• Journal of Ecology and Environment
• /
• v.29 no.3
• /
• pp.305-321
• /
• 2006

Atmospheric Acid Deposition: Nitrogen Saturation of Forests: Volume weighted annual average wet deposition of nitroge at 33 sites in Korea during 1999-2004 ranged 7.28 to $21.05kgN{\cdot}ha^{-1}{\cdot}yr^{-1}$ with average $12.78kgN{\cdot}ha^{-1}{\cdot}yr^{-1}$, which values are similar level with nitrogen deposition of Europe and North America. The temperate forests that suffered long-term high atmospheric nitrogen deposition are gradually saturated with nitrogen. Such nitrogen saturated forest watersheds usually leach nitrate ion ($NO_3^-$) in stream water and soil solution. It may be likely that Korean forest ecosystems are saturated by much nitrogen deposition. In leaves with nitrogen saturation ratios of N/P, N/K and N/Mg are so enhanced that mineral nutrient system is disturbed, suffered easily frost damage and blight disease, reduced fine-root vitality and mycorrhizal activity. Consequently nitrogen saturated forests decrease primary productivity and finally become forest decline. Futhermore understory species are replaced the nitrophobous species by the nitrophilous one. In soil with nitrogen saturation uptake of methane ($CH_4$) is reduced and emission of nitrogen monoxide (NO) and nitrous oxide ($N_{2}O$) are increased, which gases are greenhouse gas accelerating global warming.

• KSBB Journal
• /
• v.16 no.6
• /
• pp.603-608
• /
• 2001

In this study, we studied on the remeval of toluene vapors in a lab-scale biofilter. Biofiltration was performed in a column fed downflow with contaminated air at ambient conditions. The column was packed with mixture of Peat and Calstene(5:3 vol. Ratio), Synthesized media, Bark and Wood chip, which were inoculated with microbial population of selected stains(Pseudomonas. putida, KCCM 11343, ATCC 12633). The microorganisms were immobilized on the bed medium and then biofilm were formed. The biofilter was operated under the conditions of various inlet toluene concentrations for 180 days and treated up to the elimination capacity of maximum 40 g/㎥hr at the inlet load of 30 g/㎥ hr with percentage removals of 20∼90% and gas retention times between 1 and 2 min. The pressure drop was very negligible through the biofilter columps because its value of 0.054 cmH$_2$O/m was much less than others. The effect of operating conditions such as flow rate, inlet toluene concentration and moisture contents on the performance of the biofilter was sequentially investigated in this study.

• Nuclear Engineering and Technology
• /
• v.38 no.2
• /
• pp.163-174
• /
• 2006

The $Ph{\acute{e}}bus$ FP project is an international reactor safety project. Its main objective is to study the release, transport and retention of fission products in a severe accident of a light water reactor (LWR). The FPT4 test was performed with a fuel debris bed geometry, to look at late phase core degradation and the releases of low volatile fission products and actinides. Post Test Analyses results indicate that releases of noble gases (Xe, Kr) and high-volatile fission products (Cs, I) were nearly complete and comparable to those obtained during $Ph{\acute{e}}bus$ tests performed with a fuel bundle geometry (FPT1, FPT2). Volatile fission products such as Mo, Te, Rb, Sb were released significantly as in previous tests. Ba integral release was greater than that observed during FPT1. Release of Ru was comparable to that observed during FPT1 and FPT2. As in other $Ph{\acute{e}}bus$ tests, the Ru distribution suggests Ru volatilization followed by fast redeposition in the fuelled section. The similar release fraction for all lanthanides and fuel elements suggests the released fuel particles deposited onto the plenum surfaces. A blockage by molten material induced a steam by-pass which may explain some of the low releases. The revaporisation testing under different atmospheres (pure steam, $H_2/N_2$ and steam /$H_2$) and up to $1000^{\circ}C$ was performed on samples from the first upper plenum. These showed high releases of Cs for all the atmospheres tested. However, different kinetics of revaporisation were observed depending on the gas composition and temperature. Besides Cs, significant revaporisations of other elements were observed: e.g. Ag under reducing conditions, Cd and Sn in steam-containing atmospheres. Revaporisation of small amounts of fuel was also observed in pure steam atmosphere.

