• 한국음향학회지
• /
• 제23권2호
• /
• pp.109-116
• /
• 2004

본 논문에서는 수중 환경에 Y자형으로 배치된 3조의 수동 선배열 소나 (Passive linear may sonars) 센서의 정보 연관 기법에 대해서 다룬다. 3조의 PLAS의 정보 연관은 NP-Hard로 알려진 3차원 할당 문제로 변형된다. 일반적인 수동 센서의 경우 기존의 접근 방법을 이용할수 있지만 방위 정보에 자우 불확실성 (Bearing ambiguity)이 존재하는PLAS에서는 개선된 방법이 필요하다. 특히 본 논문에서는 주파수 정보를 통한 가중치를 이용하여 방위 오차에 강인한 정보 연관 기법을 제안하였으며 PLAS와 표적간의 기하학적인 관계에 따른 ghost 문제 발생 영역을 분석하였다. 다중 표적 환경에서의 모의 실험을 통해 개선된 방법의 정보 연관 성능에 대해 알아보았다.

• 한국음향학회지
• /
• 제16권3호
• /
• pp.51-56
• /
• 1997

본 논문에서는 SLAM(Scanning Laser Acoustic Microscope) 시스템을 이용하여 고체 내부에 발생한 크랙의 깊이를 측정하는 방법을 연구하였다. SLAM 시스템은 초음파의 투과계수에 따른 그림자 영상을 재생시키므로 크랙 깊이에 대한 정확한 측정방법이 요구된다. 이를 위하여 시료에 초음파를 사각으로 입사시켜 얻은 SLAM 영상의 그림자영역과 시료내의 초음파 모드 변환에 대한 기하학적 구조를 이용하여 크랙의 깊이를 측정할 수 있는 방법을 제안하고 실험을 통하여 확인하였다. 실험을 위하여 알루미늄에 서로 다른 깊이로 수직형 라인-크랙의 결함을 갖는 시료를 가공하였고 시료에 초음파를 사각 입사시키기 위하여 20$^{\circ}$ 각도로 웨지를 제작하였다. 실험 결과, 크랙의 깊이가 증가할수록 SLAM 영상의 그림자 영역이 비례적으로 증가함을 보였고, 결함의 깊이에 대한 측정치와 실제치를 비교한 결과 약 6% 이하의 측정오차를 보였다.

• 대한기계학회논문집A
• /
• 제20권11호
• /
• pp.3387-3397
• /
• 1996

The Hub is an auto mobile component used as aircon clutch. The important aspects in cold forging of the Hub with complex geometry are the design of an initial shape of the workpiece, the possibility of the forming by one-stage operation and the determination of number of performs, etc. Based on the systematic procedure of process sequence design, in this paper, the forming operation of cold forged part of the Hub is designed by the rigid-plastic finite element method. The two design criterion of geometrical filling without defect and an even distribution of effective strain in final product are investigated in controlling the initial shape of the workpiece and preform configuration. It is noted that one preforming operation is required in order to obtain final product of the Hub.

• International Journal of CAD/CAM
• /
• 제3권1_2호
• /
• pp.19-29
• /
• 2003

Disassembly is a fundamental process needed for component reuse and material recycling in all assembled products. Integral attachments, also known as 'snap' fits, are favored fastening means in design for assembly (DFA) methodologies, but not necessarily a favored choice for design for disassembly. In this paper, design methods of a new class of integral attachments are proposed, where the snapped joints can be disengaged by the application of localized heat sources. The design problem of reversible integral attachments is posed as the design of compliant mechanisms actuated with localized thermal expansion of materials. Topology optimization technique is utilized to obtain conceptual layout of snap-fit mechanisms that realizes a desired deformation of snapped features for joint release. Two design approaches are attempted and design results of each approach are presented, where the geometrical configuration extracted from optimal topologies are simplified to enhance the manufacturability for the conventional injection molding technologies. To maximize the magnitude of deformation, a design scheme has been proposed to include boundary conditions as design variables. Final designs are verified using commercial software for finite element analysis.

• Biomolecules & Therapeutics
• /
• 제2권1호
• /
• pp.34-38
• /
• 1994

In order to investigate the structure-activity relationships of the stereoisomers of angiotensin converting enzyme inhibitors, captopril and its derivatives were selected as model compounds. In vitro enzymatic activities of them depend on the symmetry at the asymmetric carbons. Especially, the alanyl carbon should have the S configuration to be biologically active. But the demethylated captopril having the achiral carbon also shows the activity although it is less active than captopril. Seven stereoisomers of captopril and its derivatives were chosen and their acidic and ionic forms were used for molecular dynamics simulations. Four computer simulations were practiced for each model compound in order to obtain the good condition for simulation to explain the experimental structure-activity relationships. From the computer simulation results, relativistic movements of three well-known pharmacophoric sites, carboxylate carbon, carbonyl oxygen, and sulfur atoms, were analyzed. Good results were obtained from the aqueous solution molecular dynamics simulation with ionic forms of model compounds. Active model compounds have the pharmacophoric areas of 6.08 to 6.38 $\AA$$^2$and the similarity in the geometrical data. But inactive ones have the largely deviated values of 4.51 to 4.87 $\AA$$^2$from those of active ones.

