• 복식
• /
• 제62권7호
• /
• pp.67-78
• /
• 2012

This study considered and analyzed the influence of changed clothing silhouettes on the textile patterns by investigating the changes of geometry patterns in response to the changes of western women's apparel silhouette in the 1960s. The period scope of research was limited to the 1960s, and the research object was set as the geometry patterns seen in the designer's high-fashion. The researcher investigated the clothing silhouette and the textile patterns in 1960s by reviewing the literature about domestic and foreign books, research papers, domestic and foreign fashion magazines, information on the Internet. For the western women's apparel in 1960s, some active, simple styles were popular under the social atmosphere when more women actively entered the society. Influenced by popular art trends at that time, the silhouette was expressed in the geometry pattern among many textile patterns. The geometry pattern either appeared as a regularly overall repeating geometry pattern and the regularly partial repeating geometry pattern. The regularly overall repeating geometry pattern arranged the straight lines in the same interval. But the regularly partial repeating geometry pattern was arranged without order to emphasize the motif in some parts of clothing or to give some ornament effect, or was arranged asymmetrically.

• 한국수학사학회지
• /
• 제21권4호
• /
• pp.105-126
• /
• 2008

본 논문은 교양교육과 수학교육에 필수적인 교과로 여겨오던 학교기하가 20세기 초부터 한 세기 동안 학문적 경향과 사회적 변화에 따라 어떻게 변천되어 왔는가를 역사적으로 개관하고 21세기 기하교육과정의 방향을 조망하였다. 21세기 CAD 등 컴퓨터 소프트웨어와 로봇산업 등은 직업과 전문분야에서 기하의 역할과 학교기하의 지식이나 기능도 바꾸고 있다. 응용과 모델링 측면 강화, 추론과 문제해결 영역확대, 디자인과 관련된 요소 강화로 요약되는 21세기 기하교육 방향에서 우리나라 중등학교 기하교육에 시사점을 찾고자 하였다.

• 한국자기공명학회논문지
• /
• 제19권3호
• /
• pp.119-123
• /
• 2015

The thermodynamic properties and structural geometry of $KMgCl_3{\cdot}6H_2O$ were investigated using thermogravimetric analysis, differential scanning calorimetry, and nuclear magnetic resonance. The initial mass loss occurs around 351 K ($=T_d$), which is interpreted as the onset of partial thermal decomposition. Phase transition temperatures were found at 435 K ($=T_{C1}$) and 481 K ($=T_{C2}$). The temperature dependences of the spin-lattice relaxation time $T_1$ for the $^1H$ nucleus changes abruptly near $T_{C1}$. These changes are associated with changes in the geometry of the arrangement of octahedral water molecules.

• Coupled systems mechanics
• /
• 제11권2호
• /
• pp.133-149
• /
• 2022

The accurate prediction of elastoplasticity under prescribed workloads is essential in the optimization of engineering structures. Mechanical experiments are carried out with the goal of obtaining reliable sets of material parameters for a chosen constitutive law via inverse identification. In this work, two sample geometries made of high strength steel plates were evaluated to determine the optimal configuration for the identification of Ludwik's nonlinear isotropic hardening law. Finite element model updating(FEMU) was used to calibrate the material parameters. FEMU computes the parameter changes based on the Hessian matrix, and the sensitivity fields that report changes of computed fields with respect to material parameter changes. A sensitivity analysis was performed to determine the influence of the sample geometry on parameter identifiability. It was concluded that the sample with thinned gauge region with a large curvature radius provided more reliable material parameters.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1780-1783
• /
• 2003

Burrs formed in micro drilling with Ø 1.0 and 0.5 are observed. The changes of burr geometry are compared when feed rate and velocity changes. Characteristics of burr formation in 4 different workpiece materials are analyzed. The coefficient of burr geometry, CB is introduced to classify burrs according to burr height and burr types. Finally control charts are produced using the coefficient of burr geometry and burr types in each workpiece material. Data base is constructed to be used for burr expert system.

• 한국전산구조공학회논문집
• /
• 제30권2호
• /
• pp.103-110
• /
• 2017

본 논문에서는 StrAuto를 이용하여 구조물의 형상 변경을 통한 대안을 생성하고, 이에 대한 최적화를 수행하는 과정을 상세하게 다루었다. 비정형 대공간 전시장 구조물을 대상으로 전체 형상을 파라메트릭하게 디자인하고, 가장 폭이 넓은 경간의 구조 형상을 변경하면서 물량 변화를 관측하여 최적안을 도출하였다. 기존 연구들에서는 형상 변경의 제약 때문에 대부분 단면과 물성을 통한 최적화를 수행하는데 그쳤으나, 본 연구에서는 형상 변경이 가능한 부분을 찾아내어 StrAuto의 가장 핵심적인 능력인 형상 변경을 통한 최적화를 수행했다는 점에서 중요한 의미를 지닌다. 형상 변경으로 충분한 여유를 확보하고 단면 최적화로 물량을 줄이는 프로세스를 통해, 대공간 구조물의 일부만을 대상으로 하면서도 전체 물량의 11.7%를 줄일 수 있었다.

