• Korean Journal of Environmental Agriculture
• /
• v.31 no.1
• /
• pp.37-44
• /
• 2012

BACKGROUND: Many edible mushrooms are known to accumulate high levels of heavy metals. This research was focused on health risk assessment to investigate the mushrooms in Korea, arsenic (As), cadmium (Cd), lead (Pb) and mercury (Hg) contaminations in edible mushrooms in cultivated areas were investigated, and health risk was assessed through dietary intake of mushrooms. METHODS AND RESULTS: The heavy metals in mushrooms were analyzed by ICP/MS after acid digestion. Probabilistic health risk were estimated by Monte-Carlo simulation techniques. The average contents of As, Cd, Pb, and Hg were $0.035{\pm}0.042$ mg/kg, $0.017{\pm}0.020$ mg/kg, $0.043{\pm}0.013$ mg/kg, and $0.004{\pm}0.004$ mg/kg, respectively. The results showed that contents of Cd and Pb did not exceed maximum residual levels established by European Uion regulation (Cd 0.20 mg/kg and Pb 0.30 mg/kg). For health risk assessment, estimated intakes in all age populations did not exceed the provisional tolerable daily intake of As and Hg, provisional tolerable monthly intake of Cd, provisional tolerable weekly intake of Pb. The Hazard Index (HI) were ranged from $0.03{\times}10^{-4}{\sim}0.01{\times}10^{-3}$ for As, $0.02{\times}10^{-3}{\sim}0.81{\times}10^{-3}$ for Cd, $0.06{\times}10^{-3}{\sim}0.38{\times}10^{-3}$ for Pb, and $0.08{\times}10^{-4}{\sim}0.14{\times}10^{-3}$ for Hg at general population. CONCLUSION: The HI from the ratio analysis between daily exposure and safety level values was less than 1.0. This results demonstrated that human exposure to heavy metals through dietary intake of mushrooms might not cause adverse effect.

• Journal of Food Hygiene and Safety
• /
• v.35 no.1
• /
• pp.75-82
• /
• 2020

The purpose of this study was to establish optimized extraction conditions for Lilium bulb and Lespedeza cuneata G. Don and to investigate the storage stability of beverages containing extracts. The hot-water extract and the 60% ethanol extract had the highest DPPH radical scavenging activities as well as the highest total polyphenol content. The total polyphenol content, total flavonoid content and DPPH radical scavenging activity were the highest when the Lilium bulb extract was mixed with the Lespedeza cuneata G. Don extract at the ratio of 1:4. Storage stability of beverages was determined during storage at 10, 25, and 35℃ for 6 months. The pH was decreased from 4.15 to 4.01-4.05, while the acidity was increased from 0.60% to 0.70-0.75% after storage for 6 months. The soluble solid contents were not changed during storage of 6 months. The DPPH radical scavenging activity was decreased after 4-6 months. The Hunter b (yellowness) values decreased at 35℃ after storage for 6 months while the lightness (L) and redness (a) were not changed during storage for 6 months. The total saponin content was not remarkably changed during 2 months of storage, while it decreased after 4-6 months of storage. The flavonoid content was decreased 47% and 55% from an intial 21.7 mg/100 mL to 10.3 mg/100 mL and 12.0 mg/100 mL after 1 month of storage and then remained stable until 6 months. General bacteria and coliform group were not detected during storage for 6 months.

• Korean Journal of Environmental Agriculture
• /
• v.1 no.1
• /
• pp.22-30
• /
• 1982

Water quality of downstream of the Nagdong river, using for agricultural irrigation of the Gimhae plain, were observed. Water temperature, turbidity, residue, pH, BOD, COD, DO, hardness, chloride, sulphate, phosphate, inorganic nitrogenous compounds, sodium, general bacteria, E. coli and heavy metals of the water were investigated at Daejeo, Sikman, Bongrim, Noksan, Machal and Jangyou pumping stations in the Gimhae plain in May, July and October, 1981. The results obtained were as follows; 1) Average value of analyzed components of the water at all sampling sites were 7.8 pH, 6.3 ppm BOD, 6.5 ppm COD, 6.4 ppm DO, 231 ppm hardness, 582 ppm Cl-, 412 ppm $SO_4--$, 2.32 ppm $PO_4---$, 3.8 ppm $NH_4+,\;478\;ppm\;Na+$, 2964 No. /100 ml total coliform, 0.0040 ppm Cd, 0.0066 ppm Pb, respectively. 2) The most heavily polluted site of all investigated ones was Sikman. It seemed to be caused by the vast quantity of wastewater discharged from industrial district in Gimhae city. The next polluted sites were Bongrim, Daejeo and Noksan, and comparatively less polluted sites were Machal and Jangyou, judging from both appearance and physicochemical observation. 3) At Sikman, the most heavily polluted site, average value of components were 8.0 pH, 8.1 ppm BOD, 8.2 ppm COD. These values were close to the limit point of agricultural water quality standard of 8.0 ppm BOD (COD). 4) Any apparent variation was not observed by the sampling season in most components except DO and $NH_4+$. DO of October was higher than that of May or July but $NH_4+$ was low. 5) $NH_4+$ content was comparatively high in downstream of the Nagdong river of which water is used as the agricultural irrigation in the Gimhae plain. Therefore, fertilizer application on the farming land must make account of nitrogen content of the irrigation water 6) It was considered that chloride and sodium contents would not influence the crop cultivation in common season, but in dry season irrigation must be done carefully.