• Structural Engineering and Mechanics
• /
• 제67권3호
• /
• pp.277-281
• /
• 2018

The analytical solution of two functionally graded layers with Volterra type screw dislocation is investigated under anti-plane shear impact loading. The energy dissipation of FGM layers is modeled by viscous damping and the properties of the materials are assumed to change exponentially along the thickness of the layers. In this study, the rate of gradual change ofshear moduli, mass density and damping constant are assumed to be same. At first, the stress fields in the interface of the FGM layers are derived by using a single dislocation. Then, by determining a distributed dislocation density on the crack surface and by using the Fourier and Laplace integral transforms, the problem are reduce to a system ofsingular integral equations with simple Cauchy kernel. The dynamic stress intensity factors are determined by numerical Laplace inversion and the distributed dislocation technique. Finally, various examples are provided to investigate the effects of the geometrical parameters, material properties, viscous damping and cracks configuration on the dynamic fracture behavior of the interacting cracks.

• International Journal of Aeronautical and Space Sciences
• /
• 제4권1호
• /
• pp.26-33
• /
• 2003

Recess is a geometrical configuration shape that the exit surface of an inner injector is located at a certain length inward from that of an outer injector. It is known to have the characteristics that it can augment mixing efficiency and flame stabilization through internal mixing of propellant in it. So, various experiments, such as backlit stroboscopic photography, phase Doppler particle analyzer(PDPA) and mechanical patternator, were performed at several recess lengths to grasp its effect on the spray characteristics of spray angle, breakup length, atomization and' mixing. Recess length was normalized to dimensionless recess number and two principal mechanisms of impingement and swirl recovery were introduced to explain its influence on the spray characteristics. The effect of recess on SMD doesn't appear significantly near the recess number where mixing efficiency attains to the maximum, whereas mass distribution and mixing efficiency are changed considerably. Thus, it can be inferred that a certain optimum recess number exists, where mixing efficiency becomes the maximum.

• 한국가구학회지
• /
• 제25권3호
• /
• pp.165-172
• /
• 2014

3D form study is one of basic subjects in industrial design education. There are an array of textbooks of visual art, design and architecture, most of which address basic geometrical form study and abstract forms. With the introduction of computerization, current trends are directed to reduce basic form education and students' participation in classes and their accomplishments. This study was intended to develop works under a theme of furniture design with concrete shapes and functions. This study focused on developing relevant process by fusing 3D form study and furniture design which fall into basic design and design studio subjects, respectively. Among 3D form studies, applied were a concept of 3D configuration that explores the relations between surface forms and 3D forms. Furniture design is a challenge to students at beginner or intermediate level in basic design education from initial devising stage to production in kind. To ease high level of difficulties at designing and producing stages, technical education was systematized in the process of conceptualizing, developing idea and production. This type of challenge was carried out during separate semesters, along with a case study done to develop different types of challenges. This study helped students to be motivated and actively participate in classes and well perform advanced form study and technical training from design to actual production.

• 한국전산구조공학회논문집
• /
• 제24권4호
• /
• pp.375-382
• /
• 2011

최근 컴퓨터 그래픽 S/W는 변수화 모델링과 생성알고리즘을 제공함으로써 기하학적 표현의 다양성뿐만 아니라 설계자의 의도를 체계적으로 모듈화할 수 있는 여러 가지 가능성을 열어주고 있다. 이 연구에서는 이러한 가능성을 지닌 컴퓨터 그래픽 S/W기반으로 초기 구조형태를 생성하는 방법을 제시하고자 한다. 특히 변수화 모델링과 생성 알고리즘을 이용하여 다양한 설계대안을 생성한다. 더욱이 동적 그래픽스개념을 이용하여 설계자가 한편에서는 구조형태를 생성하는 동안에, 또 다른 한편에서는 상응하는 힘의 흐름도가 마련되도록 한다. 이는 궁극적으로 힘의 흐름에 근거한 합리적 초기 구조형태 설계를 지원하게 될 것이다.

• Structural Engineering and Mechanics
• /
• 제15권1호
• /
• pp.39-52
• /
• 2003

A computer program has been developed for the optimum design of prestressed concrete beams under flexure. Optimum values of prestressing force, tendon configuration, and cross-sectional dimensions are determined subject to constraints on the design variables and stresses. 28 constraints have been used including flexural stresses, cover requirement, the aspect ratios for top and bottom flanges and web part of a beam and ultimate moment. The objective function contains cost of concrete, prestressing force and formwork. Using this function, it is possible to obtain minimum cost design, minimum weight or cross-sectional area of concrete design and minimum prestressing force design. Besides the idealized I-shaped cross-section, which is widely used in literature, a general I-shaped cross-section with eight geometrical design variables are used here. Four examples, one of which is available in the literature and the others are modified form of it, have been solved for minimum cost and minimum cross-sectional area designs and the results are compared. The computer program, which employs modified grid search optimization method, can assist a designer in producing efficient designs rapidly and easily. Considerable savings in computational work are thus made possible.