• 한국안광학회지
• /
• 제18권1호
• /
• pp.75-84
• /
• 2013

목적: 연령에 따라 역기하콘택트렌즈(reverse geometry contact lens), MC렌즈(myopia control lens)를 착용 한 후 근시진행억제 효과에 대한 굴절교정값의 변화를 단초점렌즈(single vision lens)와 비교해 알아보고자 한다. 방법: 6세에서 15세 사이의 아동에게 역기하콘택트렌즈 57안, MC렌즈 56안, 단초점렌즈 78안을 각각 착용시킨 후 연령에 따라 Group 1은 10세 이하, Group 2는 11세에서 15세 이하, Group 3은 연구 대상을 모두 포함하여 3그룹으로 나눴다. 이를 바탕으로 12개월 이하, 13~24개월, 25~36개월 까지 굴절교정값의 변화를 통한 근시 진행 억제 효과를 알아보고 통계적 유의성을 검증하고자 하였다. 결과: 착용기간에 따른 굴절교정값의 변화는 Group 3에서 12개월 이하에서는 역기하콘택트렌즈를 착용한 아동에서 변화가 없었고, MC렌즈는 $-0.36{\pm}0.10$ D, 단초점렌즈는 $-0.67{\pm}0.52$ D가 유의하게 변화되었다(P<0.05). 13~24개월에서 역기하콘택트렌즈는 $0.18{\pm}0.49$ D, MC렌즈는 $0.60{\pm}0.42$ D, 단 초점렌즈는 $1.37{\pm}0.72$ D로 유의(P<0.05)하게 변화되었다. 25~36개월에서 역기하콘택트렌즈는 $0.29{\pm}0.61$ D, MC렌즈는 $0.93{\pm}0.57$ D, 단초점렌즈는 $1.72{\pm}0.78$ D로 유의(P<0.05)하게 변화되었다. Group 1에서는 36개월 까지 역기 하콘택트렌즈는 $0.29{\pm}0.73$ D로 MC렌즈는 $1.07{\pm}0.59$ D로 단초점 렌즈는 $1.75{\pm}0.74$ D로 유의(P<0.05)하게 증가하였으며 Group 2에서는 36개월 까지 역기하콘택트렌즈는 $0.28{\pm}0.42$ D로 MC렌즈는 $0.75{\pm}0.49$ D로 단초점 렌즈는 $1.70{\pm}0.84$ D로 유의(P<0.05)하게 증가하여 굴절교정값의 변화는 10세 이하가 11세 이상보다 유의(P<0.05)하게 큰 것으로 나타났다. 결론: 본 연구 결과 12개월 이하의 착용시 역기하콘택트렌즈는 모든 연령에서 굴절교정값의 변화가 없었고, MC렌즈는 모든 연령에서 단초점렌즈보다 더 낮은 시력변화폭을 나타내 근시진행의 억제효과가 있으며, 13~36개월 착용시 역기하콘택트렌즈와 MC렌즈는 모든 연령에서 단초점렌즈보다 낮은 시력변화를 보여 근시진행의 억제효과가 있는 것으로 사료된다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 추계학술대회 논문집
• /
• pp.1090-1095
• /
• 2008

Track geometry changes by traffic loads. The bigger the changes are, the worse the riding comfort and running stability of train. This is so-called track irregularity and is the most important quality parameters of ballasted track. To objectively assess track irregularity, track geometry should be able to be measured. Practically, railway companies use moving chord method, which determine versine values via a chord. The versine is the vertical distance to curve measured in the middle of the chord. This type of method measures only versine of track irregularity curve by transfer function from the characteristics of measuring device. In this report, review the characteristics of two types of measuring tools by comparing the measurements. The one is GRP-1000 system, optical surveying system with Total station and lazar prism trolley. This calculates track geometry by surveying absolute coordinates of two points each on both rail heads. The other is EM-120, measures versine with 10m of symmetrical chord length.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.1647-1652
• /
• 2008

Track geometry consists of tangent and curved lines, which caused undesirable changes in initial track geometry by traffic loads. The bigger the changes are, the worse the riding comfort and running stability of train. This is so-called track irregularity and is the most important quality parameters of ballasted track. To be able to objectively assess track irregularity, track geometry should be able to be measured. Practically, railway companies use moving chord method, this method determine versine values via a chord. The versine is the vertical distance to curve measured in the middle of the chord. This type of method measures only versine of track irregularity curve by transfer function from specific property of measuring tool. In this report, review the characteristics of two types of measuring tools by comparing the measurements. The one is GRP-1000 system, optical surveying system with Total station and lazar prism trolly. This calculates track geometry by surveying absolute coordinates of two points each on both rail heads. The other is Trackmaster, measures versine with 2m of chord length.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2002년도 proceedings of the second asia international conference on tribology
• /
• pp.251-252
• /
• 2002

An algorithm has been developed to determine changes in surface topography on asperity level. The software stitches small but detailed images together to create one large image. If such an image is made before and after an experiment, their difference shows a direct 3D view of the changes in micro-geometry, rather than a change in surface parameters. The algorithm is described in detail and illustrated using artificial as well as real surfaces.