• Journal of Korea Society of Industrial Information Systems
• /
• v.23 no.5
• /
• pp.119-134
• /
• 2018

Today, many firms face the environment of high uncertainty and severe competition due to the rapid technology development and the diverse needs of customers. In the business environment, one of the most important ways to gain sustainable competitive advantage and future growth engine is related to NPD (New Product Development), which is a very important issue for practice and academia. Thus, this study intends to provide new values to practitioners and researchers related to NPD by analyzing current research trends and future trends in NPD field. For this, we bibliometrically analyzed keyword networks which consist of keywords that were already published in the eminent journals from Scopus database to generate insights that have not been captured in the previous reviews on the topic. As a result, we could understand the extant research streams in NPD field, and suggest the changes of specific research topics based on the connected relationships among keywords over the time. In addition, we also foresaw the general future research trends in NPD field based on the keywords according to preferential attachment processes. Through this study, it was confirmed that NPD keyword network is a small world network that follows the distribution of power law and the growth of network is formed by link formation by keyword preferential attachment. In addition, through component analysis and centrality analysis, keywords such as Innovation, New product innovation, Risk management, Concurrent engineering, Research and development, and Product life cycle management are highly centralized in NPD keyword network. On the other hand, as a result of examining the change of preferential attachment of keywords over the time, we suggested the required new research direction including i) NPD collaboration with suppliers, ii) NPD considering market uncertainty, iii) NPD considering convergence with the other academic areas like technology management and knowledge management, iv) NPD from SME(Small and medium enterprises) perspective. The results of this study can be used to determine the research trends of NPD and the new research themes for interdisciplinary studies with other disciplines.

• Korean Journal of Social Welfare
• /
• v.58 no.2
• /
• pp.273-302
• /
• 2006

The introduction of cash payments for care is a distinct trend that characterizes changes in care policies since the 1990s. Recently, many developed countries have newly introduced or extended cash payments for care that allow care users to be able to plan themselves for their cares instead of receiving direct care services from the state. Cash payments for care can be said to be one of the alternative policies by which user choices are extended, and it becomes possible to establish demand-cantered care delivery systems more economically and effectively, hence addressing the issue of the financial limitations and rigid systems that are common in modern welfare states, which make it difficult to response to various needs. However, the design and administration of cash for care vary across different countries. Such variations of cash for care policies influence on the combination of consumerism (based on liberal market values intrinsic in the care market) and citizenship based on social solidarity. Those variations eventually produce impacts on the balance of responsibilities and the roles of families, the state and market regarding care in other words, balancing of welfare pluralism. This paper has attempted to find general meanings and particularity of cash for care polices in modem welfare states by means of looking at the characteristics of cash for care policies of four different countries (Netherlands, France, Germany and Italy) and their impacts on their care market. If the four countries are ranked by the degree that they emphasize citizenship in light with social rights, the Netherlands, France, Germany and Italy could be placed in due order. From an economic point of view and in terms of cost containment, those countries will be placed in an inverse order, It is apparent that in the course of planting cash for care policies in the existing social systems involving different socio-cultural conditions and labour markets, sometimes more emphasis is placed on the citizenship of care users, family carers and care providers than on cost containment issue, and sometimes vice versa. Behind this lies the process of different social valuation on what care is about; who can better deliver care; who should be responsible for care; how responsibilities should be shared and so on.

• The Journal of the Petrological Society of Korea
• /
• v.9 no.1
• /
• pp.13-28
• /
• 2000

