Jun Ssang-Sun;Lee Hyo-Min;Seo Ki-Young;Hwang Jin-Yeon;Jin Chi-Sub
Journal of the Korea Concrete Institute
/
v.17
no.1
s.85
/
pp.129-137
/
2005
In Korea, due to the insufficiency of natural aggregates and increasing needs of crushed stones, it is necessary to examine the alkali-silica reaction of the crushed stones. The reaction produces an alkali-silica reaction gel which can imbibe pore solution and swell to generate cracks that are visible In affected concrete. In general, crushed stones are tested by petrograptuc examination, chemical method and mortar-bar method, but the most reliable method Is mortar-bar test. This study tested alkali-silica reactivity of crushed stones of various rock types using ASTM C 227 and C 1260, and compared the results of two test methods. This study also analyzed effects of particle size and grading of reactive aggregate on alkali-silica reaction expansion of mortar-bar. The effectiveness of mineral admixtures to reduce detrimental expansion caused by alkali-silica reaction was investigated through the ASTM C 1260 method. The mineral admixtures used were nv ash, silica fume, metakaolin and ground granulated blast furnace slag. The replacement ratios of 0, 5, 10, 15, 25 and $35\%$ were commonly applied for all the mineral admixtures and the replacement ratios of 45 and $55\%$ were additional applied for the admixtures that could maintain workability. The results indicate that replacement ratios of $25\%$ for ay ash, $10\%$ for silica fume, $25\%$ for metakaolin or $35\%$ for ground granulated blast furnace slag were most effective to reduce alkali-silica reaction expansion under the experimental conditions.
This study was conducted to find the changes of growth, seed yield and several characteristics of sesame by leaf spray of boron as a solution which is likely to be lack in the soil. It is carried out at low land developed 5 years ago. The amount of 200l /l0a boron as boric acid is sprayed in each treatment at the 11 node stage of sesame in main stem. The spraying concentrations of boric acid are 0.0, 0.2 and 0.4% in each treatment of the level low plot and the ridge height 15cm plot. The result shows that leaf area is increased in proportion to the concentration of boric acid in each treatment of the level low and the ridge height 15cm, and the degree of increase of each node order is remarkable in lower leaves and is more remarkable in the treatment of level low plot. The effects of leaf spray of boric acid are not only the increase of leaf area but also dry weight, no. of capsule per plant, 1,000 grains weight of capsule setting under middle position. As a result, the amount of seed is increased in 53% in the treatment of level low. The change of major characteristics according to leaf spray of boric acid is generally great in the treatment of level low. Especially the increase of leaf area in the part of upper leaves and low leaves is effective to improve other characteristics.
Several isotopomers of cyclooctanone were prepared by selective deuterium substitution. Intrinsic isotope effects on $^{13}C$ NMR chemical shifts of these isotopomers were investigated systematically at low temperature. These istope effects were discussed in relation to the preferred boat-chair conformation of cyclooctanone. Deuterium isotope effects on NMR chemical shifts have been known for a long time. Especially in a conformationally mobile molecule, isotope perturbation could affect NMR signals through a combination of isotope effects on equilibria and intrinsic effects. The distinction between intrinsic and nonintrinsic effects is quite difficult at ambient temperature due to involvement of both equilibrium and intrinsic isotope effects. However if equilibria between possible conformers of cyclooctanone are slowed down enough on the NMR time scale by lowering temperature, it should be possible to measure intrinsic isotope shifts from the separated signals at low temperature. $^{13}C$ NMR has been successfully utilized in the study on molecular conformation in solution when one deals with stable conformers or molecules were rapid interconversion occurs at ambient temperature. The study of dynamic processes in general requires analysis of spectra at several temperature. Anet et al. did $^1H$ NMR study of cyclooctanone at low temperature to freeze out a stable conformation, but were not able initially to deduce which conformation was stable because of the complexity of alkyl region in the $^1H$ NMR spectrum. They also reported the $^1H$ and $^{13}C$ NMR spectra of the $C_9-C_{16}$ cycloalkanones with changing temperature from $-80^{\circ}C$ to $-170^{\circ}C$, but they did not report a variable temperature $^{13}C$ NMR study of cyclooctanone. For the analysis of the intrinsic isotope effect with relation to cylooctanone conformation, $^{13}C$ NMR spectra are obtained in the present work at low temperatures (up to $-150^{\circ}C$) in order to find the chemical shifts at the temperature at which the dynamic process can be "frozen-out" on the NMR time scale and cyclooctanone can be observed as a stable conformation. Both the ring inversion and pseudorotational processes must be "frozen-out" in order to see separate resonances for all eight carbons in cyclooctanone. In contrast to $^1H$ spectra, slowing down just the ring inversion process has no apparent effects on the $^{13}C$ spectra because exchange of environments within the pairs of methylene carbons can still occur by the pseudorotational process. Several isotopomers of cyclooctanone were prepared by selective deuterium substitution (fig. 1) : complete deuterium labeling at C-2 and C-8 positions gave cyclooctanone-2, 2, 8, $8-D_4$ : complete labeling at C-2 and C-7 positions afforded the 2, 2, 7, $7-D_4$ isotopomer : di-deuteration at C-3 gave the 3, $3-D_2$ isotopomer : mono-deuteration provided cyclooctanone-2-D, 4-D and 5-D isotopomers : and partial deuteration on the C-2 and C-8 position, with a chiral and difunctional case catalyst, gave the trans-2, $8-D_2$ isotopomer. These isotopomer were investigated systematically in relation with cyclooctanone conformation and intrinsic isotope effects on $^{13}C$ NMR chemical shifts at low temperature. The determination of the intrinsic effects could help in the analysis of the more complex effects at higher temperature. For quantitative analysis of intrinsic isotope effects, the $^{13}C$ NMR spectrum has been obtained for a mixture of the labeled and unlabeled compounds because the signal separations are very small.
