• Journal of Applied Biological Chemistry
• /
• v.42 no.3
• /
• pp.125-129
• /
• 1999

The changes in gel characteristics of soy protein and succinylated soy protein due to various specific interaction-altering reagents which affect the formation and textural properties of gels, were studied. The reagents were added to 15% soy protein solutions prior to heat treatment. Succinylated soy protein formed harder gel without the addition of reagents. Hardly no gels were formed with urea, indicating that hydrogen bonds significantly contributed to the formation and hardness of the gel and the effects of urea on the hardness of succinylated soy protein gel were more significant. Disulfide bonds were important in the formation of hard gels whether they were succinylated or not, but the contributions of hydrophobic interactions to gel hardness were relatively insignificant. The hardness reducing effects of NaCl and NaSCN were more significant in succinylated soy protein gel. As such, electrostatic interactions were important for succinylated soy protein to form hard gel but not for unmodified soy protein.

• Proceedings of the SCSK Conference
• /
• 2003.09a
• /
• pp.469-479
• /
• 2003

A novel branched wax has been developed for the control of the hardness of oil-wax gels. Using this wax, glossier application and smoother texture but tough lipstick can be obtained. Oil-wax gels are oily solids composed of liquid and crystalline solid oils (waxes). They are widely used in various cosmetic products, especially lipsticks. The control of gel hardness is one of the most important techniques in improvement of the lipstick quality. Addition of small amounts of commercial branched paraffin wax (e.g. microcrystalline wax, b-PW) to n-paraffin wax (n-PW) has been commonly used to increase gel hardness. However, gel hardness is very sensitive to the quantity of b-PW and the gel obtained is not always hard enough for practical use. In this study we examined the relationship between the gel hardness and the properties of the wax crystal in the gel. We have found that, when b-PW is added to n-PW, the wax crystal size becomes smaller (hardening the gels) and its crystallinity is decreased (softening the gels) simultaneously. Considering this result, we have developed a novel branched wax, Bis(polyethylenyl)- tetramethyldisiloxane (named ESE). ESE molecules are composed of a central tetramethyldisiloxane unit (branch unit) with polyethylene units at both ends. The central unit may suppress crystal growth while the ends are expected to prevent a decrease in wax crystallinity during crystallization. When ESE is added to n-PW, the wax crystal obtained becomes smaller without decreasing in crystallinity; consequently, the gel hardness is dramatically increased. By using ESE, the total amount of wax in a lipstick can be decreased by 30％ without spoiling the stick toughness, thereby achieving glossy application and smooth texture.

• Korean Journal of Poultry Science
• /
• v.17 no.2
• /
• pp.127-133
• /
• 1990

This study was undertaken to find out the effect of heating time and temperature, pH and NaCl concentration on the heat stability of egg albumen gel during heat treatment. With the transient decrease at 110-$130^{\circ}C$, hardness of heat-set albumen gel was increased as the heating temperature increased. The cohesiveness showed similar trend as well. The lightness was decreased while the yellowness was increased as the heating time and temperature increased. Heat-set albumen gel showed maximum hardness at pH 4.5-5.0 and pH 9.0 High heat treatment($120^{\circ}C$, 30min) showed higher hardness at alkaline range compared to low heat treatment($96^{\circ}C$, 30min.). Color of the albumen gel was relatively dark at acidic range and bright at alkaline range. High heat treatment caused darker albumen gel at alkaline range and brighter albumen gel at acidic range. The addition of NaCl increased hardness and cohesiveness of the albumen gel and improved the lightness after high heat treatment regardless of NaCl concentration.

• Journal of Korean society of Dental Hygiene
• /
• v.10 no.4
• /
• pp.757-764
• /
• 2010

Objectives : The fluoride coating for caries prevention and strengthen enamel use NaF(sodium fluoride, Junsei Chemical Co., Ltd, Japan) 2% gel, SnF2(stannous fluoride, SIGMA-ALDRICH Gmbh, USA)8% gel and APF(acidulated phosphate fluoride, Sultan health care, USA) 1.23% gel. Methods : After put the enamel piece in these fluoride compound gel, we observed density level. And after measuring the vickers hardness, Got the following conclusions. Results : 1. After settling in the APF 1.23% during 6 days, we observed high density level of enamel surface using 250 magnification scanning microscope. The vacuum of surface packed (in) like sardines. 2. After settling in the APF 1.23% during 6 days, we observed reducing the space between the cluster of enamel surface using 50,000 magnification scanning microscope. 3. The vickers hardness change was very much on the all kinds of fluoride compound gel[2% NaF(sodium fluoride)gel, 8% SnF2(stannous fluoride) gel, 1.23% APF(acidulated phosphate fluoride)gel]. It's all because of reducing the space between the cluster of enamel surface(p<0.001). Conclusions : The vickers hardness change was very much on the all kinds of fluoride compound. It's all because of reducing the space between the cluster of enamel surface.

• Food Science and Preservation
• /
• v.5 no.1
• /
• pp.65-71
• /
• 1998

The changes in gel characteristics of soy protein as a result of various reagents that alter specific interactions which affect the formation and textural properties of gels, were studied. The reagents were added to 15% soy protein solutions prior to heat treatment. The gels were not formed with urea, indicating that hydrogen bonds significantly contributed to the formation and hardness of soy protein gel. Hydrophobic interactions and disulfide bonds compensated for hydrogen bonds and the contributions of electrostatic interactions to gel hardness are relatively insignificant. The farce primarily responsible for gel cohesiveness appeared to be disulfide bonds, because a significant decrease in cohesiveness was found only with the presence of N-ethylmaleimide. Adhesiveness decreased only with the addition of urea, and thus the contribution of hydrogen bonding to adhesiveness of gel could be concluded to be resent. However, adhesiveness was suggested to be interpreted not only wile molecular forces involved in gel formation but also with hydration properties of protein.

