• 제목/요약/키워드: general values

검색결과 2,840건 처리시간 0.029초

μ-GA를 이용한 원전 캐비닛구조물의 최적감쇠보강 (The optimum damping retrofit for cabinet structures of NPP by μ-GA)

  • 이계희;하동호
    • 한국지진공학회논문집
    • /
    • 제9권1호통권41호
    • /
    • pp.1-7
    • /
    • 2005
  • 본 논문에서는 원전내부의 내진범주 1급 계전기를 포함하고 있는 캐비닛 구조물의 최적내진보강에 대한 연구를 수행하였다. 지진시 계전기는 구조적인 파괴보다는 떨림에 의한 기능적 파괴가 발생한다. 이를 방지하기 위해서는 캐비닛구조물의 응답을 적정 수준이하로 감소시켜야 하므로 다양한 감쇠보강의 설치패턴에 따라 최적의 감쇠계수를 ${\mu}$-GA(micro-Genetic Algorithm)기법을 이용하여 산정하였다. 대상캐비닛 구조물은 해석의 정확도와 계산의 효율성을 만족시키기 위해 이용한 프레임구조로 모델링되었다. 구조물의 응답은 감쇠기의 비선형거동을 고려한 비선형 시간이력해석에 의해 얻어진 가속도응답스펙트럼으로 나타내었다. 목적함수는 구조물의 해석에서 얻어진 응답스펙트럼의 최대값과 목표 포괄기기내진력 스펙트럼 (GERS; General Equipment Ruggedness Spectra)의 최대응답비를 기초로 작성되었다. 해석결과 적절한 보강패턴을 선정한 경우 좋은 적합도의 향상을 보였으며 특히 감쇠지수의 값이 작은 경우 적합도의 개선효과가 뛰어났다.

일부 농촌지역의 오염원 현황과 먹는 물 수질에 관한 조사연구 (A Study on the Drinking Water Quality and Contamination Sources in a Rural Area)

  • 김탁수;이용미;김문선;김성연;신해철;최경호;정문호
    • 한국환경보건학회지
    • /
    • 제30권2호
    • /
    • pp.98-103
    • /
    • 2004
  • To evaluate the quality of drinking water and contamination sources in a rural community, this study was carried out on the summer of 2003 at Shin-Dong Myun, Chun-Cheon, Gang-Won province. Seventy three drinking water samples were collected from three different types of water supply systems. Sources of contamination were identified and the public perception of water quality area were evaluated. The findings of this study are as follows; Drinking water was mainly obtained from Local Water and Simple Piped Water Supply Systems, and pollution sources varied over the study area. Most of residents (>63%) were satisfied with the quality of drinking water and could not identify any contamination sources. Corresponding to this perception, measured water quality parameters generally met the Drinking Water Quality Standards (>64%). However, approximately 35.6% of samples exceeded the regulation for Nㅒ$_3$$^{-}$$_{-}$N, coliform, and general bacteria. The water quality was significantly different among the three water supply systems, and between the potentially contaminated areas and the rest of the areas (p<0.05). In the potentially contaminated areas, the levels of coliform and general bacteria contamination were significantly higher than the rest of the areas (p<0.05). The coliform and general bacteria values of Simple Piped Water were significantly higher than Own Piped Water's, and the NO$_3$$^{-}$$_{-}$N values of Own Piped Water were significantly higher than those of water's (p<0.05). Based on this study, NO$_3$$^{-}$$_{-}$N, coliform, and general bacteria were identified as a major problem of drinking water. To regularly manage drinking water supply systems, to identify contamination sources, and to add drainage systems are required in the study area.

현장 실험을 통한 Sputter Coating 컬러 BIPV 모듈의 발전성능 평가 (Performance Assessment of Sputter-Coating-Colored BIPV Modules Through Field Test)