This experiment was conducted to investigate available extraction capacity and potential mobility of heavy metal according to the distribution property and contamination level of heavy metals in soils and to suggest a reform measure of soil environment assessment methodology applied with soil quality and the official soil heavy metal test methods in domestic and foreign countries. The soils were collected from the natural forest paddy with long-term application of same type fertilizer, and paddies near metal mine and industrial complex. The post-treatment methods of soil were partial extraction, acid digestion and sequential extraction methods. For the heavy metal contents with different soil properties, it was shown that their natural forest and paddy soil were slightly low and similar to the general paddy soil, while their paddies near metal mine and industrial complex were higher than the standard level of Soil Environment Protection Act. Heavy metal concentrations in the soils with different soil properties had difference between $HNO_3\;and\;HNO_3+HCl$ extractant by US-EPA 3051a method. There were highly significant positive relationships in both two methods. It was appeared that the higher extractable concentration ratio with 0.1N-HCl to total heavy metal content with $HNO_3+HCl$ extractant the greater total heavy metal content. There were highly significant positive correlationship between total heavy metal content and extractable content with 0.1N-HCl. For extractable capacity of soil extractable solution compared to the total heavy metal content it was appeared that it extractable method with 0.1N-HCl was higher than those with EDTA and DTPA. In extractable ratio with 0.1N-HCl in the contaminated paddy soils near mine and industrial complex, it was shown that the lower soil pH, the higher total heavy metal content. The order of a potential mobility coefficient by distribution of heavy metal content with ie different typies in the soil was Cd>Ni>Zn>Cu>Pb. It could be known that contamination characteristics of heavy metals with different types of soils were affected by different heavy metal components, contamination degree and soil chemical properties, and heavy metal concentration with different extractable methods had great variations with adjacent environment. To be compared with assessment methodology of soil environment impact at domestic and foreign countries with our results, it might be considered that there was necessary to make a single analysis method based on total heavy metal content with environmental overloading concept because of various analysis methods for total heavy metal content and present analysis method with great variation according to soil environment. In spite of showing higher concentration of heavy metal with acidic digestion than the extractable method, it might be considered that there is need to be adjusted the national standard of soil heavy metal contamination.
In general, content business companies include animation industry can have benefits, which they have higher incomes when they obtain wider markets. Therefore, they pursue to have diverse windows for content distribution or to reach the foreign markets for dealing their content products with potential customers. It have the greatest value. They can re-invest the incomes to produce their new products, and they can enhance the international competitiveness of their next products. As the results, the companies can have more incomes and wider markets in next business, and it will be the effectiveness of the good cycle of the animation industry. Animation industry has being undergone of its structure changes, more economical chances and viewers' attitudes changes through the all over the industry because of the acceptance of new digital technology. To response the changes or have the new chances from the changes, they should to review the existing system and the law concerned with the animation business as well as having the diverse new plans for supporting the industry like a construction of the online marketplace of Korean animation. It would make the Korean animation companies to meet foreign customers easily by making lower the entrance barrier of the foreign markets. Current Korean government needs to estimate the value of the Korean animation accurately and objectively by concerning its surroundings to support efficiently. However, it is very difficult to estimate the value of the content rightly because of its' intangible and subjective matter. For this, they should analyze the all the data of the information of the Korean animation content by accumulate, open to the public and manage. So if the government makes online marketplace for the Korean animation, which all the Korean animation companies get in, it would be a solution of estimating the value of the Korean animation rightly. In addition, it will be used as the role of archive of the government to lead the industry successfully. As a point of the small size of the Korean animation companies, they are government dependable because of its low budget, so they strongly expect the government to do the right role as the unique knowledge distributor. Therefore, the Korean animation online marketplace would make not only big companies, but also small companies to have the chances to increase the value of their content in the global markets by themselves without economic burdens.
