• Asian-Australasian Journal of Animal Sciences
• /
• v.19 no.11
• /
• pp.1536-1540
• /
• 2006

Crossbreeding effects for wool quality traits viz. greasy fleece weight (kg), staple length (cm), average fibre diameter (${\mu}$) and medulation percentage were estimated using the Dickerson's and Kinghorn's models. The data analyzed involved 15 genetic groups including Nali purebred, $F_1$'s of two and three breeds, $F_2$'s and reciprocal crossbred obtained from the crossing of Nali (N), Merino (M) and Corriedale (C) breeds during 1980-96. Nali and Corriedale breeds had non-significant negative additive genetic effects (Dickerson's model) on greasy fleece weight, while effects of Corriedale were negative for staple length only from both models. In general additive genetic effects of all three breeds were non-significant for all the wool traits except medulation percentage. Non significant heterotic and recombination effects (epistatic loss) were estimated from both models. However, the estimates of crossbreeding effects varied between the models both in magnitude as well as in direction barring few exceptions. Undesirable positive heterosis was found on medulation percentage for all types of combinations involving three breeds. Comparison of least squares means of various genetic groups revealed that both two breed and three breed crosses were superior to the Nali breed for all wool quality traits. Fibre diameter of MN crossbreds was significantly less than CN crossbreds. Results also indicated that as the inheritance of Nali breed in a cross is decreased, the medulation percentage decreases which is desirable. Inter se mating of crossbreds (two breed, three breed) has not resulted in a decline in the wool quality traits. These results indicate that the synthetic population derived from three breeds can be stabilized easily for wool traits as there may not be epistatic loss on subsequent inter se mating of crossbreds.

• Journal of Animal Science and Technology
• /
• v.63 no.6
• /
• pp.1211-1222
• /
• 2021

Data of 651 lambs (68 Romanov, 49 Rahmani, 151 [♀1/2 Rahmani × ♂1/2 Romanov) and 383 (♀3/4 Rahmani and 1/4♂ Romanov]) were collected from Mehalet Mousa Farm, belonging to Animal Production Research Institute from the period of 2009 to 2016 to estimate phenotypic and genetic parameters. The traits studied were birth weight (BW), body weight at four week (BW4), body weight at eight weeks (BW8) and body weight at twelve weeks (BW12) or weaning weight. Least squares analysis of variance shows significance of the effects of breed groups, gender of lambs, birth type; month of birth and year of birth on all traits studied. Rahmani lambs had heavier BW, BW4, BW8 and BW12 while Romanov lambs had the lowest ones. The first generation (♀1/2 Rhamani × ♂1/2 Romanov) had heavier body weights than Romanov and the second generation (♀3/4 Rahmani × ♂1/4 Roamnov). Gender of lambs had highly significant effect on body weights. Males were significantly (p < 0.01) heavier than females for all traits studied. Least square means of BW, BW4, BW8 and BW12 for single lambs were 2.69, 10.43, 13.53 and 16.10 kg, respectively. Least square means of BW, BW4, BW8 and BW12 for twin lambs were 2.50, 9.37, 12.5 and 15.16 kg, respectively, while least square means of BW, BW4, BW8 and BW12 for triple lambs were 2.09, 7.86, 10.83 and 13.67 kg, respectively. Estimates of direct heritability measured by single trait animal model were 0.14, 0.23, 0.25 and 0.26 for BW, BW4, BW8 and BW12, respectively, and the corresponding measured by multi trait animal model were 0.17, 0.24, 0.32 and 0.36 for the same traits, respectively. All genetic and phenotypic correlations among different traits studied are positive and significant.

