• Polymer(Korea)
• /
• v.37 no.4
• /
• pp.486-493
• /
• 2013

The structure, morphology, and physical properties of syndiotatic poly(vinyl alcohol) (s-PVA) gel spun fibers were investigated to prepare polymeric embolization coils. S-PVA was prepared by saponification of the poly(vinyl acetate)/poly(vinyl pivalate)(PVAc/PVPi) copolymer. The viscosity of s-PVA solutions showed shear thinning behavior and the solution formed a homogeneous phase. Based on shear viscosity change with concentration, the optimum dope concentration was selected as 13 wt%, after which s-PVA fibers were spun and the solvent was removed. The fibers were then drawn with a maximum draw ratio of 15. A polymeric embolization coil was made of the s-PVA gel-spun fibers. The fibers were wound densely onto rigid rod and then annealed at different annealing temperatures. The polymeric embolization coil annealed at $200^{\circ}C$ was similar to metallic coils and its shape was maintained well after extension. Overall, gel-spun PVA fibers performed well for the preparation of primary and secondary coils to replace metallic coils.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.33 no.2
• /
• pp.281-289
• /
• 2006

Topical fluoride application for children is a widely performed procedure in the field of Pediatric Dentistry for its dental caries prevention effects However, it is recently recognized as having some unwanted effects on several esthetic restorative materials, the author immersed glass ionomer cement, compomer and composite resin specimens in APF gel and measured the surface roughness and also, examined the specimens under the scanning eletron microscope. The followings are the results: 1. In the specimens of glass ionomer cement and compomer, APF gel 4 minute immersion group and pH cycling group show statistically significant increased surface roughness than artificial saliva immersion group (p<0.01). 2. There was no statistically significant surface roughness for composite resin in all group (p>0.05). 3. When the specimens were examined under scanning electron microscope, the surface change were in the order of glass ionomer cement, compomer, composite resin and also in the order of pH cycling group, APF gel 4 minutes immersion group, artificial saliva immersion group.

• Journal of Food Hygiene and Safety
• /
• v.3 no.2
• /
• pp.75-81
• /
• 1988

Various methods such as lel-mtration on Sephadex G-SO, 75, 100 Sephacry, and Ultro gel, and lon-exchanle chromatoaraphy on Amberilte and carboxymethyl (CM)-cellulose, and Fast Protein liquid Chromatolraphy (FPLC) were applied for the purification of enterotoxin B from Staphylococcus aureus ATCC 14458 and compared one another. lon-exchanle chromatography on Amberllte resin was good enough to remove non-entrotoxln materials in culture, convlnient to use and fast although tbe purity was less tban 70%. However, CM-cellulose showed to be better purity and yield tban those of Amberilte resin. The yields of these two resins for ion-exchange cbromatograpby were about 70% and 75%, respectively. When the gel-filtration methods on Sepbadex G-50, 75, 100, Sepbacryl, and Ultro lei were applied, the purities were about 90%. FPLC was found to be tbe most efficient metbod in terms of purity (96%) and speed. For the purification of sample with large volume, particularly, tbe combined metbod, gel-mtration after Amberlite can be also used efficiently. Tbe purified toxin was found to be identical to type B enterotoxin used for reference standard by Oucbterlony immunodiffusion test.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2006.11a
• /
• pp.7.2-7.2
• /
• 2006

• Korean Chemical Engineering Research
• /
• v.46 no.2
• /
• pp.310-315
• /
• 2008

Organic-inorganic hybrid solutions were made using glycidoxypropyl trimethoxysilane (GPTMS) and vinyltriethoxysilane (VTES) as starting materials by sol-gel method. Photochromic coating solutions were prepared by mixing the solution of photochromic dye (spiropyran) dissolved in ethylacetate with the organic-inorganic hybrid solutions. Photochromic films were prepared on polycarbonate sheets by spin coating and cured for 2 h at $100^{\circ}C$. The resulting films exhibited a reversible color change upon irradiation with UV light from transparent to blue. The color-fading speed and pencil hardness of the coating films increased with increasing the GPTMS content in the coating solutions.

• Journal of Electrochemical Science and Technology
• /
• v.2 no.2
• /
• pp.103-109
• /
• 2011

Nanocrystalline $LiFePO_4$ powders were prepared at 660-$670^{\circ}C$ in an Ar atmosphere using two different synthetic routes, solid-state and sol-gel. Both materials showed well-developed XRD patterns without any impurity peaks. Particles composed in the range of 200-300 nm from the solid-state method, and 50-100 nm from the sol-gel method, were confirmed through scanning electron microscopy and dynamic light scattering. The $LiFePO_4$ obtained by the sol-gel method offered a high discharge capacity (153 mAh/g) and stable discharge behavior, even at elevated temperatures (50 and $60^{\circ}C$), whereas poor electrochemical performance was observed from the solid-state method. Rate capability studies for sol gel-derived $LiFePO_4$ ranged from 0.2 to 30 C, which revealed excellent retention over 70 cycles with a 99.9% capacity.