• Analytical Science and Technology
• /
• v.25 no.4
• /
• pp.207-213
• /
• 2012

Analysis of the aroma constituents present in the rose essential oil of Chinese Kushui type (Rosa sertata ${\times}$ Rosa rugosa) by GC-FID and GC-MS was performed independently as an expert for the inter-laboratory round-robin test to verify reproducibility according to the decision of the preliminary meeting of ISO/TC-54 (Shanghai, Sep. 14-15, 2010). Total 179 peaks (using SPB-1 apolar column), 165 peaks (using DB-624 intermediate polar column), and 162 peaks (using Supelcowax-10 polar column) were separated by GC-FID, respectively. Major constituents (over 5%) by GC-FID were ${\beta}$-citronellol (41.6~46.7%), geraniol (9.7~11.0%), and nerol (3.4~4.5%). ${\beta}$-Citronellol peak was overlapped with nerol peak on SPB-1 and DB-624 columns, whereas the two peaks were separated each other on Supelcowax-10 column. Our results were generally consistent with Chinese data (ISO/DIS 25175); however, a peak of phenethyl alcohol separated by using PEG (Supelco wax) column was found at the quite different retention time. Comparative analysis was conducted using Bulgarian rose (Rosa damascena Miller) oil and perfume. Bulgarian rose oil showed rich amounts of characteristic aroma constituents than the essential oil of Chinese Kushui type.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.9 no.1
• /
• pp.73-78
• /
• 2001

The biological carbon dioxide fixation using microalgae and photo-bioreactor has been known as an effective carbon dioxide reduction technology. As algae has many other environmental factor for its growth, the desirable cultivation factors were investigated using a green alga, Euglena gracilis Z. In this study, Euglena gracilis Z showed good $CO_2$ fixation ability in high $CO_2$ concentration of 10-20% and it contained the high protein and vitamin E enough to be used as fodder. For the mass cultivation, the continuous and semi-continuous cultivation methods were employed. The optimum hydraulic retention time (HRT) for the continuous cultivation was 4 days at carbon dioxide concentration of 10%. In this condition, the final cell number was $3.57{\times}10^6/m{\ell}$. The growth of Euglena gracilis Z increased according to the light intensity.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.1 no.1
• /
• pp.65-72
• /
• 2003

Adsorption and desorption characteristics of methyl iodide at high temperature conditions up to 25$0^{\circ}C$ by TEDA-impregnated activated carbon and silver-ion exchanged zeolite(AgX-10), which are used for radioiodine retention in nuclear facility, were experimentally evaluated. In the range of temperature from 3$0^{\circ}C$ to 25$0^{\circ}C$, the adsorption capacity of base activated carbon decreased sharply with increasing temperature but that of TEDA-impregnated activated carbon showed higher value even at high temperature ranges. Especially, the residual amount of methyl iodide after desorption on TEDA-AC represented 30% lower value than that on AgX-10. However, it can be used as an adsorbent for the removal of methyl iodide up to 15$0^{\circ}C$ if it is preventing explosion by Ignition. The breakthrough curves of methyl iodide in the fixed bed packed with AgX-10 uP to 40$0^{\circ}C$ were compared upon the effects of bed temperatures, bed depth and input concentration of methyl iodide. Removal mechanism of methyl iodide on AgX-10 was proposed, based on the analysis of by-product gas generated from adsorption reaction.

• Korean Journal of Medicinal Crop Science
• /
• v.9 no.2
• /
• pp.108-115
• /
• 2001

The essential oils from the aerial parts of Tagetes minuta L. from two different locations in Korea were obtained by hydrodistillation in 0.52%(Goheung, Chonnam) and 0.48% yields(Puan, Chonbuk) as a dry weight base, respectively. A total of 69 components, accounting in 94.7% and 92.1% of the oil, respectively were identified by gas chromatography-mass spectrometric analysis and comparison of retention indices with those of authentic compounds. The main components in both samples(Goheung, Chonnam and Puan, Chonbuk) were limonene(5.83% and 6.41%, respectively), $cis-{\beta}-ocimene$ (4.87% and 47.73%), dihydrotagetone(14.78% and 52.83%), trans-tagetone(0.64% and 2.99%), cis-tagetone(1.13% and 2.50%), trans-tagetenone(1.15% and 11.45%) and cis-tagetenone(0.69% and 1.41 %). Although these components were present in both samples, the results showed large differences in the percentage composition of these components.