• Mycobiology
• /
• v.49 no.6
• /
• pp.589-598
• /
• 2021

White strains of Hypsizygus marmoreus are more difficult to cultivate than are brown strains; therefore, new white strain breeding strategies are required. Accordingly, we constructed the genetic map of H. marmoreus with 1996 SNP markers on 11 linkage groups (LGs) spanning 1380.49 cM. Prior to analysis, 82 backcrossed strains (HM8 lines) were generated by mating between KMCC03106-31 and the progenies of the F1 hybrid (Hami-18 × KMCC03106-93). Using HM8, the first 23 quantitative trait loci (QTLs) of yield-related traits were detected with high limit of detection (LOD) scores (1.98-9.86). The length, thickness, and hardness of the stipe were colocated on LG 1. Especially, length of stipe and thickness of stipe were highly correlated given that the correlation coefficients were negative (-0.39, p value ≤ .01). And a typical biomodal distribution was observed for lightness of the pileus and the lightness of the pileus trait belonged to the LG 8, as did traits of earliness and mycelial growth in potato dextrose agar (PDA) medium. Therefore, results for color traits can be suggested that color is controlled by a multi-gene of one locus. The yield trait was highly negatively correlated with the traits for thickness of the stipe (-0.45, p value ≤ .01). Based on additive effects, the white strain was confirmed as recessive; however, traits of mycelial growth, lightness, and quality were inherited by backcrossed HM8 lines. This new genetic map, finely mapped QTLs, and the strong selection markers could be used in molecular breeding of H. marmoreus.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.50 no.2
• /
• pp.91-96
• /
• 2005

Proper choice of source populations contributes to the ultimate success of selection for genetic improvement. The source population should possess the most desirable alleles at as many loci as possible for intra population improvement. Such desirable alleles can be intensified by introgression of exotic germ plasm into locally adapted ones through hybridization followed by selection. The objectives of this study were to determine the mean performance, genetic variability $({\sigma}^2G)$ and heritability of fresh ear yield and other important traits within two sweet corn source populations, $BC1-10{\times}Syn-II$ and BC2-10. One hundred selfed progenies from each of the two source populations were evaluated in a $10\times10$ lattice design, at the Institute of Bioscience (IBS) Farm, University of Putra Malaysia (UPM) following the recommended cultural practices. Significant differences among selfed progenies within $BC1-10{\times}Syn-II$ were observed for all traits, while differences among selfed progenies within BC2-10 were noted for fresh ear yield, ear length, ear diameter, number of kernels per row, ear height, days to tasseling and days to silking. Progenies developed from $BC1-10{\times}Syn-II$ population had higher estimates of ${\sigma}^2G$ than did progenies from BC2-10 population for number of kernel rows per ear, total soluble solids, plant height, days to tasseling and days to silking, showing that selection to improve these traits would be more effective in selfed progenies of $BC1-10{\times}Syn-II$ than that in BC2-10. On the other hand, progenies developed from BC2-10 population had higher estimates of ${\sigma}^2G$ for ear length, ear diameter and ear height, indicating that progenies from this population would have better genetic gain than $BC1-10{\times}Syn-II$. Comparable estimates of genetic variance were found for fresh ear yield, and number of kernels per row, indicating that genetic improvement of the two source populations is expected to produce similar genetic gains for these two traits. Therefore, selfed progenies developed from both source populations could be used to improve the two populations for various traits and thereby develop superior genotypes for immediate use in the production system.

• Journal of Animal Science and Technology
• /
• v.52 no.3
• /
• pp.187-190
• /
• 2010

The objective of this study was to estimate genetic parameters for total number of born (TNB), number of born alive (NBA) and teat numbers (TN) of Landrace and Yorkshire breeds in Korean swine population using multiple trait animal model procedures. Total numbers of 4,653 records for teat numbers and 8,907 records for TNB and NBA collected from 2004 to 2008 on imported breeding pigs and their litter size records were used in this study. To find the appropriate model for estimation of genetic parameters (heritabilities and genetic correlations), five statistical models (two models for reproductive traits, two models for teat numbers, one model for combining these traits) considering only direct additive genetic effects, including maternal effects were used and Akaike information criteria (AIC) of each two models for reproductive traits and teat trait were compared. The means and standard deviations of TNB, NBA, and TN were $11.52{\pm}3.34$, $10.55{\pm}2.96$ and $14.30{\pm}0.83$, respectively. Estimated heritabilities for TNB and NBA traits using the model which considered only additive genetic effect were low (0.06 and 0.05, respectively). However, estimated heritabilities considering maternal genetic effects were a little bit higher than that of the model considering only additive genetic effect (0.09 for TNB and NBA, respectively). Estimated heritability for TN using the model which considered only additive genetic effect was 0.40. However, estimated heritability of direct genetic effects from a model considering maternal genetic effect was high (0.60). All results of AIC statistics, the models considering maternal effect was more appropriate than the models considering only additive genetic effect. Genetic correlations of direct additive genetic effect between litter size (TNB, NBA) and teat numbers were low (-0.18 and -0.14, respectively). However, genetic correlations of maternal effect between litter size (TNB, NBA) and teat numbers were a little bit higher than those of direct additive genetic effect (0.08 and 0.16, respectively).

