• 지구물리와물리탐사
• /
• 제12권4호
• /
• pp.309-315
• /
• 2009

물리탐사 자료의 복합해석은 탐사 대상체에 대해 단일자료 해석보다 신뢰도가 높은 정보를 제공할 수 있다는 점에서 지속적으로 적용되고 있다. 특히, 지구통계학적 복합해석은 탐사 자료의 물성 뿐만 아니라 공간적 특성을 확률적으로 다룰 수 있다는 점과 탐사자료의 복합과정이 명확하다는 장점을 가지고 있다. 본 연구에서는 물리탐사 자료의 복합해석을 위해 기존에 개발된 지구통계학적 역산 기법을 확장하여, 다중 탐사 자료가 같은 위치에 존재하지 않는 경우의 해석 방안을 제시하였다. 각 탐사자료의 크리깅 분산은 측정 자료의 공간적 배치에 의존한다. 즉, 측정 자료가 가까울수록 분산값은 작아지며 반대의 경우 그 값은 커진다. 다중 물리탐사 자료를 이용하여 임의의 지점에서 물성을 추정할 때, 이러한 공간적 특성을 가중값으로 반영하여 지구통계학적 역산에 의한 해석을 수행하였다. 이 방법을 이용하여 서로 다른 위치에서 다른 탐사 방법으로 측정한 자료를 복합적으로 해석할 수 있는 객관적인 절차를 제공하게 된다.

• 한국지구과학회지
• /
• 제26권5호
• /
• pp.429-435
• /
• 2005

물리탐사와 시추자료에 대해 지구통계학적 복합해석 기술을 적용하여 3차원의 암반등급 해석을 수행하였다. 자료 복합 해석을 위한 다양한 지구통계학적 기술 중에서, 본 연구에서는 물리탐사 자료의 값을 추정하고자 하는 지점의 암반등급의 평균치로 치환하는 국소 변이 평균에 의한 단순 크리깅 기술(Simple Kriging with local varying means)을 사용하였다. 암석의 전기비저항 값은 RMR(Rock Mass Rating)값과 양의 상관관계를 갖는 것으로 알려져 있으나 상관 관계 만에 의한 대응방식은 그 양상이 매우 복잡하고 공간적으로 연관되어 있는 경우가 많아 단순히 적용하기 어려운 경우가 많다. 본 연구에서는 전기비저항과 RMR의 일반적 선형 상관관계 외에 지시자 변환(indicator transform)에 의한 비선형 상관관계를 유도하는 방식을 제안하였다. 또한 본 연구에서는 선형 및 비선형 상관관계에 의해 대응된 비저항 값이 실제 RMR과 비교할 때 나타나는 잔차(residual)에 대해 3차원 지구통계학적 분석을 적용하여 이 결과를 상관관계 결과에 추가함으로써 공간적 특성을 반영하는 RMR 평가를 수행할 수 있었다. 사용된 물리탐사 자료는 전기비저항 및 MT(Magnetotelluric) 탐사 자료이며, 총 10공의 시추자료를 통해 획득한 암반등급 값을 이용하였다. 이와 같은 해석은 조사 대상에 대한 광역적 지질조건을 보다 현실적으로 반영하는 암반등급 분포를 만들어내는 것으로 보인다.

• 지구물리와물리탐사
• /
• 제8권1호
• /
• pp.112-117
• /
• 2005

물리검층은 석탄광 탐사에 일상적으로 적용된다. 현재 검층의 주요 적용 목적은 탄층의 심도 탐지와 탄질, 층서 및 암반강도의 정성적 추정이다. 그러나 만약 정량적 해석이 이루어진다면 더 많은 정보가 얻어질 수 있는데, 정량적 해석의 이해를 돕기 위해, 검층 반응을 Sydney Basin과 Bowen Basin의 호주산 검은 석탄(black coal) 광산지역에서 흔히 발견되는 쇄설퇴적암의 광물조성에 따라 논의하였으며, 검층 반응은 충분한 신뢰도로 광물조성에 대비될 수 있음을 알았다. 해석의 모호성은 만약 모든 종류의 검층자료가 있다면 더 잘 해결될 수 있을 것이다. 음파검층에서 측정된 속도와 계산값을 비교함으로써 일관성을 검토하는 방법 또한 서술하였다. 정량해석의 중요한 목적은 지질공학적 특성화이며, 이 논문에서는 물리검층으로부터 유추될 수 있는 물리적 성질을 고려한 쇄설암의 분류 시스템을 제안하였다.