  • 이효문;윤종호;김현일;이건환
    • 한국태양에너지학회 논문집
    • /
    • 제40권5호
    • /
    • pp.1-12
    • /
    • 2020
  • To assess the performance and characteristics of colored building-integrated photovoltaic (BIPV) modules, a comparative assessment of empirical performance was conducted on colored BIPV modules (gray, blue, and orange) and general BIPV module. These modules were installed on the south-facing slope (30°) for comparative assessment through a field test. Monitoring data were collected every 10 min from December 20, 2019 to January 21, 2020 and used to performance and characteristics analysis. Performance ratio and module efficiency were utilized during performance indexing for comparative assessment. For general BIPV modules, the operational efficiency was analyzed at 16.63%, whereas for colored BIPV modules, 13.70% (gray), 15.12 % (blue), and 14.49% (orange) were analyzed. It was discovered that the efficiency reduction caused by transmission losses owing to the application of colored cover glasses were 17.74% (gray), 9.05% (blue), and 9.86 % (orange), under field testing conditions. These values turned on an additional 7% reduction in efficiency for gray BIPV modules, compared to the degradation resulting from transmission drop (gray: 10.87%, blue: 8.99%, and orange: 9.02%) calculated using the efficiency of each module in standard test conditions (STC). Performance ratio analysis resulted in the following values: 0.92 for general BIPV modules, and 0.85 (gray), 0.91 (blue), and 0.91 (orange) for colored BIPV modules. As demonstrated by the above results, modules with a colored cover glass may differ in their operational performance depending on their color, unlike general modules. Therefore, in addition to the performance evaluation under STC, additional factors of degradation require consideration through field test.

다층 지르코니아 블록 종류와 소결방법에 따른 지르코니아 코핑의 파절강도와 색조 비교 (Comparison of fracture strength and color of zirconia copings according to multi-layer zirconia blocks and sintering method)

  • 강재민;김원영;정인성
    • 대한치과기공학회지
    • /
    • 제41권3호
    • /
    • pp.195-201
    • /
    • 2019
  • Purpose: This study was investigated the effect of multilayer zirconia block type and sintering method on fracture strength, micro structure and color of zirconia copings. Methods: Three kinds of multi-layered zirconia blocks were used to identify the effects of the kinds of multi-layered zirconia blocks and sintering methods on fracture strength and color reproducibility of zirconia copings. 60 Zirconia copings were fabricated and fracture strength, micro structure and color reproducibility were compared and evaluated. Results: In all the blocks, the CS group, which refers to the general sintering method had higher fracture strength of zirconia copings than the MS group that refers to the microwave sintering method(MCS/MMS; 2,107.5N/1,930.4N, DCS/DMS; 917.0N/879.1N, UCS/UMS; 2,256.9/2,050.7N). In relation to CIE $L^*$, $a^*$, $b^*$ values of zirconia copings depending on the kinds of multi-layered zirconia blocks and sintering methods, the MS group using the microwave sintering method had lower brightness and chroma than the CS group using the general sintering method. Conclusion: In all the blocks, the CS group(general sintering) had higher fracture strength of zirconia copings than the MS group(microwave sintering). In relation to CIE $L^*$, $a^*$, $b^*$ values of zirconia copings depending on the kinds of multilayered zirconia blocks and sintering methods, the MS group using the microwave sintering method had lower brightness and chroma than the CS group using the general sintering method.

Comparative Estimation of Exposure Level and Health Risk Assessment of Highly Produced Pesticides to Agriculture Operators by Using Default Dermal Absorption Rate or Actual Measurement Values

  • Kim, Su-Hyeon;Lee, Chang-Hun;Kim, Ki-Hun;Jeong, Sang-Hee
    • 대한의생명과학회지
    • /
    • 제22권4호
    • /
    • pp.199-206
    • /
    • 2016
  • Pesticides are widely used to prevent loss of agricultural production but extensive exposure can induce health problems to pesticide operators. This study was performed to evaluate the health risk of highly produced pesticides used in fruit growing farm land by comparison of estimated exposure level with AOEL using KO-POEM program. AOEL was driven based on NOAEL of each pesticide evaluated by JMPR, EFSA or KRDA. In calculation of exposure level, types of formulation, dilution factors, spraying duration and motor type and exposure protection device were allocated according to actual condition of use. Dermal absorption rate was differently applied among EFSA default values (25% or 75%), general default value (10%) or real test result values to know the plausibility of default values and safety of pesticide to operators in outline. Twenty pesticide ingredients (fungicides and insecticides) were produced more than 30 tons per year, which were mancozeb, chlorothalonil, imidaclopirid and etc in order. Dermal absorption rates obtained from studies were various from 0.07 to 81% but mostly under 10%. The estimated exposure levels showed big differences more than 10 times higher when using EFSA default rate and up to 5 times higher when using general rate of 10% comparing using rates of test results. Mancozeb, chlorthalonil, diazinon and chlorpyrifos presented still higher exposure level than AOEL even when using test absorption rate from study, which suggests that re-evaluation of AOEL or dermal exposure absorption rate or strict management are required for health protection of operators who use those four pesticides in farm land.