Chojeong area is mainly composed of the Ogcheon Group which consists of regionally metamorphosed, age-unknown sedimentary rocks. In the northwestern parts, the Group is intruded by the Jurassic Daebo granite and Cretaceous felsic and mafic dykes. The lowermost, Midongsan Formation which consists of milky white impure quartzite, crops out along the anticline axes with N40E trend. Ungyori quartzite Formation is intercalated with quartzite and slate. Miwon Formation is most widely exposed in the area and consists mainly of phyllitic sandy rocks with a thin crystalline limestone bed. Hwajeonri Formation is divided into two parts, pelitic lower and calcareous upper parts, composed with phyllite and slate. Changri and Hwanggangri Formations are typical members of Ogcheon Group, the former bearing coally graphite seams consists mainly of black slate and phyllite with intercalated greenish grey phyllite, the latter is pebble bearing phyllite formation of which matrix and pebbles are variable in compositions and size. Biotite granite, porphyritic granite and two mica granite belong to Jurassic so-called Dabo granite. They intruded the Ogcheon Group forming vast contact metarnophic zone. Quartz porphyry, mafic dyke and felsite intruded along the marginal zone of porphyritic granite batholith and fracture of NS trend. Main structural lineaments in Ogcheon Group shows N25-45E, NS and N30-45W trends. The N25-45E trends are mainly from general ductile deformation during regional metamorphism, showing isoclinal folding, Fl foliations and lithological erosional characters. Some of these trends are due to normal faults. The NS and N30-45W trends represent brittle deformation including faults and joints. In the area of granitic batholith, NS to N30- 45 trends are from the direction of dykes. In the soils of the area, average contents of heavy metal elements such as Cd, Cr, Cu, Pb, and Zn are 0.2, 50.6, 35.5, 27.9, and 93.4 ppm respectively, which are not higher than the average values of natural soils, under the tolerable level. Enrichment Index does not show any heavy metal pollution in the area. Average depths of weathering(5m vs. 2m), porosities(43.94 vs. 51.80), densities(l.29 vs. 1.15), and permeabilities(2.52 vs. 8.07) are comparable in granite areas and in the phyllite areas of Ogcheon Group.

• Food Science and Preservation
• /
• v.12 no.1
• /
• pp.36-42
• /
• 2005

The purpose of this study was to investigate the component and quality characteristics of green tea. Four kinds of green tea powder obtained from Hwagae area were evaluated the component of carbohydrates, protein crude fat and crude ash. Also the content of ascorbic acid, minerals and polyphenols in green tea powder were evaluated. Quality characteristics of green tea powder was evaluated by Hunter's colur value and sensory evaluation. Green tea was composed of $9.2\~11.8\%$ of moisture, $4.9\~6.1\%$ of crude ash, $5.2\~6.1\%$ of crude fat, $22.5\~26.4\%$ of protein and $50.4\~55.1\%$ of cabohydrates. The content of total ascorbic acid in green tea powder was $312\~392mg/100g$ and dehydiuascorbic acid was $157\~176mg/100g$. The contents of minerals in green tea powder sodium was $340\~580mg/100g$, magnesium was $242\~320mg/100g$, potassium $223\~278mg/100g$ me calcium $145.7\~238.7mg/100g$. Polyphenol content of green tea powder was $7.8\~9.3\%$ which was the highest in A and the lowest in B. Hunters color values of green tea, lightness(L) was $52.3\~69.6$, redness(a) was $0.11\~-5.61$, yellowness(b) was $14.23\~23.34$, which were better in green tea C and D than green tea A and B. From sensory evaluation of green tea powders, green tea D obtained the significant highest scores in color, flavor and overall quality(p<0.05) and followed by green tea C, Green tea powder C and D which have high levels of protein and ascorbic acid were evaluated as good quality in color and sensory evaluation.

• Korean Journal of Plant Resources
• /
• v.19 no.1
• /
• pp.1-7
• /
• 2006

This study was conducted to determine chemical compounds and antioxidant in Aruncus dioicus. Further, effects of cultural practices such as the shading conditions on the general compounds, essential oils and antioxidants. The chemical compounds and antioxidant activity of edible extracts on the shading cultivation and harvesting time were measured by crude fiber, pigments, higher fatty acids, essential oils and DPPH free radical scavenging ability and activities of SOD and POD in edible shooting parts of Aruncus dioicus. The contents of crude fiber, total chlorophyll and total carotenoids in extracts of edible shooting by shading cultivation and later harvesting were higher than those of non-shading cultivation and early harvesting. Phenolic compounds such as benzoic acid were identified as the aromatic compounds in the edible extracts of Aruncus dioicus. The contents of azulene, benzaldehyde and linalool among those compounds on the cultivation conditions increased in shading cultivation. $IC_{50}$ values of DPPH free radical scavenging activities were high from 6.644 to $14.499{mu}g/m{\ell}$ in extracts of edible parts and those of edible shooting parts was high such as edible shooting cultivated by 60% shading, 30% shading and non-shading, respectively. The activity of POD and SOD in seeds was lower than that of edible shooting and that by shading cultivation was high in extracts cultivated by non-shading. POD activity of extracts on harvesting time was high in earlier harvesting but SOD activity was low. The numbers of isozyme pattern of POD and SOD in seedling showed 7 bands and 3 bands, respectively, especially, bands of POD and SOD in the first year-growing plant did not show and show a difference according to plant positions, respectively.

