• 제목/요약/키워드: gaseous fuel

검색결과 205건 처리시간 0.025초

프로톤 전도성 SrCe0.95Gd0.05O3-α-Ce0.9Gd0.1O2-β 복합체 멤브레인의 수소투과 특성 (Hydrogen Permeation of SrCe0.95Gd0.05O3-α-Ce0.9Gd0.1O2-β Proton-Conducting Ceramic Membranes)

  • 김환수;유지행;신민재
    • 한국수소및신에너지학회논문집
    • /
    • 제22권2호
    • /
    • pp.161-167
    • /
    • 2011
  • Proton conductors have attracted considerable attention for solid oxide fuel cell (SOFC), hydrogen pump, gas sensor, and membrane separators. Doped $SrCeO_3$ exhibits appreciable proton conductivity in hydrogen-containing atmosphere at high temperature. However commercial realization has been hampered due to the reactivity of $SrCeO_3$ with $CO_2$. The chemical stability and proton conductivity are dependent on dopant type. The purpose of this work is to investigate chemical stability of $SrCe_{0.95}Gd_{0.05}O_{3-\alpha}-Ce_{0.9}Gd_{0.1}O_{2-\beta}$ composites in $CO_2$ and $H_2$ gases. Thermogravimetric analysis (TGA) was performed in gaseous $CO_2$ and electrical conductivity of the composites were also measured between 500 and $900^{\circ}C$ in air and $H_2$ atmosphere. $SrCe_{0.95}Gd_{0.05}O_{3-\alpha}-Ce_{0.9}Gd_{0.1}O_{2-\beta}$ composite membranes showed good chemical stability of in $CO_2$ atmosphere and high conductivity at hydrogen condition. The hydrogen permeation of $SrCe_{0.95}Gd_{0.05}O_{3-\alpha}-Ce_{0.9}Gd_{0.1}O_{2-\beta}$ composite membranes was investigated as a function of volumetric content of $SrCe_{0.95}Gd_{0.05}O_{3-\alpha}$. The $SrCe_{0.95}Gd_{0.05}O_{3-\alpha}-Ce_{0.9}Gd_{0.1}O_{2-\beta}$(6:4) membrane with a thickness of 1.0 mm showed the highest hydrogen permeability with the flux reaching of 0.12 $ml/min{\cdot}cm^2$ at $800^{\circ}C$ in 100%$H_2/N_2$ as feed gas.

지능형 무선통신용 가스 센서 모듈 구현 (The Realization on GAS Sensor Module for Inteligent Wireless Communication)

  • 김효찬;원영수;조형래
    • 한국ITS학회 논문지
    • /
    • 제11권6호
    • /
    • pp.123-132
    • /
    • 2012
  • 가스센서는 그 용도에 따라서, 자동차용(배출가스, 연료혼합 가스, 산소, 분진), 농수산 식품산업용(신선도, 저장, $CO_2$, 습도, $NH_3$, 질소산화물 가스, 유기가스, 농약 및 살충제로부터 방출되는 유독가스), 산업 의료용(석유화학제품 가스, 수소, 산소, 유독가스), 군사용(화학무기 가스), 환경 측정용(CO를 비롯한 황과 질소 등으로 구성된 대기오염가스), 가정용(LNG, LPG, 부탄, 실내공기, 습도) 등으로 매우 다양하게 사용하고 있다. 산업 현장의 유해물질 종류는 약 700종으로 알려져 있으며 이들 중 대다수의 물질은 일반적인 환경 조건에서 가스 형태로 존재한다. 본 연구에서는 이러한 유독 가스들 중에서 차량 내부 등의 밀폐된 공간에서 발생하기 쉬운 중요한 탄소(CO), 이산화탄소($CO_2$), 암모니아 ($NH_3$)의 세 가지 가스를 검출하는 휴대용 가스센서 모듈을 구현하고자 한다. 유독 가스 중에서도 가장 인명 사고의 중요한 요소인 NH3, $CO_2$, CO의 3종류 가스를 검출하는 다중 가스검출 센서에 대해 연구한다.

다수호기 원전 운영에 따른 원전 해체 작업자에 대한 방사선학적 영향 (Radiological Impact on Decommissioning Workers of Operating Multi-unit NPP)

  • 이은희;김창락
    • 방사성폐기물학회지
    • /
    • 제17권1호
    • /
    • pp.107-120
    • /
    • 2019
  • 다수호기 부지에 위치한 원전의 해체는 인근에 위치한 운영중인 원전으로 인해 작업자에게 추가적인 방사선 피폭 위험을 야기할 수 있다. 따라서 인근의 운영중인 다수호기 원전에 의한 해체 작업자에 대한 피폭 선량 평가가 필요하다. ENDOS프로그램은 한국원자력연구원(KAERI)에서 개발된 선량평가 전산코드로, 하위 프로그램으로 대기 확산 평가 프로그램인 ENDOS-ATM과 기체 방사성 배출물에 의한 피폭 선량 계산을 수행하는 ENDOS-G가 있다. 이 프로그램들을 이용하여 고리 1호기 해체작업자에 대한 다수호기 원전 운영에 의한 피폭 선량을 계산한 결과, $2.31{\times}10^{-3}mSv{\cdot}y^{-1}$로 일반인에 대한 피폭선량 기준치인 $1mSv{\cdot}y^{-1}$에 비교해 보았을때 큰 영향이 없을 것이라는 판단에 도달할 수 있었다. 앞으로 예상되는 국내 해체 원전의 경우 모두 다수호기 부지에 위치하여 이 연구 방법과 결과가 활용될 수 있을 것이라고 기대한다.