Kim, Jung-Eun;Lee, Hye-Jin;Lim, Myoung-Sun;Park, Min-A;Park, Soo-Nam
Journal of the Society of Cosmetic Scientists of Korea
/
v.38
no.1
/
pp.15-31
/
2012
In our previous studies, the antioxidant, anti-aging, and antibacterial activities of Persicaria hydropipier L. extract, and the moisturizing effect of cream containing P. hydropipier extract were investigated. In this study, the cellular protective effects of P. hydropipier extract and isoquercitrin, main component from P. hydropipier in $^1O_2$-induced photohemolysis of human erythrocytes and ultraviolet B (UVB)-exposed HaCaT cells were investigated. Liposomes such as ethosome and elastic liposome for enhanced transdermal delivery were prepared. Size, loading efficiency, stability, and cumulative permeated amounts of ethosomes and elastic liposomes were evaluated. P. hydropipier extract and isoquercitrin showed more prominent cellular protective effect than (+)-${\alpha}$-tocopherol, known as lipid antioxidant at $5{\mu}g/mL$. P. hydropipier extract didn't show any characteristics of cytotoxicity at $50{\mu}g/mL$. When HaCaT cells were exposed to a single large dose ($400mJ/cm^2$) of UVB, the extract protected the cells against UVB radiation in a concentration dependent manner ($12.5{\sim}50{\mu}g/mL$). Cell viability of HaCaT cells exposed to UVB $400mJ/cm^2$ was increased by treatment with P. hydropipier extract or isoquercitrin from 36 % (cell viability of positve control groups) to 90 % (cell viability of P. hydropipier extract or isoquercitrin- treated groups). The size of 0.04 % P. hydropiper extract loaded ethosomes was 173.0 nm and the loading efficiency was 55.58 %. 0.04 % P. hydropiper extract loaded ethosomes were stable with as monodisperse particles for 1 week. The ethosome exhibited more skin permeability than general liposome and ethanol solution. The optimal ratio of lipid to surfactant ($Tego^{(R)}$ care 450) of 0.1 % P. hydropiper extract loaded elastic liposomes was observed to be 95 : 5. Vesicle size of 0.1 % P. hydropiper extract loaded elastic liposome was 176.5 nm. The deformability index of the elastic liposome was 16.4. The loading efficiency was 68.8 %. The elastic liposome containing P. hydropiper extract showed more skin permeability than liposome without surfactant ($Tego^{(R)}$ care 450).
Dephosphorylation of diphenyl- or isopropylphenyl-4-nitrophenylphosphinate (DPNPIN or IPNPIN) mediated by $OH^-$ or o-iodosobenzoate ion ($IB^-$) are relatively slow in aqueous solution. The reactions in CTAX micellar solutions are, however, very accelerated, because CTAX micelles can accommodate both reactants in their Stern layer in which they can easily react, while hydrophilic $OH^-$(or $IB^-$) and hydrophobic phosphinates are not mixed in water. Even though the concentrations (> $10^{-3}$ M) of $OH^-$(or $IB^-$) in CTAX solutions are much larger amounts than those ($6{\times}10^{-6}$ M) of phosphinates, the rate constants of the dephosphorylations are largely influenced by change of the concentration of the ions, which means that the reactions are not followed by the pseudo first order kinetics. In comparison to effect of the counter ions of CTAX in the reactions, CTACl is more effective on the dephosphorylation of DPNPIN (or IPNPIN) than CTABr due to easier expelling of $Cl^-$ ion by $OH^-$(or $IB^-$) ion from the micelle, because of easier solvation $Cl^-$ ion by water molecules. The reactivity of IPNPIN with $OH^-$(or $IB^-$) is lower than that of DPNPIN. The reason seems that the 'bulky' isopropyl group of IPNPIN hinders the attack of the nucleophiles. The mechanism of reaction of IPNPIN with IB- ion concluded as 'nucleophilic' instead of 'general basic' by a trapping experiment and a measured kinetic isotope effect.
Journal of the Korean Crystal Growth and Crystal Technology
/
v.22
no.1
/
pp.5-10
/
2012
In general, the fabrications of the LEDs with mesa structure are performed grown by MOCVD method. In order to etch and separate each chips, the LEDs are passed the RIE and scribing processes. The RIE process using plasma dry etching occur some problems such as defects, dislocations and the formation of dangling bond in surface result in decline of device characteristic. The SAG method has attracted considerable interest for the growth of high quality GaN epi layer on the sapphire substrate. In this paper, the SAG method was introduced for simplification and fabrication of the high quality epi layer. And we report that the size of selective area do not affect the characteristics of original LED. The diameter of SAG circle patterns were choose as 2500, 1000, 350, and 200 ${\mu}m$. The SAG-LEDs were measured to obtain the device characteristics using by SEM, EL and I-V. The main emission peaks of 2500, 1000, 350, and 200 ${\mu}m$ were 485, 480, 450, and 445 nm respectively. The chips of 350, 200 ${\mu}m$ diameter were observed non-uniform surface and resistance was higher than original LED, however, the chips of 2500, 1000 ${\mu}m$ diameter had uniform surface and current-voltage characteristics were better than small sizes. Therefore, we suggest that the suitable diameter which do not affect the characteristic of original LED is more than 1000 ${\mu}m$.
