• 대한수학회보
• /
• 제36권2호
• /
• pp.315-336
• /
• 1999

In the paper [12] we have introduced the new kind of pseudo-einstein ruled real hypersurfaces in complex space forms $M_n(c), c\neq0$, which are foliated by pseudo-Einstein leaves. The purpose of this paper is to give a geometric condition for non-proper pseudo-Einstein ruled real hypersurfaces to be totally geodesic in the sense of Kimura [8] for c> and Ahn, Lee and the present author [1] for c<0.

• 대한수학회보
• /
• 제53권2호
• /
• pp.441-460
• /
• 2016

We introduce the notions of h-v-semi-slant submersions and almost h-v-semi-slant submersions from almost quaternionic Hermitian manifolds onto Riemannian manifolds. We obtain characterizations, investigate the integrability of distributions, the geometry of foliations, and a decomposition theorem. We find a condition for such submersions to be totally geodesic. We also obtain an inequality of a h-v-semi-slant submersion in terms of squared mean curvature, scalar curvature, and h-v-semi-slant angle. Finally, we give examples of such maps.

• International Journal of Fluid Machinery and Systems
• /
• 제6권1호
• /
• pp.25-32
• /
• 2013

Data centers have been built with spread of cloud computing. Further, electric power consumption of it is growing rapidly. High power cooling small-sized fans; high pressure and large flow rate small-sized fan, are used for servers in the data centers and there is a strong demand to increase power of it because of increase of quantity of heat from the servers. Contra-rotating rotors have been adopted for some of high power cooling fans to meet the demand for high power. There is a limitation of space for servers and geometrical restriction for cooling fans because spokes to support fan motors, electrical power cables and so on should be installed in the cooling fans. It is important to clarify complicated internal flow condition and influence of a geometric shape of the cooling fans on performance to achieve high performance of the cooling fans. In the present paper, the performance and the flow condition of the high power contra-rotating small-sized axial fan with a 40mm square casing are shown by experimental and numerical results. Furthermore, influence of the geometrical shape of the small-sized cooling fan on the internal flow condition is clarified and design guideline to improve the performance is discussed.

• 터널과지하공간
• /
• 제15권5호
• /
• pp.330-337
• /
• 2005

전단하중을 받는 암반의 전단특성은 절리면의 구조적인 특징뿐만 아니라 암반 주변의 경계조건에 의해서도 영향을 받는다. 암반블록의 경계조건은 절리면이 받고 있는 응력상태를 기준으로 4가지로 구분할 수 있다. 일반적으로 주로 사용되는 CNL 조건의 전단시험에서 얻어지는 전단강도는 다른 경계조건에서 얻어지는 것보다 낮은 전단강도를 나타내며 그 거동도 다른 것으로 나타났다. 본 연구에서는 일정수직하중(CNL) 시험결과를 정규화한 그래픽 방법을 이용하여 일정수직강성(CNS) 조건의 전단거동을 모사할 수 있었다.

• 지질공학
• /
• 제17권1호
• /
• pp.75-87
• /
• 2007

자연사면에서의 산사태를 평가함에 있어 발생양상과 기하특성을 파악하는 것은 매우 중요하다. 이 연구는 지질을 달리하는 3개지역(장흥, 편마암류; 상주, 화강암류; 포항, 제3기 퇴적암류)에서 발생한 산사태를 대상으로 지질조건에 따른 산사태의 기하양상을 분석하였다. 3개지역에서는 1998년 여름에 $150{\sim}588mm$의 집중호우로 인해 총 1,582개의 산사태가 발생하였다. 이들 산사태를 조사하여 지질조건별 기하특성을 분석하였다. 산사태는 90% 이상의 사면고도에서 발생빈도가 가장 높고 70% 미만의 고도에서는 매우 낮다. 사면경사는 $26{\sim}30^{\circ}$ 범위에서 가장 많이 발생하였고 $20^{\circ}$ 미만에서는 발생빈도가 매우 낮으며 이러한 양상은 지질별로 거의 유사한 경향성을 보였다. 규모는 부피로 보아 수십부터 수백을 넘는 경우도 있으며, 그 길이는 $5{\sim}300m$, 폭은 $3{\sim}50m$로서 좁고 긴 형태이고 깊이는 대부분 1 m 이내로서 매우 얕은 특징을 보였다. 그리고 유형은 기반암의 표면을 파괴면으로 하여 그 상부에 위치한 토층이 미끄러지는 전이형 슬라이드가 주를 이루며, 토석류로 이뤄진 사태물질이 하부사면과 계곡부로 이동되면서 유동성산사태로 변화되는 양상을 보였다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 춘계학술대회 논문집
• /
• pp.924-931
• /
• 2011