압축 수소 충전 공정 해석을 위한 대류 열전달 계수 비교 분석 (Comparative Investigation of Convective Heat Transfer Coefficients for Analyzing Compressed Hydrogen Fueling Process)

  • 서효민;박병흥
    • 한국가스학회지
    • /
    • 제27권3호
    • /
    • pp.123-133
    • /
    • 2023
  • 상용 수소연료전지 차량은 기체 수소를 고압으로 압축하여 차량 내 저장 탱크로 저장하는 방식으로 충전이 진행된다. 이러한 압축 과정은 기체의 온도 상승을 유발하며, 저장 탱크의 안전성을 확보하기 위해 온도는 제한된다. 따라서 이러한 온도 상승을 설명하기 위한 열전달 모델이 필요하다. 열전달 모델은 대류 열전달 현상을 포함하며 정확한 대류 열전달 계수 추산이 요구된다. 본 연구에서는 수소 충전 과정에서의 대류 열전달 계수를 물리적 현상을 고려한 다양한 상관관계식을 이용하여 계산하고 비교 분석하였다. 수소 충전 과정은 디스펜서로부터 탱크 입구까지의 충전라인과 차량 내 저장 탱크로 분류하였고, 각각의 내부 및 외부에서의 대류 열전달 계수를 질량 유량, 직경, 온도와 압력 등 공정 변수에 따라 추산하였다. 그 결과, 충전라인 내부의 경우 저장 탱크 내부에서보다 대류 열전달 계수가 약 1000배 크게 나타났고, 충전라인 외부의 경우 저장 탱크 외부에서보다 대류 열전달 계수가 약 3배 크게 나타났다. 마지막으로 각 과정에서의 대류 열전달 계수를 종합 분석한 결과 전체 수소 충전 과정에서 저장 탱크 외부에서의 열전달 계수가 가장 낮아 열전달 현상을 지배하는 것으로 나타났다.

자동차 선적작업장의 공기오염 실태조사 (Investigation into Air Pollution in Car Shipping Workshop in Pyeongtaek Port)

  • 김지호;원종욱;김치년;노재훈
    • 한국산업보건학회지
    • /
    • 제16권1호
    • /
    • pp.44-53
    • /
    • 2006
  • This study purposed to investigate air pollution in car shipping yards and, for this purpose, we selected an outdoor open-air yard and an indoor ramp into the ship and measured the concentrations of sulfur dioxide, nitrogen dioxide, carbon monoxide, PM10, PM2.5 and heavy metals in the air. The results of this study are as follows. No significant difference was observed in temperature and humidity between the outdoor and indoor workshop, and the average air flow was 0.52 m/s in the indoor workshop, which is higher than 0.19 m/s in the outdoor workshop(p<0.01). The average concentrations of sulfur dioxide, nitrogen dioxide, carbon monoxide, PM10 and PM2.5 according to workplace were 0.03 ppm(${\pm}0.01$), 0.03 ppm(${\pm}0.01$), 0.46 ppm(${\pm}0.22$), $39.44{\mu}g/m^3$(${\pm}2.45$) and $5.45{\mu}g/m^3$(${\pm}1.15$) respectively in the outdoor workshop, and 0.15 ppm(${\pm}0.05$), 0.22 ppm(${\pm}0.06$), 8.85 ppm(${\pm}3.35$), $236.39{\mu}g/m^3$(${\pm}58.21$) and $152.43{\mu}g/m^3$(${\pm}35.42$) respectively in the indoor workshop. Thus, the concentrations of gaseous substances in the indoor workshop were 4.9-19.2 times higher than those in the outdoor workshop, and the concentrations of fine dusts were 5.9-27.9 times higher(p<0.01). In addition, according to the result of investigating pollutant concentrations according to displacement and the number of car loaded when shipping gasoline cars into the ship, no significant relation between the number of cars loaded and pollutants was observed in shipping passenger cars, but the concentrations of nitrogen dioxide and carbon monoxide got somewhat higher with the increase of the number of cars loaded(p<0.05). In addition, the concentrations of nitrogen dioxide, carbon monoxide, PM10 and PM2.5 in the air were significantly higher when shipping recreational vehicles, the displacement of which is larger than passenger cars, than when shipping passenger cars(p<0.01). On the other hand, the average heavy metal concentrations of the air in indoor workshop were: lead $-0.05{\mu}g/m^3$(${\pm}0.10$); chromium $-0.90{\mu}g/m^3$(${\pm}0.18$); zinc $-0.38{\mu}g/m^3$(${\pm}0.24$); copper $-0.18{\mu}g/m^3$(${\pm}0.22$); and manganese and cadmium not detected. In addition, the complaining rates of 'asthma,' a major symptom of chronic respiratory diseases, were 18.5% and 22.5% respectively in indoor workers and outdoor workers. Thus the rate was somewhat higher in indoor workers but the difference was not statistically significant. The complaining rates of 'chronic cough' and 'chronic phlegm' were very low and little different between indoor and outdoor workers. The results of this study show that the reason for the higher air pollution in indoor than in outdoor workshop is incomplete combustion of fuel due to sudden start and over-speed when cars are driven inside the ship. In order to prevent high air pollution, efficient management measures should be taken including the observance of the optimal speed, the improvement of old ships and the installation of efficient ventilation system.