• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 추계학술대회 논문집 Vol.19
• /
• pp.149-150
• /
• 2006

A ZnO nanowire-based FET is fabricated m this study on a flexible substrate of PES. For the flat and bent flexible substrates, the current ($I_D$) versus drain-source bias voltage ($V_{DS}$) and $I_D$ versus gate voltage ($V_G$) results are compared. The flat band was Ion/Ioff ratio of ${\sim}10^7$, a transconductance of 179 nS and a mobility of ~10.104 cm2/Vs at $V_{DS}$ =1 V. Also bent to a radius curvature of 0.15cm and experienced by an approximately strain of 0.77 % are exhibited an Ion/Ioff ratio of ${\sim}10^7$, a transconductance of ~179 nS and a mobility of ${\sim}10.10 cm^2/Vs$ at $V_{DS}$ = 1V. The electrical characteristics of the FET are not changed very much. although the large strain is given on the device m the bent state.

• Journal of electromagnetic engineering and science
• /
• 제16권4호
• /
• pp.199-205
• /
• 2016

We present a novel schematic using a 3-dB coupler to transmit radiofrequency (RF) power to two receivers selectively. Whereas previous multiple receiver supporting schemes used hardware-switched methods, our scheme uses a soft power-allocating method, which has the advantage of variable power allocation in real time to each receiver. Using our scheme, we can split the charging area and focus the RF power on the targeted areas. We present our soft power-allocating method in three main points. First, we propose a new power distribution hardware structure using a FPGA (field-programmable gate array) and a 3-dB coupler. It can reconfigure the transmitting power to two receivers selectively using accurate FPGA-controlled signals with the aid of software. Second, we propose a power control method in our platform. We can variably control the total power of transmitter using the DC bias of the drain input of the amplifier. Third, we provide the possibility of expansion in multiple systems by extending these two wireless power transfer systems. We believe that this method is a new approach to controlling power amplifier output softly to support multiple receivers.

• 한국재료학회지
• /
• 제33권12호
• /
• pp.511-516
• /
• 2023

Amorphous In-Ga-Zn-O (a-IGZO) thin film transistors (TFTs) with a coplanar structure were fabricated to investigate the feasibility of their potential application in large size organic light emitting diodes (OLEDs). Drain currents, used as functions of the gate voltages for the TFTs, showed the output currents had slight differences in the saturation region, just as the output currents of the etch stopper TFTs did. The maximum difference in the threshold voltages of the In-Ga-Zn-O (a-IGZO) TFTs was as small as approximately 0.57 V. After the application of a positive bias voltage stress for 50,000 s, the values of the threshold voltage of the coplanar structure TFTs were only slightly shifted, by 0.18 V, indicative of their stability. The coplanar structure TFTs were embedded in OLEDs and exhibited a maximum luminance as large as 500 nits, and their color gamut satisfied 99 % of the digital cinema initiatives, confirming their suitability for large size and high resolution OLEDs. Further, the image density of large-size OLEDs embedded with the coplanar structure TFTs was significantly enhanced compared with OLEDs embedded with conventional TFTs.

• ETRI Journal
• /
• 제39권2호
• /
• pp.292-299
• /
• 2017

We propose pulse-mode dynamic $R_on$ measurement as a method for analyzing the effect of stress on large-scale high-power AlGaN/GaN HFETs. The measurements were carried out under the soft-switching condition (zero-voltage switching) and aimed to minimize the self-heating problem that exists with the conventional hard-switching measurement. The dynamic $R_on$ of the fabricated AlGaN/GaN MIS-HFETs was measured under different stabilization time conditions. To do so, the drain-gate bias is set to zero after applying the off-state stress. As the stabilization time increased from $ 0.1{\mu}s$ to 100 ms, the dynamic $R_on$ decreased from $160\Omega$ to $2\Omega$. This method will be useful in developing high-performance GaN power FETs suitable for use in high-efficiency converter/inverter topology design.