백삼, 홍삼 및 흑삼 분말 첨가에 따른 현미다식의 품질 특성 (Quality Characteristics of Brown Rice Dasik Addition of White, Red and Black Ginseng Powder)

  • 김애정;한명륜;정경희;강신정
    • 한국식품영양학회지
    • /
    • 제22권1호
    • /
    • pp.63-68
    • /
    • 2009
  • Powders prepared from three different varieties Korean Ginsengs(white, red and black) are readily available ingredients and are consumed daily by many Korean as a functional food material. These variants of Ginsengs are known to exert a variety of physiological effects. Therefore, in this study, we assessed the physiochemical characteristics of Korean Ginseng Dasik prepared with different 3 types of Ginseng powder. We conducted a sensory evaluation analysis, and assessed the mechanical characteristics, Hunter's color values, and general compositions of 3 types of Korean Ginseng Dasik stored at room temperature(20$^{\circ}C$). The results of our sensory evaluation showed that there were significant differences in the color, taste and overall quality of the samples(p<0.05), but there were no significant differences in odor or texture. With regard to the mechanical properties of the samples, we noted significant differences in he Hardness, Cohesiveness, Gumminess and Chewiness of the samples(p<0.05), but no differences in springiness were detected. The luminance of the black Ginseng Dasik was significantly less than that of the red, white, and control samples(p<0.05), We noted significant differences in Hunter's b values, but no significant differences in Hunter's a values among the samples were detected. No significant differences in the general compositions of the samples were noted. In conclusion, red Ginseng Dasik among the samples evaluated herein, has the most commercial value.

단일 프레임 영상에서 초점을 이용한 깊이정보 생성에 관한 연구 (A Study on Create Depth Map using Focus/Defocus in single frame)

  • 한현호;이강성;이상훈
    • 디지털융복합연구
    • /
    • 제10권4호
    • /
    • pp.191-197
    • /
    • 2012
  • 본 논문에서는 단일 프레임 영상에서 초점을 이용하여 초기 깊이정보를 추출한 후 입체 영상을 생성하는 방법을 제안하였다. 단일 프레임 영상에서 깊이를 추정하기 위해 원본 영상과 가우시안 필터를 중첩 적용하여 생성된 영상의 비교를 통해 영상의 초점 값을 추출하고 추출된 값을 기반으로 초기 깊이정보를 생성하도록 하였다. 생성된 초기 깊이정보를 Normalized cut을 이용한 객체 분할 결과에 할당하고 각 객체의 깊이를 객체 내 깊이 정보의 평균값으로 보정하여 동일 객체가 같은 깊이 값을 갖도록 하였다. 객체를 제외한 배경 영역은 객체를 제외한 배경 영역의 에지 정보를 이용하여 깊이를 생성하였다. 생성된 깊이를 DIBR(Depth Image Based Rendering)을 이용하여 입체 영상으로 변환하였고 기존 알고리즘을 통해 생성된 영상과 비교 분석하였다.

치위생학생의 윤리적 가치관에 관한 연구 (A study on the ethical values of dental hygiene students)

  • 강부월
    • 한국치위생학회지
    • /
    • 제10권1호
    • /
    • pp.1-18
    • /
    • 2010
  • Objectives : The purpose of this study was to examine the ethical values of dental hygiene students and set up the way of ethic educationin educational course. Methods: The subjects in this study were 948 students in four colleges located in the metropolitan area, on whom a survey was conducted. Results : 1. Regarding values of human life, they got a mean of 3.01, which showed that they sort of took a deontological view. 2. As to values of dental hygiene duties, they got a mean of 3.62, which indicated that they took a deontological view. 3. Concerning values of clients, they got a mean of 3.22, which implied that they took a deontological view. 4. As for values of collaborators, they got a mean of 3.90, which denoted that they took a very deontological view. 5. In regard to correlation among each part of their ethical values, there was a very significant correlation between their views of dental hygiene duties and human life, and between their views of clients and collaborators(p<.001). 6. As to the relationship of general characteristics to ethical values, they took a significantly different view of human life according to academic year(p<.05), religion(p<.001), religious enthusiasm(p<.0010) and attitude to the occupation of dental hygienist(p<.001). Academic year Conclusions : Regardings ethical values of dental hygiene students which showed that they took a deontological view than autilitarianism view in all parts. Accordingly, In order to establish desirable ethical values, it was scrutinized that reinforcement of education on biomedical ethics and professional ethics in curriculum was needed.

