• Transactions of the Korean hydrogen and new energy society
• /
• v.30 no.6
• /
• pp.485-489
• /
• 2019

Hydrogen is known to be a clean fuel which does not generate a green house gas during the combustion. However, about 8 kg of carbon dioxide is generated during the course of producing 1 kg of hydrogen through reforming, water gas shift reaction and pressure swing adsorption in order to obtain a high purity hydrogen over 99.999% by volume. In this work, carbon dioxide generation is estimated according to four kinds of natural gas compositions supplied by Korea Gas Corporation and regarding natural gas as pure methane. For the simulation of the modeling, PRO/II with PROVISION V10.2 at AVEVA was utilized and Peng-Robinson equation of state with Twu's alpha function was selected.

• Journal of the Korean Institute of Gas
• /
• v.6 no.1 s.17
• /
• pp.59-65
• /
• 2002

This paper presents new IT model, PIIS that integrates the safety control, construction, and operation managements in a conventional gas industry The systemic approach based on the PIIS model may reduce or increase the parameters as maximizing the safety, risk and crisis management, and increasing the cost-effective productivity The rapid synchronization and integration of the process using the PIIS model may produce more profits and satisfactions between customer and gas supplier. Thus, the PIIS model should quickly be introduced to gas industry at the beginning stage of engineering design and construction processes for maximizing production, effectiveness, and safety of the system from the exploration of a natural gas to a final consumption.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1999.11a
• /
• pp.23-29
• /
• 1999

Experimental studies are conducted to investigate the flame stability and the thermal/fuel NOx formation characteristics of the low calorific value (LCV) coal derived gas fuel. Synthetic LCV fuel gas is produced by mixing carbon monoxide, hydrogen, nitrogen and ammonia on the basis that the thermal input of the syngas fuel into a burner is identical to that of natural gas. The syngas mixture is fed to and burnt with air on flat flame burner. With the variation of the equivalence ratio for specific syngas fuel, flame behaviors are observed to identify the flame instability due to blow-off or flashback and to define stable combustion range. Measurements of NOx content in combustion gas are made for comparing thermal and fuel NOx from the LCV syngas combustion with those of the natural gas one. In addition, the nitrogen dilution of the LCV syngas is preliminarily attempted as a NOx reduction technique, and its effects on thermal and fuel NOx production are discussed.

• Journal of Biosystems Engineering
• /
• v.37 no.4
• /
• pp.233-244
• /
• 2012

Purpose: The kinetic evaluation was performed for swine manure (SM) degradation and biogas generation. Methods: The SM was anaerobically digested using batch digesters at feed to inoculum ratio (F/I) of 1.0 under mesophilic conditions ($36.5^{\circ}C$). The specific gas yield was expressed in terms of gram total chemical oxygen demand (mL/g TCOD added) and gram volatile solids added (mL/g VS added) and their effectiveness was discussed. The biogas and methane production were predicted using first order kinetic model and the modified Gompertz model. The critical hydraulic retention time for biomass washout was determined using Chen and Hashimoto model. Results: The biogas and methane yield from SM was 346 and 274 mL/ TCOD added, respectively after 100 days of digestion. The average methane content in the biogas produced from SM was 79% and $H_2S$ concentration was in the range of 3000-4108 ppm. It took around 32-47 days for 80-90% of biogas recovery and the TCOD removal from SM was calculated to be 85%. When the specific biogas and methane yield from SM (with very high TVFA concentration) was expressed in terms of oven dried volatile solids (VS) basis, the gas yield was found to be over estimated. The difference in the measured and predicted gas yield was in the range of 1.2-1.5% when using first order kinetic model and 0.1% when using modified Gompertz model. The effective time for biogas production ($T_{Ef}$) from SM was calculated to be in the range of 30-45 days and the critical hydraulic retention time ($HRT_{Critical}$) for biomass wash out was found to be 9.5 days. Conclusions: The modified Gompertz model could be better in predicting biogas and methane production from SM. The HRT greater than 10 days is recommended for continuous digesters using SM as feedstock.

• Transactions of the Korean hydrogen and new energy society
• /
• v.21 no.4
• /
• pp.278-285
• /
• 2010

The Sulfur-Iodine (SI) thermochemical hydrogen production process of a closed cycle consists of three sections, which are so called the Bunsen reaction section, the $H_2SO_4$ decomposition section and the HI decomposition section. To identify the role of oxygen that can be supplied to the Bunsen reaction section via the $H_2SO_4$ decomposition section, Bunsen reactions with a $SO_2,\;SO_2-O_2$ mixture and $SO_2-N_2$ mixture as feed gases were carried out using a stirred reactor in the presence of $I_2/H_2O$ mixture. As the results, the amounts of $I_2$ unreacted under the feed of mixture gases were higher than those under the feed of $SO_2$ gas only, and the amount of HI produced was relatively decreased. The results of Bunsen reaction using $SO_2-O_2$ mixture were similar to those using $SO_2-N_2$ mixture. It may be concluded that an oxygen in $SO_2-O_2$ mixture has a role as a carrier gas like a nitrogen in $SO_2-N_2$ mixture. The effects of oxygen were decreased with increasing temperature and decreasing oxygen content in $SO_2-O_2$ mixture.

