• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 2001.06a
• /
• pp.1161-1161
• /
• 2001

Rapid cost-effective methods of measuring wood quality are extremely important to tree improvement programs where it is necessary to test large numbers of trees. Non-destructive sampling of a forest can be achieved by using increment cores generally removed at breast height. At CSIRO Forestry and Forest Products methods for the rapid, non-destructive measurement of wood properties and wood chemistry based on increment core samples have been developed. In this paper the application of near infrared (NIR) spectroscopy to the prediction of a range solid wood properties, including density, longitudinal modulus of elasticity (E$\sub$L/) and microfibril angle (MFA), is described. Experiments conducted on individual species (Eucalyptus delegatensis and Pinus radiata), the two species combined and a number of mixed species from several genera are reported. NIR spectra were obtained from the radial/longitudinal face of each sample and used to develop calibrations for the measured physical properties. When the individual species were used the relationships between laboratory determined data and NIR fitted data were good in all cases. Coefficients of determination (R$^2$) ranging from 0.77 for MFA to 0.93 for stick density were obtained for E. delegatensis and R$^2$ ranging from 0.68 for MFA to 0.94 for strip density were obtained for P. radiata. The calibration statistics for the combined E. delegatensis and P. radiata samples were similar to those found for the individual species. As these results indicated that it might be possible to produce general calibrations based on samples from a number of species of a single genus or samples from a number of different genera, a wide range of species was subsequently tested. Good relationships were obtained for both density and E$\sub$L/. These calibrations had R$^2$ that were slightly lower than those determined using individual species and standard errors that were higher. The mixed species calibrations, when applied to the E. delegatensis and P. radiata sample sets, provided good estimates of density (stick and strip) and E$\sub$L/. The results demonstrated that a mixed species calibration, that encompasses wide variation in terms of, wood anatomy, chemistry and physical properties, could be used to rank trees. Experiments reported in this paper demonstrate that solid wood properties can be estimated by NIR spectroscopy. The method offers a rapid and non-destructive alternative to traditional methods of analysis and is applicable to large-scale non-destructive forest resource assessment, and to tree breeding and silvicultural programs.

• Journal of Korean Society of Forest Science
• /
• v.62 no.1
• /
• pp.76-81
• /
• 1983

Pedicularis spp. are the alternate hosts of the white pine blister rust fungi in the forests of Korea, and Ribes spp. were found as other alternate hosts by artificial inoculation test. New biotypes (races) with different host selectivity and pathogenicity of the causal fungi were speculated at various places in Korea. The aeciospores of the fungi were collected from two isolated places, Pyeongchang and Namwoen, and artificially inoculated on Pedicularis resupinata and six species of the genus Ribes. Among the tested alternate host species, P. resupinata and R. montigenum were only susceptible to both the Pyeongchang population and the Namwoen population, showing similar pathogencity between the two fungai populations. Three white pine species were planted in fungus-infested stands to study the susceptibility of each tree species. Four years later, 17.7% of Pinus koraiensis and 26.3% of the P. strobus were infected, but P. parviflora was free from attack. From the above results, it was concluded that the white pine blister rust fungus populations in Korea are of the same biotype, with P. koraiensis and P. strobus as aecial hosts, and Pedicularis spp. and Ribes spp. as telial hosts.

• Korean Journal of Environment and Ecology
• /
• v.17 no.3
• /
• pp.201-209
• /
• 2003