• Korean Journal of Food Science and Technology
• /
• v.30 no.1
• /
• pp.6-12
• /
• 1998

Degummed and bleached soybean oil was deodorized at a temperature range of $220{\sim}280^{\circ}C$ under the vacuum (4-5 torr) for 1 or 2 hrs. Gas chromatography with SP-2560 100 m capillary column was used to separate and quantitate fatty acid methyl esters and their isomers. Fatty acids were identified by comparing retention time with standards and GC-MS spectrum. The isomers of linoleic acid and linolenic acid in deodorized soybean oils were identified to be $C_{18:2}\;{\Delta}9-cis,\;{\Delta}12-trans,\;C_{18:2}\;{\Delta}9-trans,\;{\Delta}12-cis,\;C_{18:2}\;{\Delta}9-cis,\;{\Delta}12-cis,\;C_{18:3}\;{\Delta}9-cis,\;{\Delta}12-cis,\;{\Delta}15-trans,\;C_{18:3}\;{\Delta}9-trans,\;{\Delta}12-cis,\;{\Delta}15-cis,\;C_{18:3}\;{\Delta}9-cis,\;{\Delta}12-trans,\;{\Delta}15-cis,\;and\;C_{18:3}\;{\Delta}9-cis,\;{\Delta}12-cis,\;{\Delta}15-cis$. The formation of trans-fatty acids by deodorization at $240{\sim}280^{\circ}C$ for 2 hrs was in the range of 1.78 to 5.74%. Conclusively, the deodorizing conditions of $240^{\circ}C$ for 2 hrs or $250^{\circ}C$ for 1 hr were suggested as the best conditions which could minimize the formation of trans isomers of fatty acids in soybean oils.

• Korean Journal of Food Science and Technology
• /
• v.32 no.3
• /
• pp.481-490
• /
• 2000

Modified atmosphere packaging was applied to oriental melon(Cucumis melo L. var. makuwa Mak.) to extend its freshness during distribution. Gas composition and ethylene content in the film bags changed rapidly at the early stage of storage. Within 10 days, weight loss of the unpackaged increased upto 7.68% while those of the packaged remained less than 1.0% except LDPE film modified by addition of 5%(w/w) zeolite with $20\;{\mu}m$ thickness(20CK, 2.38%). Firmness was effectively maintained in the LDPE film modified by addition of 5%(w/w) zeolite with $40\;{\mu}m$ thickness(40CK) and the LDPE film with $40\;{\mu}m$ thickness containing ethylene absorber sachet(40LP). Peel color of the fruit changed rapidly in control and a little in 40CK. Oriental melon packages using 40CK provided better visual and sensory quality retention compared with others. Results suggested that packaging treatment such as 40CK could be used for extending freshness of oriental melon during transport period at ambient temperature.

• Journal of the East Asian Society of Dietary Life
• /
• v.20 no.3
• /
• pp.382-388
• /
• 2010

This study was aimed to examine the quality characteristics of the bread with the muffin added with the by-product of fermented ethanol from wheat rye that has high $\beta$-glucan contents. In the muffin added with TEFB (Triticale Ethanol Fermentation By-product), the height of the muffin decreased as the additive contents increased. There was no significant difference among the volumes of the muffins added with TEFB 0%, 5%, 10% and 15%. In the muffin added with TEFB, the height of the muffin decreased as the additive contents increased. In the moisture measurement of TEFB muffin, the moisture contents increased as the TEFB additive contents increased. Using SEM, showed that as TEFB additive contents increased, gluten contents was relatively lowered, which led to the reduced gas retention power and generation of rough tissues. In chromaticity, as the TEFB additive contents increased, the brightness decreased and the redness and yellowness decreased as well. The result of texture measurement showed that as the TEFB additive contents increased, hardness increased. springiness decreased gradually as the TEFB additive contents increased. There was no significant difference in cohesiveness (p<0.005). Although there as signigicant difference between the control group and the additive group in gumminess (p<0.005), there was no significant difference for a certain amount of additive contents (p<0.05). While there was significant difference in chewiness between the control group and the additive group (p<0.05). there was no significant difference for a certain amount of additive contents (p<0.05). The result of taste test of TEFB added muffin showed that the preference for the muffins added with 5% or more TEFB decreased. This study found that more than 5% of TEFB additives to muffin decreases the preference level.