• 지질공학
• /
• 제31권3호
• /
• pp.269-281
• /
• 2021

Land creeping is the imperceptibly slow, steady, downward movement o f slope-forming soil or rock. Because creep-related failures occur frequently on a large scale without notice, they can be hazardous to both property and human life. Korea Forest Service has operated the prevention and response system from land creeping which has been on the rise since 2018. We categorized and proposed three survey steps (e.g., preliminary, regional, detailed) for investigation of creeping susceptibility site with a focus on geophysical mapping of a selected test site, Yongheung-dong, Pohang, Korea. The combination of geophysical (dipole-dipole electrical resistivity tomography and reciprocal seismic refraction technique, well-logging), geotechnical studies (standard penetrating test, laboratory tests), field mapping (tension cracks, uplift, fault), and comprehensive interpretation of their results provided the reliable information of the subsurface structures including the failure surface. To further investigate the subsurface structure including the sliding zone, we performed high-resolution geophysical mapping in addition to the regional survey. High-resolution seismic velocity structures are employed for stability analysis because they provided more simplified layers of weathering rock, soft rock, and hard rock. Curved slip plane of the land creeping is effectively delineated with a shape of downslope sliding and upward pushing at the apex of high resistive bedrock in high-resolution electrical resistivity model with clay-mineral contents taken into account. Proposed survey steps and comprehensive interpretation schemes of the results from geological, geophysical, and geotechnical data should be effective for data sets collected in a similar environment to land-creeping susceptibility area.

• 지구물리와물리탐사
• /
• 제27권1호
• /
• pp.69-83
• /
• 2024

사용후핵연료 심층처분 부지조사는 그 중요성과 특수성을 고려할 때, 터널, 교량 등과 같은 일반적인 지반조사와는 달리 높은 수준의 품질관리가 요구된다. 본 논문에서는 단계별 부지조사에 적용할 물리탐사 기법을 선정하고, 탐사방법별 물리탐사 수행지침서를 작성한 사례를 소개하고자 한다. 물리탐사 수행지침서는 탐사계획, 자료획득, 자료처리 및 해석의 수행 절차와 고려사항 및 품질관리에 대한 내용이 포함되어 있으며, 이 중 항공전자탐사와 탄성파 반사법탐사 내용을 간략히 정리하였다.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2003년도 Proceedings of the international symposium on the fusion technology
• /
• pp.410-415
• /
• 2003

Ground subsidence has occurred in the downtown of Muan-eup in Korea. Integrated geophysical survey, including two-dimensional resistivity, CSMT(Controlled source magnetotelluric), magnetic, borehole logging, GPR and resistivity tomography, has been conducted to investigate the cause of subsidence and ground conditions. Since the target area is in the city downtown, there were no spaces for surface geophysical methods. To get regional geology and to facilitate the detailed geophysical interpretation in the survey area, two-dimensional resistivity, CSMT and magnetic surveys have been applied in the outer region of the downtown. From these results, we could accurately define the Gwangju fault system and estimate the geologic conditions in the downtown. For the detailed survey of the downtown area, resistivity tomography and borehole logging data have been acquired using a few tens of densely located boreholes. Among these survey results, borehole logging data provided the guide to classification of the rock type and we could define the geologic boundary of granite and limestone formations. From the resistivity tomograms of 42 sections, which are densely located enough to be interpreted in a three-dimensional manner, we could delineate the possible weak zones or cavities in the limestone formations. In particular, resistivity tomograms in the subsided area showed the real image of ground subsidence. The map of hazardous zone has been derived from the joint interpretation of these survey results and we could provide the possible reinforcement strategy in this area.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2007년도 특별 심포지엄 논문집
• /
• pp.53-62
• /
• 2007