• 한국통신학회논문지
• /
• 제27권4B호
• /
• pp.365-371
• /
• 2002

본 논문에서는 전자선 묘화 장비를 이용하여 게이트 길이가 0.2 $\mu\textrm{m}$ 이하인 밀리미터파용 전력 PHEMT 소자를 제작하고 DC 특성과 주파수 특성 그리고 전력 특성을 측정하고 분석하였다. PHEMT의 제작에 사용된 단위공정은 저 저항 오믹 접촉, 에어 브릿지 및 후면 가공 공정기술 등을 이용하였다. 제작된 전력용 PHEMT는 35 GHz의 중심주파수에서 4 dB의 S21 이득과 317 mS/mm의 최대 전달컨덕턴스 그리고 62 GHz의 차단주파수와 12G GHz의 최대 공진주파수를 나타내었다. 또한 측정된 전력 특성은 35.5 %의 드레인 효율과 16 dB의 최대 출력전력 그리고 4 dB의 전력 이득을 나타내었다.

• 한국전자파학회논문지
• /
• 제10권2호
• /
• pp.169-179
• /
• 1999

본 논문에서는 선형성이 우수한 MIC형태의 GaAs MESFET 저항성 혼합기를 설계하였다. 설계된 저항성 혼합기는 채널저항을 이용하기 위해 게이트단에만 바이어스 전압을 인가하였으며 LO 신호를 게이트단에 입 력시키고 드레인단에는 LO- RF간의 적절한 격리도를 얻기 위하여 삽입된 7 -jXlle hairpin 대역통과 여파기를 통하여 RF 신호를 가하여서 소오스단에서 단락회로와 저역통과 여파기를 통해 IF 신호를 얻는 것이다 .. LO 신호와 RF 신호에 대한 간략화된 등가회로를 추출하여 변환손실을 계산하였으며 하모닉 발란스 해석의 결과 와 비교하였다. 제작된 S-band 수신용 혼합기의 변환손실은 7 -jXlle hairpin 대역통과 여파기의 3.0-3.4 dB 정 도의 삽입손실을 고려하여 8.2 -10.5 dB로 얻을 수 있었고, 왜곡 특성에서 IP3in는 26.5 dBm의 선형적인 특 성을 Vg=-0.85~-1.0 V에서 얻을 수 있었다.

• 한국정보통신학회논문지
• /
• 제10권1호
• /
• pp.111-116
• /
• 2006

본 연구에서는 비정질 실리콘 박막 트랜지스터를 스위칭소자로 포토센서를 구동 하는 방식의 이미지 센서를 구현하고자 한다. 먼저 PECVD(Plasma Enhanced Chemical Vapor Deposition) 진공 증착장비로 최적의 비정질실리콘 박막을 형성하고, 이 박막을 이용하여 스위칭소자인 박막트랜지스터와 광전변환소자인 광다이오드를 제조한다. 또한 이들을 결합하여 이미지 센서를 형성하고 그 특성 및 동작을 분석하고 최적의 동작특성을 이끌 수 있는 밀착이미지 센서를 제조한다. 제작한 이미지 센서를 측정한 결과 광전변환소자인 photodiode는 암전류의 경우 $\~10^{-l2}A$정도였으며, 광전류 $\~10^{-9}A$정도로서 Iphoto/Idark ${\ge}10^3$ 이상을 이루어 좋은 광전변환 특성을 갖고 있었다. 또한 a-Si:H TFT의 경우 Ioff ${\le}10^{-l2}A$, Ion ${\le}10^{-6}A$ 으로서 Ion/Ioff ${le}10^6$ 이상을 나타냈으며 Vth는 $2\~4$ volts였고, Id는 수 ${\mu}A$ 정도로 photodiode를 스위치하기에 충분한 전류-전압특성을 나타내고 있다. 이미지 센서 전체 동작 특성을 측정하기 위하여 photodiode의 ITO쪽에 -5volts의 역 bias를 가한 상태에서 TFT의 gate에 $70\;{\mu}sec$의 pulse를 가하여 photodiode에서 생성된 광전류 와 암전류를 측정하였다. 이렇게 하여 측정된 전압은 암상태에서 수십 mvolts이고, 광상태에서는 수백 mvolts로 나타나 우수한 이미지센서 특성을 갖고 있음을 확인하였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.265.2-265.2
• /
• 2016