• Asian-Australasian Journal of Animal Sciences
• /
• v.33 no.10
• /
• pp.1558-1565
• /
• 2020

Objective: The objective of this study was to characterize the number of loci affecting growth traits and the distribution of single nucleotide polymorphism (SNP) effects on growth traits, and to understand the genetic architecture for growth traits in Hanwoo (Korean cattle) using genome-wide association study (GWAS), genomic partitioning, and hierarchical Bayesian mixture models. Methods: GWAS: A single-marker regression-based mixed model was used to test the association between SNPs and causal variants. A genotype relationship matrix was fitted as a random effect in this linear mixed model to correct the genetic structure of a sire family. Genomic restricted maximum likelihood and BayesR: A priori information included setting the fixed additive genetic variance to a pre-specified value; the first mixture component was set to zero, the second to 0.0001×σ²_g, the third 0.001×σ²_g, and the fourth to 0.01×σ²_g. BayesR fixed a priori information was not more than 1% of the genetic variance for each of the SNPs affecting the mixed distribution. Results: The GWAS revealed common genomic regions of 2 Mb on bovine chromosome 14 (BTA14) and 3 had a moderate effect that may contain causal variants for body weight at 6, 12, 18, and 24 months. This genomic region explained approximately 10% of the variance against total additive genetic variance and body weight heritability at 12, 18, and 24 months. BayesR identified the exact genomic region containing causal SNPs on BTA14, 3, and 22. However, the genetic variance explained by each chromosome or SNP was estimated to be very small compared to the total additive genetic variance. Causal SNPs for growth trait on BTA14 explained only 0.04% to 0.5% of the genetic variance Conclusion: Segregating mutations have a moderate effect on BTA14, 3, and 19; many other loci with small effects on growth traits at different ages were also identified.

• Genomics & Informatics
• /
• v.20 no.2
• /
• pp.16.1-16.12
• /
• 2022

Various methodologies for the genetic analysis of longitudinal data have been proposed and applied to data from large-scale genome-wide association studies (GWAS) to identify single nucleotide polymorphisms (SNPs) associated with traits of interest and to detect SNP-time interactions. We recently proposed a grid-based Bayesian mixed model for longitudinal genetic data and showed that our Bayesian method increased the statistical power compared to the corresponding univariate method and well detected SNP-time interactions. In this paper, we further analyze longitudinal obesity-related traits such as body mass index, hip circumference, waist circumference, and waist-hip ratio from Korea Association Resource data to evaluate the proposed Bayesian method. We first conducted GWAS analyses of cross-sectional traits and combined the results of GWAS analyses through a meta-analysis based on a trajectory model and a random-effects model. We then applied our Bayesian method to a subset of SNPs selected by meta-analysis to further discover SNPs associated with traits of interest and SNP-time interactions. The proposed Bayesian method identified several novel SNPs associated with longitudinal obesity-related traits, and almost 25% of the identified SNPs had significant p-values for SNP-time interactions.