This study was carried out to select proper species fur early stage replantation in forest road cut-slope. From one to fifteen years elapsed forest roads in four regional areas of Gyeongsangnam-do and Jeollanam-do, sample plots were selected, and their vegetations and environmental factors were investigated. Invaded species and plant coverage have increased with elapsed years. The occurrence rate of herbs have decreased, while the occurrence of trees have increased with elapsed years. The ordination analysis showed that distribution of species was influenced by the elapsed year, the slope angle of the cut-slope, elevation, and the direction angle of the cut-slope. Dactylis glomerata, Poa pratensis, Amorpha fruticosa, Lespedeza sp., Artemisia princeps var. orientalis, Duchesnea chrysantha, Miscanthus sinensis, Pueraria thunbergiana, Zanthoxylum schinifolium, Rhus chinensis, and Weigela subsessilis were considered as proper species for replantation in forest road cut-slope, besides the species used already. Seventy seven family, 190 genus, 233 species, 38 variety, and 271 species in total were counted as invaded plant species in the survey zone. Naturalized plants were 18 species. Invaded species are, with high frequency first, Rubus crataegifolius, Artemisia princeps var. orientalis, Zanthoxylum schinifolium, Pueraria thunbergiana, Pinus densiflora, Lespedeza maximowiczii, Lysimachia clethroides, Lespedeza bicolor, Youngia denticulata, Miscanthus sinensis, and Erigeron annuus.

• The Korean Journal of Mycology
• /
• v.23 no.1 s.72
• /
• pp.61-70
• /
• 1995

The genus Armillaria is important because they produce Gastrodia tubers. Seventy two isolates of Armillaria were obtained from fruit bodies grown on decayed wood in Korea. Twenty four isolates from Pinus koraiensis were identified as A. ostoyae. Two isolates from G. elata growing in the field were identified as A. mellea. Seven isolates from Acer ginnala and Quercus spp. were identified as A. tabescens. Thirty nine isolates were identified as A. gallica. Armillaria gallica was isolated from Quercus spp., Ainus japonica, Vitis amurensis and Prunus sargentii. Armillaria spp. isolates were divided into four groups based on the cultural characteristics. Group II (A. gallica KNU-A110) was better than the other groups for mycelial growth and rhizomorph formation. Isolate KNU-A110 proved to be good for production of G. elata tubers. This fungus forms mycelial fan in the plant tissue and rhizomorphs in contact with G. elata tubers. Gastrodia spp. was found in thirteen sites in Kangweon province in Korea. The plants were divided into three different kinds based on stem color. Plants with stems of brownish orange and greyish yellow were identified as G. elata, and those with greyish green colored stems were identified as G. gracilis. Gastrodia was collected mainly from humus soils rich in leaf debris, and slopes facing south from mid-May to mid-July. Once the new tubers are formed from the ancestry tuber, the ancestry tuber begins to decay. The offspring tuber, apparently gaining nutrients through rhizomorphs, begins to grow in length and slowly to enlarge. It takes three years for the offspring tuber to become ancestry tuber.

• Journal of agriculture & life science
• /
• v.46 no.1
• /
• pp.71-81
• /
• 2012

This study was conducted to get basic information about making windbreak forest around Saemanguem reclaimed lands by analyzing the vegetation structure of 8 windbreak forests along the west coast of Korea and considering the methods of structural improvement. The total plants existing in the study areas were 25 families 40genus 43 species, and every tree layer consisted of only one tree species, Pinus thunbergii. There were 2 windbreak stands consisted of a species, and 2 consisted of multiple layer with a species. While, 4 windbreak stands consist of various species with several species. To make ecological system and functions of windbreak forests stabler, TL, STL and SL should be together in the vertical point, moreover, TL should be appeared at the in side and SL should be planted at the out side in the horizontal point. It is considered that mixed stand forest might be suitable for increasing the windbreak forest's functions and decreasing damage caused by disease and insects.

• Journal of the Korean Wood Science and Technology
• /
• v.10 no.3
• /
• pp.96-108
• /
• 1982

Pinus is one of the most important species supplying domestic industrial timbers such as constitutional lumber, pulpwood, and mine props. It occupies nearly 50 percent of the total forest resources in Korea. With above conception, to develop this forest resources and to obtain the basic data on the reasonable and effective utilization of Pinus, this study was carried out. Five species (P. koraiensis S. et Z., P. densiflora S. et Z., P. thunbergii Parlat, P. densiflara far erecta, P. rigida Miller) grown in Kwangnoong experimental forest stand, Chungcheongnam-Do, and Gangwon-Do regions were selected as sample trees. Anatomical, physical, mechanical and chemical properties of them were investigated.

