• 한국콘텐츠학회논문지
• /
• 제10권10호
• /
• pp.172-179
• /
• 2010

물질에 대한 본질과 그 안에 내재된 시지각적 구조에 대한 관심으로부터 시작된 본 작품연구의 목적은 분자의 형태상 특징인 원, 선과 같은 단순기하형을 시공간에서 입체화시켜 이들 간의 결합이 갖은 조형적 연속성을 표현하는데 있다. 이와 같은 목적으로 현대미술에서의 기하형태는 무엇이며, 분자구조의 구조적 결합과 상징성이 어떠하였는가를 살펴보았으며, 이러한 고찰을 바탕으로 분자구조의 단순기하형태를 입체화시켜 단위체간의 반복적인 결합에서 오는 연속적인 조형성을 표출하였다. 작업의 유형은 분자모형과 전자현미경상에서 보이는 분자를 선을 매개체로 사용하여 단위체를 결합하는 방법과 단위체간을 직접 결합하는 방법으로 신체장신구와 금속조형물을 표현해 보았다. 결국은 단위체간의 직접결합을 통한 "분할과 복제의 연속성" 및 구와 곡선과 같은 분자이미지를 입체화 시킨 단순기하형들의 결합에서 오는 "순환적 연속성"이 공간적 구성에서 발생하는 조형화를 시도해 보았다.

• 한국유체기계학회 논문집
• /
• 제19권2호
• /
• pp.36-42
• /
• 2016

Mass flow amplifier, which is an aerodynamic device, makes air flow increased by ejecting small amount of compressed air with $Coand{\breve{a}}$ effect. In this study, the flow characteristics of a mass flow amplifier were studied with various flow conditions and geometrical configurations. In order to improve the performance of mass flow amplifier, various values of clearance, diffuser angle and the aspect ratio of induced flow inlet to outlet were considered as design parameter. Furthermore, four different pressure conditions of compressed air were also considered. Numerical study was performed using the commercial CFD code, ANSYS CFX 14.5 with shear stress transport(SST) turbulent model. The results of pressure and velocity distributions were graphically depicted with different geometrical configurations and operating conditions.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2006년도 하계학술발표대회 논문집
• /
• pp.1113-1118
• /
• 2006

A numerical investigation of single phase heat and flow characteristics in circular tubes with a single set of spiral micro fins was performed with varying geometrical parameters like fin height, spiral angle, and number of fins. The properties of $40^{\circ}C$ water was used as a working fluid to simulate a condenser and the RNG $k-{\epsilon}$ turbulence model was adopted. Calculation results were obtained in fully developed turbulent flow with constant surface heat flux boundary condition. Relative terms were introduced to investigate the substitution effect of conventional smooth tubes. The dimensionless terms were the heat transfer enhancement factor, the pressure drop penalty factor, and the efficiency index. Additionally, a numerical optimization was carried out to maximize thermal performance with the concept of the robust design. A statistical analysis showed that fin height interacts with number of fins and spiral angle.

• 한국공간구조학회논문집
• /
• 제18권4호
• /
• pp.31-39
• /
• 2018

This paper analyse the mechanical characteristics of geometrical and material nonlinearity behavior of cylindrical shell roofs subjected to a concentrated load. The shell elements were modeled using 'NISA2016' software as 3D general shell element and 3D composite shell element. The 3D shell element includes deformation due to bending, membrane, membrane-bending coupling and shear perpendicular to the grain effects is suited for modeling moderately thick or thin general shells and laminated composite shells. And The 3D composite shell element consists of a number of layers of perfectly bonded anisotropic and orthotropic materials. The purpose of this research is to analysis the load-deflection curves considering the combined geometric and material nonlinearity of cylindrical shells. In a shallowed cylindrical shell, snap-through curve can be found.