Using Chemical and Biological Approaches to Predict Energy Values of Selected Forages Affected by Variety and Maturity Stage: Comparison of Three Approaches

  • Yu, P.;Christensen, D.A.;McKinnon, J.J.;Soita, H.W.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제17권2호
    • /
    • pp.228-236
    • /
    • 2004
  • Two varieties of alfalfa (Medicago sativa L cv. Pioneer and Beaver) and timothy (Phleum pratense L cv. Climax and Joliette), grown at different locations in Saskatchewan (Canada), were cut at three stages [1=one week before commercial cut (early bud for alfalfa; joint for timothy); 2=at commercial cut (late bud for alfalfa; pre-bloom head for timothy); 3=one week after commercial cut (early bloom for alfalfa; full head for timothy)]. The energy values of forages were determined using three approaches, including chemical (NRC 2001 formula) and biological approaches (standard in vitro and in situ assay). The objectives of this study were to determine the effects of forage variety and stage of maturity on energy values under the climate conditions of western Canada, and to investigate relationship between chemical (NRC 2001 formula) approach and biological approaches (in vitro and in situ assay) on prediction of energy values. The results showed that, in general, forage species (alfalfa vs. timothy) and cutting stage had profound impacts, but the varieties within each species (Pioneer vs. Beaver in alfalfa; Climax vs. Joliette in timothy) had minimal effects on energy values. As forage maturity increased, the energy contents behaved in a quadratic fashion, increasing at stage 2 and then significantly decreasing at stage 3. However, the prediction methods-chemical approach (NRC 2001 formula) and biological approaches (in vitro and in situ assay) had great influences on energy values. The highest predicted energy values were found by using the in situ approach, the lowest prediction value by using the NRC 2001 formula, and the intermediate values by the in vitro approach. The in situ results may be most accurate because it is closest to simulate animal condition. The energy values measured by biological approaches are not predictable by the chemical approach in this study, indicating that a refinement is needed in accurately predicting energy values.

한국과 미국 여대생의 가치관과 의복선택행동에 관한 비교연구 (A comparative study of general values and clothing behavior of college female students in Korea and America.)

  • 강경자
    • 대한가정학회지
    • /
    • 제24권3호
    • /
    • pp.31-42
    • /
    • 1986
  • It is generallybelieved that the values of female students are different depending on the cultural enviromment of society. The purpose of this paper is to discern the value orientation of female students in Korea and America, and how they are related to the clothing behavior. 300 female students were selected as sample from the Univ. of Minnesota and 158 students filled out the questionnair. 420 female students were selected from five unversities in Jinju, Taegy and Pusan. RESULTS : 1) Korean students had highly evaluated theaethetic, political, religious and social values, and American students had higher evaluation on the economic and American students had higher evaluation on the economic and theoretical values. 2) Korean students tended to regard modesty, conformity and management as important factors when they chose new clothes, and for American students, appearance and tool were important. 3) The impact of values on clothing vehavior was as follows. a) Korean students who emphasized theoretical values did not use clothes as an instrument of status symbol and modesty. b) American students who emphasized the economic values tended to have an interest in purchase and wearing of clothes on purpose. c) Korean students who had positive attitudes on the aethetic values tended to be conservative, but they wanted to use the clothes as a demonstration of self exaggeraton. d) Korean students who regarded social values important tended to have a higher interest in the management of clothes. e) Korean students who had highly evaluated the religious values tended to be conservative when the selected new clothes. American students did not want to conform to the group norm when they chose new clothes. On the whole, American students did not put on clothes to achieve a specific goal. In short, it can be concluded that Korean students and American students have different values and they have a great impact on their clothing behavior.

  • PDF