• Journal of Korean Society of Forest Science
• /
• v.29 no.1
• /
• pp.102-114
• /
• 1976

This experiment was conducted to investigate the percentage of fertile seed in terms of crossabilities and relationships of taxonomic affinities for the ${\times}$ P. rigitaeda of interspecific hybrid, ${\times}$ P. rigida rigitaeda and ${\times}$ P. rigitaeda rigida of backcross hybrids, $F_2$ of ${\times}$ P. rigitaeda and natural hybrid of ${\times}$ P. rigitaeda within Sub-genus Diploxylon of the Genus Pinus. The possibility of establishment of hybrid seed orchard and differentia of hybrids for the purpose of extensive program of reforestation in the future have also been investigated. And, the experimental results obtained are summarized as follows: 1. On the basis of crossabilities as well as on the taxonomic affinities according to the systems of Shaw, Pilger and Duffield, it has been proven that the parental species of those hybrids are of close affinities and range of the fertile hybrid seed production rate was as high as 67-87% in the best hybrid combination (Table 6). 2. Those hybrids seemed to be most promising in the growth perfermance exhibiting 28-80% more volume growth compared to the P. rigida with the statistic significance of 1-5% level (Table 7, 8, 9). And all hybrids exhibit cold hardiness as much as P. rigida except $F_1$ hybrid of ${\times}$ P. rigitaeda and it seems to suggest that the characteristics of cold hardiness were transmitted from the P. rigida. 3. With regard to the anatomical characteristics of needle, the hypoderm is biform in most of the hybrid pines and the characteristics of resin canals are medial in all hybrid. And, the fibrovascular bundles are intermediate of both parent in all hybrid. Therefore it was found to be possible to distinguish the hybrids pines from their parents by the needle characteristics (Table 10). 4. It has been demonstrated that the hybrids pines have a phenolic substance (No. 7) of pale yellow at Rf-0.66, same as P. rigida, but no trace of phenolic substance was observed in the P. taeda. This fact will serve as an important criteria for early identification of hybridity in progeny testing (Table 11). 5. It was found to be possible to distinguish by the starch gel electrophoretic variations banding patterns and staining densities of isoperoxidase in the needles of the hybrids pines from their parents (Fig. 1).

• Journal of the Korean Wood Science and Technology
• /
• v.5 no.1
• /
• pp.3-8
• /
• 1977

A bark comprises about 10 to 20 percents of a typical log by volume, and is generally considered as an unwanted residue rather than a potentially valuable resource. As the world has been confronted with decreasing forest resources, natural resources pressure dictate that a bark should be a raw material instead of a waste. The utilization of the largely wasted bark of genus Quercus grown in Korea can be enhanced by learning its anatomical structure and properties. In this paper, bark characteristics of Quercus grown in Korea are described. In bark anatomy, general features such as color of rhytidome, exfoliating form, color of periderm, arrangement of periderm, and thickness of the inner and outer hark. etc., arc discussed. Studies on the microscopic structure include sieve tube, companion cell, parenchyma, pholem fiber, ray, periderm(phelloderm, phelloogen, phellem), sclereid, and crystal, etc. The results may be summarized as follows: 1. In general characteristics of rhytidomes, exfoliating is not easy and sclereids are distint to the naked eye. Inner bark is thicker than that of outer bark except in case of Q. variabilis. 2. It is not clear to distinguish between phelloderm and phellogen in Quercus bark. The phellem is developed conspicuously in Q. variabilis but that of Q. accutissima is composed of thinwalled phellem and thickwalled stone cell. 3. Quercus Bark has sieve tube, companion cell, phloem fiber and sclereid. Sclereids of Quercus bark are the most distinguished characteristics comparing with pinus and populus. The volume percent of sclereids are higher than that of fiber. 4. Rays are 1~3 seriate, and multiseriate ranging with from 15 to 20. 5. Parenchyma cell contains two types, polygonal and druses crystal.