• Applied Chemistry for Engineering
• /
• v.5 no.6
• /
• pp.1009-1015
• /
• 1994

Monodisperse porous poly(styrene-co-divinylbenzene)(St-DVB) gel and poly(acrylonitrile-co-ethylene dimethacrylate)(AN-EDMA) gel have been prepared by seed polymerization using polystyrene seeds, which were prepared by dispersion polymerization. The St-DVB and AN-EDMA gels had a narrow size distribution and pores suitable for packing materials of HPLC. The columns packed with these gels were proved to have high efficiency for GPC or HPLC coluuns. Adsorption properties of $Cu^{2+}$, $Cd^{2+}$ and ${UO_2}^{2+}$ ions on AAN-EDMA gel prepared from amidoximation of AN-EDMA gel were also determined.

• Journal of the Speleological Society of Korea
• /
• no.76
• /
• pp.49-55
• /
• 2006

The submicron $YBa_2Cu_3O_x$ powder was prepared by the sol-gel method. The particle size is distributed from 0.2 to 1.0 ${\mu}m$, which benefits to eliminate the micro-cracks formed in the $YBa_2Cu_3O_x$ films deposited by electrophoresis. The powder was single phase of $YBa_2Cu_3O_x$ examined by X-ray diffraction. In the sol-gel process the citrate gel was formed from citric acid and nitrate solution of $Y_2O_3$, $Ba(NO_3)_2$ and CuO. When pH values were adjusted to 6.4-6.7, $Ba(NO_3)_2$ could be dissolved in the citrate solution completely. Appropriate evaporative temperature of the sol-gel formation is discussed. Acetone is used as electrophoreticsolution, in which some water and iodine (0.2 g/1) and polyethylene glycol (2 vol. %) are added. The concentrations of $YBa_2Cu_3O_x$ powders is 20g/l. The thickness of deposited film could be more than 50 ${\mu}m$ in 3 minutes of depositing time. The most EPD films could be 90K zero resistance and the Jc values were over 1000A/cm2 (0 H, 77 K).

• Journal of the Korean Electrochemical Society
• /
• v.3 no.1
• /
• pp.15-18
• /
• 2000

Transparent conducting tin (IV) oxide thin films have been studied and developed for the electrode materials of solar cell substrate. Fabrication of tin oxide thin films by sol-gel method is process development of lower cost photovoltaic solar cell system. The research is focused on the establishment of process conditions and development of precursor. The precursor solution was made of tin isopropoxide dissolved in isopropyl alcohol. The hydrolysis rate was controlled by addition of triethanolamine. Dip and spin coating technique were applied to coat tin oxide on borosilicate glass. The resistivity of the thin film was lower than 0.01-cm and the transmittance is higher than $90\%$ in a visible range.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.11a
• /
• pp.137-137
• /
• 2003

Optical amplificator have been used to compensate the losses in the optical signal transmission and processing. Today, there has been increasing demand for the very low cost optical amplifier. Sol-gel offers considerable potential both low cost manufacture, and for great flexibility in materials composition and structure. In addition, the sol-gel process is a very attractive method for producing porous materials with controlled structure. In this work, we present the potoluminescence properties of Er doped A1$_2$O$_3$/SiO$_2$ films. Erbium doped alumina nano sol was prepared by Al(NO$_3$)$_3$.9$H_2O$ and Er(NO$_3$)$_3$.5$H_2O$ through hydrolysis and peptization, and then GPS (3-Glycidoxypropyltrimethoxysilane) was added into Er doped alumina nano sol for organic- inorganic hybridization. Er doped A1$_2$O$_3$/SiO$_2$ film was obtained by spin coating, dip coating and thermal treatment from 30$0^{\circ}C$~120$0^{\circ}C$, and there were crack-free after thermal treatment. The thickness of film was measured SEM, and the porosity of film was characterized by BET and TGA. The crystal phase of Er doped A1$_2$O$_3$/SiO$_2$ were determined by XRD. Finally, the photoluminescence properties of Er doped A1$_2$O$_3$/SiO$_2$ films will be discuss with the consideration of porosity and crystallity.