• Advances in aircraft and spacecraft science
• /
• 제3권4호
• /
• pp.503-521
• /
• 2016

Variances in turbomachinery blades caused by manufacturing, operation or regeneration can result in modified structural behavior. In this work, the scatter of geometrical and material properties of a turbine blade and its influence on structure performance is discussed. In particular, the vibration characteristics and the lifetime of a turbine blade are evaluated. Geometrical variances of the surface of the blades are described using the principal component analysis. The scatter in material properties is considered by 16 varying material parameters. Maximum vibration amplitudes and the number of load cycles the turbine blade can withstand are analyzed by finite element simulations incorporating probabilistic principles. The probabilistic simulations demonstrate that both geometrical and material variances have a significant influence on the scatter of vibration amplitude and lifetime. Dependencies are quantified and correlations between varied input parameters and the structural performance of the blade are detected.

• 한국실내디자인학회논문집
• /
• 제31호
• /
• pp.12-18
• /
• 2002

This study was performed to construct the spatial systems and shape grammars in architecture based on Froebel's educational idea and building gifts. Especially, it studies on the geometrical principles of Froebel's building gifts and it's types, and then illustrates applied examples about design vocabularies, spatial relations and shape rules of the spatial systems and shape grammars in architecture. The conclusions of this study that starts these purpose are as follows. First, Froebel's educational theory is based on principles and rules which are perceived through the observation of nature, and Froebel's kindergarten method consists of geometrical building gifts and categories of geometrical forms. Second, the characteristics of Froebel's building gifts are mathematical size, proportion, symmetry and the rules of spatial relation. Third, the development to the construction of spatial systems and shape grammars in architecture focus on the vocabularies of architectural elements, and Froebel's building gifts are used for illustration of examples in these formula.

• 한국공간구조학회논문집
• /
• 제15권3호
• /
• pp.43-49
• /
• 2015

A single-layerd steel lattice roof, which has 50m span, was constructed. In order to figure out the realistic buckling load level, the structural analysis of this roof structure was performed especially by local snow load. Due to the characteristics of application of snow load, the load combinations of snow should be considered not only global area but also local part so that the critical buckling load could be observed as easy as possible. Geometrical imperfection was simulated to consider inaccurate shape of structure. And then nonlinear analysis were performed. Finally, this paper could investigate that the local snow load with geometrical imperfection decreased the level of buckling load significantly.

• 대한기계학회논문집B
• /
• 제25권2호
• /
• pp.252-259
• /
• 2001

Computational study has been performed to observe the flow characteristics of combustion chamber for geometrical modification in municipal solid waste incinerator. A series of geometrical modification has been carried out as an attempt to reduce the size of recirculation zone, to obtain uniform flow field in the secondary combustion chamber and to improve the mixing of combustion gas. Two dimensional non-reacting turbulent flow has been studied as the first step to get such goals and the result of design optimization is presented. In addition, three dimensional non-reacting and reacting flow analyses were performed to verify the validity of two dimensional approach.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2012년도 추계학술대회
• /
• pp.881-886
• /
• 2012

The paper is facial expression recognition based on the inclined face geometrical information. In facial expression recognition, mouth has a key role in expressing emotions, in this paper the features is mainly based on the shapes of mouth, followed by eyes and eyebrows. This paper makes its efforts to disperse every feature values via the weighting function and proposes method of expression classification with excellent classification effects; the final recognition model has been constructed.

• 제어로봇시스템학회논문지
• /
• 제16권3호
• /
• pp.277-285
• /
• 2010

This paper describes an approach to analyze geometrical information of building images for understanding outdoor environment of autonomous navigation robot. Line segments and color information are used to classily a building with the other objects such as sky, trees, and roads. The line segments and their two neighboring regions are extracted from detected edges in image. The model of line segment (MLS) consists of color information of neighbor regions. This model rules out the line segments of non-building face. A building face converges into dominant vanishing points (DVPs) which include one vertical point and one of five horizontal points in maximum. The intersection of vertical and horizontal lines creates a facet of building. The geometrical characteristics such as the center coordinates, area, aspect ratio and aligned coexistence are used for extracting the windows in the building facet. In experiments, 150 building faces and 1607 windows were detected from the database of outdoor environment. We found that this result shows 94.46% detection rate. These experimental images were all taken in Ulsan metropolitan city in Korea under difference of viewpoints, daytime, camera system and weather condition.