• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.39 no.5
• /
• pp.313-319
• /
• 2021

The national geodetic reference frame of Korea was adopted in 2003, which is referenced to ITRF (International Terrestrial Reference Frame) 2000 at the epoch of January 1, 2002. For precise positioning based on the satellites, it should be thoroughly maintained to the newest global reference frame. Other than plate tectonic motion, there are significant events or changes such as earthquakes, antenna replacement, PSD (Post-Seismic Deformation), seasonal variation etc. We processed three years of GNSS (Global Navigation Satellite System) data(60 NGII CORS stations, 51 IGS core stations) to produce daily solutions minimally constrained to ITRF. From the time series of daily solutions, the sites with unexpected discontinuity were identified to set up an event(mostly antenna replacement). The combined solution with minimum constraints was estimated along with the velocity, the offsets, and the periodic signals. The residuals show that the surrounding environment also affects the time series to a certain degree, thus it should be improved eventually. The transformation parameters to ITRF2014 were calculated with stability and consistency, which means the national geodetic reference frame is properly aligned to the global reference frame.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2007.04a
• /
• pp.43-46
• /
• 2007

This paper focuses on examining and evaluating recent results of the national wide horizontal network adjustment which has carried out with respect to the Korean Geodetic Datum 2002 (KGD2002). To do this, 137 geodetic control points were observed by modem GPS technology. After processing all the observations, their outcomes are compared with ones provided by the national wide network adjustment. Results of GPS network show that RMSE is ${\pm}2.7cm\;and\;{\pm}6.5cm$ in horizontal and vertical component, respectively. On the other hand, ones from comparison with EDM network indicate that RMSE is ${\pm}3.0cm$ in horizontal component.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.12 no.1
• /
• pp.15-24
• /
• 1994

In order to produce a consistent set of coordinates of the Korea Precise Primary Geodetic Network (PPGN) based on Suwon Datum, PPGN survey with the use of EDM had carried out between 1975 and 1993. In this study, data arrangement and rigorous adjustment was carried out to assess the net strength and local weakness and to evaluate the accuracy of PPGN. ss, specification for PPGN survey would be systematically studied and revised to new technology and field conditions. And basic data for redefinition of official coordinates. of 1st and 2nd triangulation points is obtained.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.12 no.1
• /
• pp.69-76
• /
• 1994

In this paper, the characteristics of coordinate transformation between the WGS84 and the Bessel ellipsoids according to the assumed values of the geoidal height on Bessel ellipsoid at the geodetic datum origin of Korea were investigated. For this, based on GPS data of 11 control points in Chungnam and Chungbuk province, the mean shift values between ellipsoids were calculated in each case. The geoidal heights on the Bessel ellipsoid were modelled in the area and the coordinate transformation coefficients were derived, and then the accuracy of the transformed coordinates according to fluctuations in geoidal heights were studied.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.25 no.1
• /
• pp.63-68
• /
• 2007

The computations of an ultra-high degree associated Legendre functions and its first derivative up to degree and order of 10800 are reported. Not only the magnitude of orders for the ultra-high degree calculation is presented but the numerical stability and accuracy of the computed values are described in detail. The accuracy on the order of $10^{-25}\;and\;10^{-15}$ was obtained for the values of Legendre function and the first derivatives of Legendre functions, respectively. The computable highest degree and order of Legendre function in terms of latitudes and the linear relationship between the magnitude of the function with respect to degrees and orders is found. It is expected that the computed Legendre functions contribute in many geodetic and geophysical applications for simulations as well as theoretical verifications.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.4 no.1
• /
• pp.37-42
• /
• 1986

This paper deals with comparison of simultaneous geodetic networks between with geographical coordinates and with plane coordinates. The adjustment computation is performed by variation of coordinates. Provisional values for observation equations are computed by extended Guass mid-latitude formula using, official coordinates ($\varphi,\lambda$) in geographical network abjustment, measurements are reduced to plane by origin scale factor (＝1.0000) Bessel ellipsoid and unit weight are adopted, and geographical coordinates are projected by Guass conformal double projection. The processing results of a test-network by distances yield the average root mean square error of position 6ㆍ2cm for adjustment with $\varphi,\lambda$ and 5.8cm for adjustment with X, Y. RMSE of discrepancy between two methods is 1.7cm. This result conform to required accracy.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.7 no.2
• /
• pp.27-34
• /
• 1989

Geodetic control networks have been used for more than 200 years by peculiar national system, both to establish the size and shape of the earth, and to determine the positions of points on its surface. Junction schemes for the densified geodetic network are proposed to the case whether the accuracy of existing network is known or unknown, in this paper. The concepts of adjustment, under the condition of partial $X^TX$＝min., is applied to densification system. Moreover, the technique of epoch analysis, which is often used in small deformation survey net, is introduced to the national control network for unstable point detection.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.26 no.2
• /
• pp.157-164
• /
• 2008

GPS baseline analysis is a mathematical procedure which estimates a baseline vector from carrier-phase double-differenced observations. Least squares technique is generally applied for the processing and integer ambiguities in the observations should be resolved to obtain maximum accuracy of the solution. In GPS control surveying, after assembling the baseline solutions into a network, adjustment is performed to derive final coordinate sets of unknown points. This paper deals with details of GPS baseline analysis for the $2^{nd}$ order national geodetic network adjustment. After reviewing GPS campaigns carried out by National Geographic Information Institute (NGII) and their observations. technical issues and considerations for the GPS baseline analysis are presented with emphasis of selecting the processing strategies and software. Finally, the analyzed results will be evaluated by examining the close of figures formed by joining the processed baseline vectors.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.7 no.2
• /
• pp.35-43
• /
• 1989

The improvements of highly accurate and dense control networks are major requirements to carry out numerical surveying and a large scale mapping for cadastral renovation. In the most conventional photogrammetric solutions, adjusted control coordinates have been applied to block triangulations. However, this study, imploying real data and those of simulated as well, contributes to a simultaneously combined adjustment. It also contains such photogrammetric as photocoordinates and geodetic observations like distances, angles and hight differences. Its purpose is to introduce the improved results, despite it is not sufficient for the ground network. In addition, through the detection of gross error, more precise observational data can be selected for the better adjustment. All in all, the result of this study can be summarized as follows : First, even if the ground control points are not sufficient nor existed at all, the combination of pbotogrammetric and geodetic observations are improved its accuracy. Secondly, the case #2 is more accurate than that of #3, and the case #7 comes into close to that of #6.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.25 no.5
• /
• pp.465-474
• /
• 2007

This paper focuses on examining and evaluating results of the Korean Geodetic Datum 2002 (KGD2002) of the national horizontal network adjustment. To this end, 137 geodetic control points were independently observed by GPS technology. After processing all the observations, their results were compared with ones derived by the national network adjustment which was recently performed to determine new KGD 2002 coordinate sets over the national geodetic control points. The comparisons results showed that RMSE was ${\pm}2.7cm$ and ${pm}6.5cm$ in horizontal and vertical component in the case of GPS network, whereas RMSE was ${\pm}3.0cm$, in horizontal component in the case of EDM network.