• 제목/요약/키워드: gas production

검색결과 2,692건 처리시간 0.036초

석탄을 원료로 한 수소 제조 공정 (Hydrogen Production Technologies from Coal)

  • 김종원;심규성
    • 한국수소및신에너지학회논문집
    • /
    • 제7권2호
    • /
    • pp.193-206
    • /
    • 1996
  • The simplest and lightest element-hydrogen is an alternative fuel which provides a clean and renewable energy source. Hydrogen can be used to power gas-type appliance and modified automobiles with water vapor as the only byproduct of combustion. Historically, production of hydrogen from coal was one of the mass production technology of hydrogen. In this paper, the status of hydrogen production process from coal was investigated to review the current situation of hydrogen production and utilization.

  • PDF

다수의 Feedstock을 이용하는 메탄가스 생산시스템의 일정계획에 관한 발견적 기법 (A Heuristic for Sequencing and Scheduling of Multiple Feedstock Biogas Production Systems)

  • 김봉진
    • 대한산업공학회지
    • /
    • 제22권1호
    • /
    • pp.155-164
    • /
    • 1996
  • Biomass to methane via anaerobic digestion conversion is a good supply method of substitutable energy resources. The economic viability of this technology is contingent upon managing the production facilities in a cost effective manner. The problem is to determine the batch production sequence as well as the batch residence times in the digester so as to maximize total gas production over a given planning horizon. The problem is difficult to solve since the batch sequencing decisions and the batch residence time decisions cannot be isolated. This paper developes a heuristic algorithm which is based on a dynamic programming procedure for the multiple feedstock sequencing and scheduling biogas production systems and demonstrates to yield good results.

  • PDF

Dried Bacillus subtilis Culture Reduced Ammonia Gas Release in Poultry House

  • Santoso, U.;Ohtani, S.;Tanaka, K.;Sakaida, M.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제12권5호
    • /
    • pp.806-809
    • /
    • 1999
  • The present study showed the advantages of dried Bacillus subtilis culture (DBSC) supplementation on reducing ammonia gas release in the poultry house. In Experiment 1, 65-week-old Hyline W-36 hens were raised in individual wire-floor cages in a windowless house, and divided into two groups of 180 hens each. One group was fed diets without DBSC as the control and another group was fed a diet supplemented with 2% DBSC. In Experiment 2, 2-week-old broiler chicks were divided into 3 treatment groups of 20 chicks each and maintained in individual floor cages. One group was fed the diet without DBSC and other two groups were fed the diet supplemented with 1 or 2% DBSC, respectively. In experiment 1, DBSC consistently reduced ammonia gas release in the laying house (p<0.01) and manure storage facilities (p<0.01). incubation of feces for 1, 2, 3, 4, 5, 6, 24 or 48 hours showed that DBSC consistently reduced ammonia gas release. In Experiment 2, DBSC reduced ammonia gas release in the broiler house; however, DBSC had no effect on total N, urate-N and ammonia-N contents of feces, but it improved cumulative N utilization and decreased serum urea-N concentration when chicks when chicks were fed 1% DBSC.

Ga이 첨가된 ZnO 박막의 가스센서로의 응용 연구 (Ga doped ZnO Thin Films for Gas Sensor Application)

  • 황현석;여동훈;김종희;송준태
    • 한국전기전자재료학회논문지
    • /
    • 제21권6호
    • /
    • pp.499-502
    • /
    • 2008
  • In this work, Ga-doped ZnO (GZO) thin films for gas sensor application were deposited on low temperature co-fired ceramics (LTCC) substrates, by RF magnetron sputtering method. The LTCC substrate is one of promising materials for this application since it has many advantages (e.g., low cost production, high manufacturing yields and easy realizing 3D structure etc.). The LTCC substrates with thickness of $400\;{\mu}m$ were fabricated by laminating 12 green tapes which consist of alumina and glass particle in an organic binder. The structural properties of the fabricated GZO thin film with thickness of 50 nm is analyzed by X-ray diffraction method (XRD) and field emission scanning electron microscope (FESEM). The film shows good adhesion to the substrate. The GZO gas sensors are tested by gas measurement system and show fast response and recovery characteristics to $NO_x$ gas that is 27.2 and 27.9 sec, recpectively.

Environmental analysis of present and future fuels in 2D simple model marine gas tubines

  • El Gohary, M. Morsy
    • International Journal of Naval Architecture and Ocean Engineering
    • /
    • 제5권4호
    • /
    • pp.559-568
    • /
    • 2013
  • Increased worldwide concerns about fossil fuel costs and effects on the environment lead many governments and scientific societies to consider the hydrogen as the fuel of the future. Many researches have been made to assess the suitability of using the hydrogen gas as fuel for internal combustion engines and gas turbines; this suitability was assessed from several viewpoints including the combustion characteristics, the fuel production and storage and also the thermodynamic cycle changes with the application of hydrogen instead of ordinary fossil fuels. This paper introduces the basic environmental differences happening when changing the fuel of a marine gas turbine from marine diesel fuel to gaseous hydrogen for the same power output. Environmentally, the hydrogen is the best when the $CO_2$ emissions are considered, zero carbon dioxide emissions can be theoretically attained. But when the $NO_x$ emissions are considered, the hydrogen is not the best based on the unit heat input. The hydrogen produces 270% more $NO_x$ than the diesel case without any control measures. This is primarily due to the increased air flow rate bringing more nitrogen into the combustion chamber and the increased combustion temperature (10% more than the diesel case). Efficient and of course expensive $NO_x$ control measures are a must to control these emissions levels.