• Nuclear Engineering and Technology
• /
• v.39 no.5
• /
• pp.603-616
• /
• 2007

Roy Huddle, having invented the coated particle in Harwell 1957, stated in the early 1970s that we know now everything about particles and coatings and should be going over to deal with other problems. This was on the occasion of the Dragon fuel performance information meeting London 1973: How wrong a genius be! It took until 1978 that really good particles were made in Germany, then during the Japanese HTTR production in the 1990s and finally the Chinese 2000-2001 campaign for HTR-10. Here, we present a review of history and present status. Today, good fuel is measured by different standards from the seventies: where $9*10^{-4}$ initial free heavy metal fraction was typical for early AVR carbide fuel and $3*10^{-4}$ initial free heavy metal fraction was acceptable for oxide fuel in THTR, we insist on values more than an order of magnitude below this value today. Half a percent of particle failure at the end-of-irradiation, another ancient standard, is not even acceptable today, even for the most severe accidents. While legislation and licensing has not changed, one of the reasons we insist on these improvements is the preference for passive systems rather than active controls of earlier times. After renewed HTGR interest, we are reporting about the start of new or reactivated coated particle work in several parts of the world, considering the aspects of designs/ traditional and new materials, manufacturing technologies/ quality control quality assurance, irradiation and accident performance, modeling and performance predictions, and fuel cycle aspects and spent fuel treatment. In very general terms, the coated particle should be strong, reliable, retentive, and affordable. These properties have to be quantified and will be eventually optimized for a specific application system. Results obtained so far indicate that the same particle can be used for steam cycle applications with $700-750^{\circ}C$ helium coolant gas exit, for gas turbine applications at $850-900^{\circ}C$ and for process heat/hydrogen generation applications with $950^{\circ}C$ outlet temperatures. There is a clear set of standards for modem high quality fuel in terms of low levels of heavy metal contamination, manufacture-induced particle defects during fuel body and fuel element making, irradiation/accident induced particle failures and limits on fission product release from intact particles. While gas-cooled reactor design is still open-ended with blocks for the prismatic and spherical fuel elements for the pebble-bed design, there is near worldwide agreement on high quality fuel: a $500{\mu}m$ diameter $UO_2$ kernel of 10% enrichment is surrounded by a $100{\mu}m$ thick sacrificial buffer layer to be followed by a dense inner pyrocarbon layer, a high quality silicon carbide layer of $35{\mu}m$ thickness and theoretical density and another outer pyrocarbon layer. Good performance has been demonstrated both under operational and under accident conditions, i.e. to 10% FIMA and maximum $1600^{\circ}C$ afterwards. And it is the wide-ranging demonstration experience that makes this particle superior. Recommendations are made for further work: 1. Generation of data for presently manufactured materials, e.g. SiC strength and strength distribution, PyC creep and shrinkage and many more material data sets. 2. Renewed start of irradiation and accident testing of modem coated particle fuel. 3. Analysis of existing and newly created data with a view to demonstrate satisfactory performance at burnups beyond 10% FIMA and complete fission product retention even in accidents that go beyond $1600^{\circ}C$ for a short period of time. This work should proceed at both national and international level.

• Conservation Science in Museum
• /
• v.19
• /
• pp.1-18
• /
• 2018

The Stele for National Preceptor Hongbeop from the Jeongtosa Temple site in Chungju is one of the most important stone cultural heritage items for exemplifying the style of the Goryeo era. Despite its obvious value, this relic has been stored in a weathered condition at the National Museum of Korea. It had suffered various dismantling and displacements during the Japanese colonial period and had long been exposed in the open air. The stele was selected as a subject for the Stone Monuments Restoration Project launched by the National Museum of Korea in 2015. In preparation for its outdoor exhibition as part of the restoration project, this study investigated the characteristics of its materials, produced a map of its deterioration from weathering, and carried out ultrasonic analysis of the materials to provide findings useful for conservation treatment. The materials analysis revealed that the turtle-shaped pedestal of the stele was made from two-mica granite consisting of medium-grained quartz, plagioclase, alkali feldspar, biotite, and muscovite. Its body stone is crystalline marble, the rock-forming mineral in which is medium-grained calcite in a rose-pink color with dark grey spots. The dragon top of the stele is made of crystalline marble, the major component of which is medium-grained calcite of a light-grey color. The deterioration consists of 21.5% abrasion on the stone body, with its south face most damaged, and 18.6% granular disintegration, with the north face most damaged. The ultrasonic material characterization conducted for mapping the general condition of weathering shows low values on the parts-assembly area of the turtle-shaped pedestal and on the upper portion of the stone body. It is considered that there is dislocation due to partial blistering and fracturing as well as to the differences in surface treatment. Prior to the outdoor exhibition of the stele, the surface was cleaned of contaminants and was consolidated based on the scientific investigation in order to prevent weathering from the external environment.