This paper deal with maximum span calculation technique for 350km/h high speed catenary system. Considers a geometric interaction, possible maximum span length is between two pole. Wind condition and the train current collector is moving even to being pantograph does not escape while operating. Uses like this justice and possible maximum span length is follow next condition. (i) Operating range of pantograph fan head, (ii) The wind velocity which assumes from system, (iii) Width in pantograph from operation height moving, (iv) Type of processing Catenary system, specially tensile strength of overhead contact wire and messenger wire etc. When accurately calculates the maximum permission span, the dropper between of overhead contact wire and messenger wire and must consider the correlation.

• 로봇학회논문지
• /
• 제6권4호
• /
• pp.308-316
• /
• 2011

This work deals with development of effective redundancy resolution algorithms for the motion control of manipulator. Differently from the typical kinematically redundant robots that are attached to the fixed ground, the ZMP condition should be taken into account in the manipulator motion in order to guarantee the system stability. In this paper, a new motion planning algorithm for redundant manipulator not fixed to the ground is introduced. A sequential redundancy resolution algorithm is proposed, which ensures the ZMP (Zero Moment Point) stability, the planned operational motion, and additional sub-criteria such as joint limit index. A geometric constraint equation derived by reshaping the existing ZMP equation enables one to employ the sequential redundancy algorithm. The feasibility of the proposed algorithm is verified by simulating a redundant manipulator model.

• 한국전산구조공학회논문집
• /
• 제12권3호
• /
• pp.495-508
• /
• 1999

변형된 라이저의 단위 접선벡터상의 운동학적 제약조건을 적용하여 심해저 라이저의 비선형 동적해석을 행한다. 이 조건의 적용으로 자유도수를 감소시킬 수 있으며 심한 비선형성으로 인한 해의 발산 가능성을 제거할 수 있다. 라이저의 거대변형으로 인한 기하학적 비선형성과 비선형 경계조건이 고려된다. 또한, 비선형성이 포함되는 수동학적 하중이 조류와 파랑에 의해 발생하여 내부에 정상류가 흐르는 라이저관의 외벽에 작용하게 된다. 이 외에도라이저 자체의 축방향 변형조건을 고려한다. Galerkin의 유한요소 근사화와 시간증분자를 적용하여 유한요소에 대한 평형 메트릭스 방정식을 유도하고, 수치해석을 위한 알고리즘을 제안하며 API 보고서의 결과와 비교함으로써 제안된 모델이 검증된다. 또한, 기하학적 비선형성으로 인한 영향을 조사하였다.

• 대한기계학회논문집A
• /
• 제30권4호
• /
• pp.428-434
• /
• 2006

Pulse laser welding of AISI 304 stainless steel plate was simulated to find optimal welding conditions by using commercial finite element code MARC. Due to geometric symmetry, a half model of AISI 304 stainless steel plate was considered and user subroutines were applied to boundary condition for the heat transfer. Material properties such as conductivity, specific heat, mass density and latent heat were given as a function of temperature. A moving heat source was designed on the basis of experimental data. As a result, Nd:YAG laser welding for AISI 304 stainless steel was successfully simulated and it should be useful to determine optimal welding condition.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2009년 춘계학술대회논문집
• /
• pp.116-120
• /
• 2009

A two-dimensional unsteady inviscid flow solver has been developed for the simulation of complex geometric configurations on adaptive Cartesian meshes. Embedded condition was used for boundary condition and a predictor-corrector explicit time marching scheme was used for time-accurate numerical simulation. The Cartesian mesh generator, which was previously developed for steady problem, was used grid generation for unsteady flow. The solver was based on ALE formulation for body motion. For diminishing the effects of cut-cells, the cell merging method was used. Using cell merging method, it was eliminated the CFL constraints. The conservation problem, which is caused cell-type variation around region swept by solid boundary, was also solved using cell merging method. The results are presented for 2D circular cylinder and missile launching problem.