화학 및 가스 공정산업에서 주요 공정제어 기술 (Major Control Techniques for Chemical and Gas Process Industries)

  • 유성진;이창준;이종민
    • 한국가스학회지
    • /
    • 제15권1호
    • /
    • pp.1-8
    • /
    • 2011
  • 최근 석유 위주의 에너지원에서 가스나 신재생에너지와 같은 새로운 에너지원을 생산 혹은 이용하는 공정들에 대한 연구가 활발한 가운데 이러한 공정들의 상업화를 위해서는 조업 중 에너지 절감과 생산 단가의 경제성 확보가 필수적이며, 이를 위해서는 적합한 공정제어 기법의 도입이 필수적이라 할 수 있다. 본 논문에서는 지난 50여 년간 공정산업에 적용된 다양한 공정제어 기법 중 큰 기틀이 되는 몇몇 기술을 소개하고, 가스 관련 공정의 응용 예 및 앞으로 나아갈 방향에 대해 논하였다.

Effects of nitrogen gas flushing in comparison with argon on rumen fermentation characteristics in in vitro studies

  • Park, KiYeon;Lee, HongGu
    • Journal of Animal Science and Technology
    • /
    • 제62권1호
    • /
    • pp.52-57
    • /
    • 2020
  • In rumen in vitro experiments, although nitrogen gas (N2) flushing has been widely used, its effects on rumen fermentation characteristics are not clearly determined. The present study is the first to evaluate the effects of N2 flushing on rumen fermentation characteristics in in vitro batch culture system by comparing with new applicable non-metabolizable gas: argon (Ar). The rumen fluid was taken from two Korean native heifers followed by incubation for 3, 9, 12, and 24 h with N2 or Ar flushing. As a result, in all incubation time, N2 flushing resulted in higher total gas production than Ar flushing (p < 0.01). Additionally, in N2 flushing group, ammonia nitrogen was increased (p < 0.01). However, volatile fatty acids profiles and pH were not affected by the flushing gases (p > 0.05). In conclusion, the present study demonstrated that N2 flushing can influence the rumen nitrogen metabolism via increased ammonia nitrogen concentration and Ar flushing can be used as a new alternative flushing gas.

The effect of thickness and operation temperature on Ga doped ZnO thin film NOx gas sensor

  • 황현석;여동훈;김종희;송준태;김정호
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
    • /
    • pp.365-365
    • /
    • 2008
  • In this work, Ga-doped ZnO (GZO) thin films for NOx gas sensor application were deposited on low temperature co-fired ceramics (LTCC) substrates, by RF magnetron sputtering method. The LTCC substrate is one of promising materials for this application since it has many advantages (e.g., low cost production, high manufacturing yields and easy realizing 3D structure etc.). The LTCC substrates with thickness of 400 pm were fabricated by laminating 12 green tapes which consist of alumina and glass particle in an organic binder. The structural properties of the fabricated GZO thin films with different thickness are analyzed by X-ray diffraction method (XRD) and field emission scanning electron microscope (FESEM). The GZO gas sensors are tested by gas measurement system under varing operation temperature and show good performance to the NOx gas in sensitivity and response time.

  • PDF

공기 및 연료에 대한 배기가스 희석 방법에 의한 저 $NO_x$ 연소특성에 관한 실험 (Experiment on Low $NO_x$ Combustion Characteristics by Flue Gas Dilution In Air and Fuel Sides)

  • 조은성;정석호
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2004년도 춘계학술대회
    • /
    • pp.1499-1504
    • /
    • 2004
  • Flue gas recirculation (FGR) is a method used to control oxides of nitrogen ($NO_x$) in combustion system. The recirculated flue gases resulted in slow reaction and low flame temperatures, which in turn resulted in decreased thermal NO production. Recently, it has been demonstrated that introducing the recirculated flue gas in the fuel stream, that is, the fuel induced recirculation (FIR), resulted in a much greater reduction in $NO_x$ per unit mass of recirculated gas, as compared to introducing the flue gases in air. In the present study, the effect on $NO_x$ reduction in turbulent swirl flame in laboratory scale using FGR/FIR methods through the dilution using $N_2$ and $CO_2$. Results. show the $CO_2$ dilution is more effective $NO_x$ reduction methods because of large temperature drop due to the larger specific heat $CO_2$ compared to $N_2$. FIR is more effective to reduce $NO_x$ emission than FGR when the same recirculation ratio of dilution gas.

  • PDF

산화-환원 싸이클 조업에 의한 고순도 수소생성 (High Purity Hydrogen Production by Redox Cycle Operation)

  • 전법주;박지훈
    • 한국수소및신에너지학회논문집
    • /
    • 제21권5호
    • /
    • pp.355-363
    • /
    • 2010
  • High purity hydrogen, 97-99 vol.%, with CO at just ppm levels was obtained in a fixed bed of iron oxide employing the steam-iron cycle operation with reduction at 823K and oxidation in a steam-$N_2$ mixture at 773K TGA experiments indicated that temperature of the reduction step as well as its duration are important for preventing carbon build-up in iron and the intrusion of $CO_2$ into the hydrogen product. At a reduction temperature of 823K, oxide reduction by $H_2$ was considerably faster than reduction by CO. If the length of the reduction step exceeds optimal value, low levels of methane gas appeared in the off-gas. Furthermore, with longer durations of the reduction step and CO levels in the reducing gas greater than 10 vol.%, carbidization of the iron and/or carbon deposition in the bed exhibited the increasing pressure drop over the bed, eventually rendering the reactor inoperable. Reduction using a reducing gas containing 10 vol.% CO and a optimal reduction duration gave constant $H_2$ flow rates and off-gas composition over 10 redox reaction cycles.