Preliminary gas hydrate surveys were carried out From 2000 to 2004 in the East Sea. Research results showed the geophysical evidence of gas hydrate existence. In 2005, Gas Hydrate R&D Organization was established and 10 year gas hydrate development program was initiated. In the $1^{st}$ stage of the program from 2005 to 2007, 6,600 L-km 2-D seismic survey was conducted in the $1^{st}$ year 2005, and $400\;km^2$ 3D survey was conducted in the $2^{nd}$ year 2006. Acquired seismic data were processed and seismic section and 3D cube were produced. By geophysical interpretation and velocity analysis, prospective areas were mapped and candidate drilling sites were recommended. For the precise interpretation, velocity was analyzed using AVO method, and BSR signal was analyzed using deconvolution method. For the prospective area, OBS and high-resolution seismic surveys were conducted. This presentation shows the introduction and examples of the research results of the geophysical methods applied for the gas hydrate exploration in the East Sea.

• 지구물리와물리탐사
• /
• 제2권2호
• /
• pp.112-121
• /
• 1999

This article reviews the development of geophysical inverse theory. In a series of articles published in 1967, 1968, and 1979, G. Backus and F. Gilbert a trade-off between model resolution and estimation errors in geophysical inverse problems, and gave a criterion to compromise the reciprocal relation. Although the criterion was not clear in the physical point of view, it had been extensively used in the interpretation of geophysical date in the 1970s. This was the starting point of the fruitful development of inverse theory in geophysics. A reasonable criterion to compromise the reciprocal relation was derived to solve linear problems by D. D. jackson in 1979, introducing the concept of a priori information about unknown model parameters. This Jackson's approach was extended to solve nonlinear problems on the basis o probabilistic approach to the inverse problems formulated by A. Tarantola and B. Vallete in 1982. At the end of 1980s ABIC (Akaike Bayesian Information Criterion) was introduced for selecting a more reasonable model in geophysics. Now the date inversion is regarded as the process of extracting new information from observed data, combining in with a priori information about model parameters, and constructing a more clear image of model.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2003년도 Proceedings of the international symposium on the fusion technology
• /
• pp.340-343
• /
• 2003

This study presents a practical procedure for the Bayesian inversion of geophysical data by Markov chain Monte Carlo (MCMC) sampling and geostatistics. We have applied geostatistical techniques for the acquisition of prior model information, and then the MCMC method was adopted to infer the characteristics of the marginal distributions of model parameters. For the Bayesian inversion of dipole-dipole array resistivity data, we have used the indicator kriging and simulation techniques to generate cumulative density functions from Schlumberger array resistivity data and well logging data, and obtained prior information by cokriging and simulations from covariogram models. The indicator approach makes it possible to incorporate non-parametric information into the probabilistic density function. We have also adopted the MCMC approach, based on Gibbs sampling, to examine the characteristics of a posteriori probability density function and the marginal distribution of each parameter. This approach provides an effective way to treat Bayesian inversion of geophysical data and reduce the non-uniqueness by incorporating various prior information.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2000년도 추계학술대회
• /
• pp.103-106
• /
• 2000

Geophysical data sets from the Chojeong area in the Chungbuk-Do are compositely studied in terms of multi-attribute interpretation for the subsurface mapping of shallow fracture zones, associated with groundwater reservoir. Utilizing a GIS software, the attribute data are implemented to a database; a lineament from the satellite image, electrical resistivities and its standard deviation, radioactivity, seismic velocity, bedrock depth from exploration data. In an attempt to interpret 1-D electrical sounding data in 2-D and 3-D views, 2-D resistivities structures are firstly made by interpolating 1-D plots. Reconstruction of a resistivity volume is found to be an effective scheme for subsurface mapping of shallow fracture zones. Shallow fracture zones in the southeastern part of the study area are commonly correlated in the various exploration data.