents a field test result of a geotextile tube in the land reclamation project for the Songdo New City construction site. The dredged silty clay was dredged by the dredging ship and hydraulically pumped into the geotextile tube. The height of geotextile tube was measured at every filling stage and also measured width and diameter of geotextile tube with the elapsed time. Based on the test results, if the clayey filling material is used, the pumping step must be divided 3~4 stages for drainage and sediment. After complete drainage, the height of the geotextile tube reduces by approximately 50%.