• Asian-Australasian Journal of Animal Sciences
• /
• v.33 no.7
• /
• pp.1057-1067
• /
• 2020

Objective: This study evaluated the effect of pedigree errors (PEs) on the accuracy of estimated breeding value (EBV) and genetic gain for carcass traits in Korean Hanwoo cattle. Methods: The raw data set was based on the pedigree records of Korean Hanwoo cattle. The animals' information was obtained using Hanwoo registration records from Korean animal improvement association database. The record comprised of 46,704 animals, where the number of the sires used was 1,298 and the dams were 38,366 animals. The traits considered were carcass weight (CWT), eye muscle area (EMA), back fat thickness (BFT), and marbling score (MS). Errors were introduced in the pedigree dataset through randomly assigning sires to all progenies. The error rates substituted were 5%, 10%, 20%, 30%, 40%, 50%, 60%, 70%, and 80%, respectively. A simulation was performed to produce a population of 1,650 animals from the pedigree data. A restricted maximum likelihood based animal model was applied to estimate the EBV, accuracy of the EBV, expected genetic gain, variance components, and heritability (h²) estimates for carcass traits. Correlation of the simulated data under PEs was also estimated using Pearson's method. Results: The results showed that the carcass traits per slaughter year were not consistent. The average CWT, EMA, BFT, and MS were 342.60 kg, 78.76 ㎠, 8.63 mm, and 3.31, respectively. When errors were introduced in the pedigree, the accuracy of EBV, genetic gain and h² of carcass traits was reduced in this study. In addition, the correlation of the simulation was slightly affected under PEs. Conclusion: This study reveals the effect of PEs on the accuracy of EBV and genetic parameters for carcass traits, which provides valuable information for further study in Korean Hanwoo cattle.

• Asian-Australasian Journal of Animal Sciences
• /
• v.30 no.2
• /
• pp.167-170
• /
• 2017

Objective: The feed intake (FI) and feed efficiency are economically important traits in ducks. To obtain insight into this economically important trait, we designed an experiment based on the residual feed intake (RFI) and feed conversion ratio (FCR) of a random population Pekin duck. Methods: Two thousand and twenty pedigreed random population Pekin ducks were established from 90 males mated to 450 females in two hatches. Traits analyzed in the study were body weight at the 42th day (BW42), 15 to 42 days average daily gain (ADG), 15 to 42 days FI, 15 to 42 days FCR, and 15 to 42 days RFI to assess their genetic interrelationships. The genetic parameters for feed efficiency traits were estimated using restricted maximum likelihood (REML) methodology applied to a sire-dam model for all traits using the ASREML software. Results: Estimates heritability of BW42, ADG, FI, FCR, and RFI were 0.39, 0.38, 0.33, 0.38, and 0.41, respectively. The genetic correlation was high between RFI and FI (0.77) and moderate between RFI and FCR (0.54). The genetic correlation was high and moderate between FCR and ADG (-0.80), and between FCR and BW42 (-0.64), and between FCR and FI (0.49), respectively. Conclusion: Thus, selection on RFI was expected to improve feed efficiency, and reduce FI. Selection on RFI thus improves the feed efficiency of animals without impairing their FI and increase growth rate.

• Korean Journal of Agricultural Science
• /
• v.42 no.3
• /
• pp.245-251
• /
• 2015

Records of 490,767 cows collected from 1990 to 2012 by dairy herd milk test of National Agriculture Cooperative Federation The pedigree of dairy cattle were provided by Korea Animal Improvement Association. The data were used to analyze the longevity of dairy cows with the life traits such as days in milk, number of lactation, productive life, and life span. The data were also used to investigate genetic relationship of these longevity traits with profitability of dairy cows, including heritability and genetic correlation. The profitability was calculated with simulation of milk income and production costs for individual cows. Days in milk among the traits had -0.287, -0.572 and -0.536 of genetic correlation with number of lactations, productive life and lifespan, respectively. The heritabilities of life span, number of lactations, productive life, and days in milk were found to be 0.045, 0.047, 0.059 and 0.081, respectively. Genetic correlations of profit with productive life, number of lactations, and days in milk were identified as 0.072, 0.080, 0.098 and 0.101. These results suggested that days in milk was most desirable traits to represent longevity of Holstein dairy cattle. In general, since longevity and profitability were close genetic relationship each other, genetic improvement of longevity is necessary for better profitable cows.