• Food Science and Biotechnology
• /
• v.15 no.3
• /
• pp.409-412
• /
• 2006

Interrelationship between results of large deformation (texture profile analysis, TPA) test and small deformation (creep) test on ohmic heated surimi gel, water-bath heated surimi gel, and commercial fish gel products (kamabokos) was examined. Creep test revealed ohmic heated gels have higher elastic modulus and viscosity values than water-bath heated ones, with differences of elastic modulus and viscosity between ohmic and water-bath heated gels being 18 and 28.5%, respectively. These differences were reflected in the higher hardness, cohesiveness, and chewiness values of ohmic heated gels in TPA. In TPA test, the differences of hardness and chewiness between ohmic heated gel and water-bath heated gel were 29.3 and 38.7%, respectively. It was concluded that with proper experimental design, the small deformation creep test which gives molecular level deformation data can be related to the large deformation TPA test indicating the sensory textural properties.

• Korean journal of food and cookery science
• /
• v.7 no.2
• /
• pp.19-23
• /
• 1991

This study was conducted to compare the characteristics of reference starch gel and 5 additives-adding corn starch gels (agar, CMC, pectin, casein, gelatin). The sensory evaluation, textural analysis by Instron Universal Testing Machine were carried out The results were as follows: 1. In sensory evaluation. \circled1 The hardness of agar was significantly higher than that of control and the hardness of pectin was significantly lower than that of control. \circled2 The adhesiveness of CMC and pectin was significantly higher than that of control, and the adhesiveness of agar was significantly lower than that of control. \circled3 In acceptability, CMC and pectin were significantly higher than control and the other samples were not significantly different from control. 2. In textural analysis by Instron. \circled1 The hardness of agar was significantly higher than that of control and the hardness of the other samples was significantly lower than that of control. \circled2 The cohesiveness of agar and casein was significantly higher than that of control and the cohesiveness of gelatin was significantly lower than that of control. 3. In sensory evaluation or instrumental analysis by Instron. It was thought that the best sample-classifying characteristic was hardness.

• Journal of the Korean Home Economics Association
• /
• v.23 no.1
• /
• pp.33-47
• /
• 1985

The rheological properties of acorn starch gel were investigated in region of small and large deformation. The properties were compared with those of potato and wheat starch gel. On the physical characteristics and the effect of tannin contents of acorn starch were examined. RESULTS : 1. X-ray diffractogram of acorn starch showed C-type and its granules swelled gradully with heating. 2. Hardness, brittleness and both small and large deformation of the acorn starch gel were remarkably large, also the concentration dependence of the acorn starch gel could be recognized in small deformation and hardness. 3. The Young's modulus of Hookean body in small deformation and the rupture stress in large deformation differed obviously from the parameters of rheological properties in various gels. 4. It was found that the selling power, viscosity and rhelogical properties were affected obviously by the tannin.

• Korean journal of food and cookery science
• /
• v.19 no.6
• /
• pp.758-764
• /
• 2003

This study was performed to determine the quality characteristics of mixed polysaccharide gels made from kcarrageenan and locust bean gum with various kiwifruit content after freeze-thawing. The syneresis, rupture properties, TPA properties and sensory properties of the mixed polysaccharide gels with various kiwifruit contents after freeze-thawing were measured. The syneresis of the gel with various kiwifruit contents by freeze-thawing was not significantly different, whereas repeating freeze-thawing resulted in remarkable increase in the syneresis of the mixed polysaccharide gels with 5％, 20％ and 40％ kiwifruit. In terms of the rupture properties, the rupture stress, rupture energy and rupture strain decreased with increasing kiwifruit content after freeze-thawing. In terms of the TPA properties, the adhesiveness, hardness and chewiness increased and the cohesiveness decreased with increasing kiwifruit content after freeze-thawing. The rupture properties, springiness and cohesiveness of the gel by freeze-thawing were lower than those of the gel stored in the refrigerator. In contrast, the gumminess, hardness and chewiness of the gel after freeze-thawing were higher than those of the gel stored in the refrigerator. The results showed that the gel became crumbly and tough as a result of freeze-thawing. In the sensory evaluation, He overall acceptability of the gel after freeze-thawing was highest at the 30％ kiwifruit content, and differences in the sensory properties between the gel after freeze-thawing and that stored in the refrigerator were small. Therefore, mixed polysaccharide gels with kiwifruit after freeze-thawing could be useful despite the small decrease in quality.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.29 no.1
• /
• pp.40-43
• /
• 2016

Transparent color coating films were fabricated on a glass substrate by using sol-gel hybrid binder and organic dye. Sol-gel hybrid binder coating film fabricated with PTMS of 0.03 mole showed a very high pencil hardness of 9 H. As the withdrawal speed increased from 1.0 mm/s to 5.0 mm/sec, The yellowness ($b^*$) of coating glass also gradually increased. The transmittance of yellow color coating glass was 82.6% and the haze of coating glass was 0.35%. Red and blue color coating glasses also showed the high transmittance of 62.4% and 80.6% respectively. The surface hardness of color coating films was 6 H.