Oxide thin film transistors (TFTs) have attracted considerable interest for gate diver and pixel switching devices of the active matrix (AM) liquid crystal display (LCD) and organic light emitting diode (OLED) display because of their high field effect mobility, transparency in visible light region, and low temperature processing below $300^{\circ}C$. Recently, oxide TFTs with polycrystalline In-Ga-O(IGO) channel layer reported by Ebata. et. al. showed a amazing field effect mobility of $39.1cm^2/Vs$. The reason having high field effect mobility of IGO TFTs is because $In_2O_3$ has a bixbyite structure in which linear chains of edge sharing InO6 octahedral are isotropic. In this work, we investigated the characteristics and the effects of oxygen partial pressure significantly changed the IGO thin-films and IGO TFTs transfer characteristics. IGO thin-film were fabricated by rf-magnetron sputtering with different oxygen partial pressure ($O_2/(Ar+O_2)$, $Po_2$)ratios. IGO thin film Varies depending on the oxygen partial pressure of 0.1%, 1%, 3%, 5%, 10% have been some significant changes in the electrical characteristics. Also the IGO TFTs VTH value conspicuously shifted in the positive direction, from -8 to 11V as the $Po_2$ increased from 1% to 10%. At $Po_2$ was 5%, IGO TFTs showed a high drain current on/off ratio of ${\sim}10^8$, a field-effect mobility of $84cm^2/Vs$, a threshold voltage of 1.5V, and a subthreshold slpe(SS) of 0.2V/decade from log(IDS) vs VGS.

• 대한전자공학회논문지SD
• /
• 제39권1호
• /
• pp.83-88
• /
• 2002

HFET 소자의 선형성과 게이트-트레인 항복특성을 향상시키기 위해 부분채널 도핑된 Al/sub 0.25/Ga/sub 0.75/As/In/sub 0.25/Ga/sub 0.75/As/Al/sub 0.25/Ga/sub 0.75/As 이종접합 구조를 갖는 FET를 제안하였다. 제안된 HFET는 게이트 전극 아래로 도핑되지 않은 AlGaAs 진성공급층을 두어 -2OV 의 높은 항복전압을 얻었다. 또한 소자의 InGaAs 채널에 부분 도핑을 실시하여, 균일 채널 도핑을 실시한 경우보다 향상된 선형성을 유도하였고, 2차원 전산모사 견과와 제작 및 측정결과를 통해 선형성의 향상을 확인하였다. 본 실험에서 제안된 HFET소자는 DC측정 결과와 고주파측정 결과 모두에서 기존의 FET소자들에 비해 향상된 선형성을 나타내었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.199-199
• /
• 2011

Recently, Thin film transistors (TFTs) with amorphous oxide semiconductors (AOSs) can offer an important aspect for next generation displays with high mobility. Several oxide semiconductor such as ZnO, $SnO_2$ and InGaZnO have been extensively researched. Especially, as a well-known binary metal oxide, tin oxide ($SnO_2$), usually acts as n-type semiconductor with a wide band gap of 3.6eV. Over the past several decades intensive research activities have been conducted on $SnO_2$ in the bulk, thin film and nanostructure forms due to its interesting electrical properties making it a promising material for applications in solar cells, flat panel displays, and light emitting devices. But, its application to the active channel of TFTs have been limited due to the difficulties in controlling the electron density and n-type of operation with depletion mode. In this study, we fabricated staggered bottom-gate structure $SnO_2$-TFTs and patterned channel layer used a shadow mask. Then we compare to the performance intrinsic $SnO_2$-TFTs and doping hafnium $SnO_2$-TFTs. As a result, we suggest that can be control the defect formation of $SnO_2$-TFTs by doping hafnium. The hafnium element into the $SnO_2$ thin-films maybe acts to control the carrier concentration by suppressing carrier generation via oxygen vacancy formation. Furthermore, it can be also control the mobility. And bias stability of $SnO_2$-TFTs is improvement using doping hafnium. Enhancement of device stability was attributed to the reduced defect in channel layer or interface. In order to verify this effect, we employed to measure activation energy that can be explained by the thermal activation process of the subthreshold drain current.