• Journal of the Korean Applied Science and Technology
• /
• v.21 no.1
• /
• pp.89-96
• /
• 2004

The effect of La promoter on the carbon deposition and catalytic activity in the synthesis gas production with supported Ni catalysts was investigated. Active component was Ni and support was $CeO_2$ and the promoter used was La. The reaction was carried out in a fixed bed reactor at 1 atm and $650{\sim}800^{\circ}C$. The catalysts were prepared by two methods, the impregnation method and urea method. The catalysts prepared by the urea method showed 10 times higher surface area than those of prepared by the impregnation method. By the introduction of La promoter in the catalyst system, carbon deposition was remarkably reduced from 16% to 2%. It appears that the promoter facilitates the formation of a stable fluoride-type phase, which reduces the carbon deposition. The best catalytic activity and CO and $H_2$ selectivities were obtained with 2.5wt% $Ni/Ce(La)O_x$ catalyst at $750^{\circ}C$, giving 90% methane conversion, 93 and.80% of CO and $H_2$ selectivities, respectively.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.12
• /
• pp.13-19
• /
• 2004

We have been studied on the high concentration ozonized water production technology which substitute for the SPM wet cleaning solution process as the PR strip process after the photolithography process in the semiconductor and flat panel display manufacturing. In this work, we have developed the surface discharge type ozone generator which has the characteristics of the 12 ［wt%］ ozone concentration at the oxygen gas flow of 0.5［ℓ/min］ oxygen per cell and also developed the high efficiency ozone contactor for the mixing ozone gas with deionized water. As the production test results of the ozonized water, we obtained the ozonized water concentration above 80［ppm］ at the 10［wt%］ ozone gas concentration, and also had a good result of the PR strip rate of 147［nm/min］. at the 70［ppm］ ozonized water.

• Clean Technology
• /
• v.9 no.1
• /
• pp.23-28
• /
• 2003

The generation of food waste in Korea amounts to 4.10 million per year, which corresponds to 820,000 dry ton of organic waste. This has been used traditionally as animal feed or soil conditioner, but its efficacy has remained doubtful in recent years. In this study as an alternative we considered methane production by anaerobic treatment, which has an advantage of 200 million US dollars over aerobic methods. The production of methane amounts to $4.40{\times}10^8m^3$, 3.43% of $1.28{\times}10^8m^3$, total natural gas used in Korea. Furthermore the methane from household kitchen food waste amounts to 28.9% of the total gas used in the kitchen.

• Asian-Australasian Journal of Animal Sciences
• /
• v.31 no.10
• /
• pp.1598-1603
• /
• 2018

Objective: The goal of this study was to evaluate kenaf as a roughage source in vitro and its effects on meat quality of Hanwoo (Korean native) cattle. Methods: Three roughage materials, rice straw silage, ryegrass silage, and kenaf silage, were tested in a batch culture and feeding trial. Rumen fermentation parameters, including gas, pH, volatile fatty acid (VFA), and ammonia were analyzed. In the feeding trial, Hanwoo steers ($373.5{\pm}5.1kg$, n = 36, 11 month of age) were divided into three feeding groups (n = 12 each). Animals were fed with each silage and concentrate until the fattening stage. Results: Crude protein, ether extract, and non-structural carbohydrates were greater in kenaf silage. Total gas production was higher in ryegrass silage, followed by kenaf silage and rice straw silage (p<0.05). Total VFA and individual VFA (acetate, propionate, and n-butyrate) were greater in kenaf silage than rice straw silage (p<0.05). In vitro dry matter digestibility showed a similar trend to that of total gas and VFA production; it was higher in ryegrass silage and lower in rice straw (p<0.05). Throughout the feeding trial, the rice straw silage group showed significantly greater average daily gain than did the others (p<0.05). The feed conversion ratio in the group fed kenaf silage was significantly greater than that of others (p<0.05). No significant differences were observed in yield or quality traits, including carcass weight, ribeye area, backfat thickness, and scores for marbling, meat color, and fat color (p>0.05). Conclusion: The results indicated that no negative effects on growth performance and carcass characteristics occurred across treatments. Therefore, kenaf could be substituted for rice straw, which is most widely used as a roughage source in Korea.

• Asian-Australasian Journal of Animal Sciences
• /
• v.31 no.1
• /
• pp.54-62
• /
• 2018

Objective: Due to the threat of global warming, the livestock industry is increasingly interested in exploring how feed additives may reduce anthropogenic greenhouse gas emissions, especially from ruminants. This study investigated the effect of Rhodophyta supplemented bovine diets on in vitro rumen fermentation and rumen microbial diversity. Methods: Cannulated Holstein cows were used as rumen fluid donors. Rumen fluid:buffer (1:2; 15 mL) solution was incubated for up to 72 h in six treatments: a control (timothy hay only), along with substrates containing 5% extracts from five Rhodophyta species (Grateloupia lanceolata [Okamura] Kawaguchi, Hypnea japonica Tanaka, Pterocladia capillacea [Gmelin] Bornet, Chondria crassicaulis Harvey, or Gelidium amansii [Lam.] Lamouroux). Results: Compared with control, Rhodophyta extracts increased cumulative gas production after 24 and 72 h (p = 0.0297 and p = 0.0047). The extracts reduced methane emission at 12 and 24 h (p<0.05). In particular, real-time polymerase chain reaction analysis indicated that at 24 h, ciliate-associated methanogens, Ruminococcus albus and Ruminococcus flavefaciens decreased at 24 h (p = 0.0002, p<0.0001, and p<0.0001), while Fibrobacter succinogenes (F. succinogenes) increased (p = 0.0004). Additionally, Rhodophyta extracts improved acetate concentration at 12 and 24 h (p = 0.0766 and p = 0.0132), as well as acetate/propionate (A/P) ratio at 6 and 12 h (p = 0.0106 and p = 0.0278). Conclusion: Rhodophyta extracts are a viable additive that can improve ruminant growth performance (higher total gas production, lower A/P ratio) and methane abatement (less ciliateassociated methanogens, Ruminococcus albus and Ruminococcus flavefaciens and more F. succinogenes.