Kim, Inn;Yu, Woo-Ik;Huh, Woo-Kung;Park, Young-Han;Park, Sam-Ock;Yu, Keun-bae;Choi, Byung-Seon
Journal of the Korean Geographical Society
/
v.29
no.1
/
pp.16-38
/
1994
The spatial structure of Korea has been changed drastically during the second half of this century. The events such as the Korean War and the resultant division of the Korean Peninsular into two Koreas, rapid industrialization and urbanization are the major causes among others for the spatial changes of the nation. The changes in turn have spawned a number of spatial problems. It is time, we argue, to diagnose how much the nation is now ill-structured, and to discuss of which directions the long-term spatial management be reoriented. A delphi survey was conducted during the early 1993 to fulfill such research needs. Questionnaires were distributed among geographers, planners, and high governmental officials throughout the nation. These 'experts of spatial problems' were requested to evaluate the past spatial policies and strategies, and to identify spatial and environmental problems at the national, regional and local levels. The survey included questions with regard to the spatial problems in North Korea too. A complementary literature survey in the fields of spatial sciences was accomplished as well in order to identify the major research interests and issues with regard to the nations's spatial structure. The delphi survey results indicatee that the present spatial structure: in relation to consumption, housing and economic activities is satisfactory in overall, while rather poor in terms of education, leisure and community activities. Most of the experts consider infrastructural improvements are urgent in the areas of roads, waste disposal facilitles, railroads, harbors, water supply and drainage systems. The over-concentration of economic, social and political function in the Seoul Metropolitan Region is perceived to be the most serious spatial problem in Korea. The long-term solutions suggested are strategies toward a more balanced regional development as well as toward a cleaner environment. The concensus among the experts for the short-term solution is the redistribution of population and industries from the Seoul Metropolitan Region to the intermediate and small cities. The land use policies and concurrent large-scale infrastructural projects are evaluated largely pertinent and desirable in general. It is, however, suggested that development projects be conducted in a more harmonious way with environment. The survey respondents suggest that the present environmental management policies should be reexamined critically. With regard to regional and local problems, transportation and pollutions are thought to be most serious in the Seoul Metropolitan Region, while employment opportunities, and information, education and health care services are most deprived in small cities and rural areas. The majority of the experts consider a city size of 250, 000-500, 000 population is desirable to live within. Respondents beileve that North Korea's physical environment is still not aggravated much whereas its infrastructural provisions are largely pool. The co-authors of this research figure a "environmentaly sound and spatially balanced Korean Penninsular" as the ideal type of spatial structure in Korea. The basic guidelines toward this ideal prototype are suggested: the recovery of spetial integrity, progressive restructuring of the nation, land uses geared to public welfare rather than private interests, and eco-humanistic approach in spatial policies.
Journal of the Microelectronics and Packaging Society
/
v.10
no.3
/
pp.19-27
/
2003
Surface finishes of PCB laminates are important in the solder joint reliability of flip chip package because the types and thicknesses of intermetallic compound(IMC), and compositions and hardness of solders are affected by them. In this study, effects of surface finishes of PCB on the low cycle fatigue resistance of Sn-based lead-free solders; Sn-3.5Ag, Sn-3.5Ag-XCu(X=0.75, 1.5), Sn-3.5Ag-XBi(X=2.5, 7.5) and Sn-0.7Cu were investigated for the Cu and Au/Ni surface finish treatments. Displacement controlled room temperature lap shear fatigue tests showed that fatigue resistance of Sn-3.5Ag-XCu(X=0.75, 1.5), Sn-3.5Ag and Sn-0.7Cu alloys were more or less the same each other but much better than that of Bi containing alloys regardless of the surface finish layer used. In general, solder joints on the Au/Ni finish showed better fatigue resistance than those on the Cu finish. Cross-sectional fractography revealed microcracks nucleation inside of the interfacial IMC near the solder mask edge, more frequently on the Cu than the Au/Ni surface finish. Macro cracks followed the solder/IMC interface in the Bi containing alloys, while they propagated in the solder matrix in other alloys. It was ascribed to the Bi segregation at the solder/IMC interface and the solid solution hardening effect of Bi in the $\beta-Sn$ matrix.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.