• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.21 no.1
• /
• pp.132-139
• /
• 1997

Spray characteristics of external mixing sonic twin-fluid atomization nozzles are investigated experimentally. Particle sizes are measured by the Fraunhofer diffraction method using the Malvern particle analyzer, and their radial distributions are obtained using the tomographical transformation technique. The spatial distribution of SMD shows that the drop size increases in the radial direction at a fixed liquid flow rate, and the distribution is getting uniform rapidly as the atomizing gas pressure increases. The SMD decreases as the liquid flow rate increases at a fixed GLR. It is found that the atomization efficiency of the flush type sonic nozzle is superior to that of protrusion type. The effect of laser beam diameter of the particle analyzer on the spatial SMD distribution is minor at present experimental conditions.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.1 no.2
• /
• pp.73-81
• /
• 1977

It is well known fact that there is a theoretical analogous relation ship in terms of differential equation between the stress distribution of a bar under pure torsional moment and the deflection of a membrane subjected to a uniform pressure. This relationship has been applied to the experimental determination of torsional stresses with troublesome and elaborative measuring procedure since Griffith's invention of the soap-film apparatus. In this paper, the soap-film was replaced by a highly polished steel plate and whole visualable deflectional contour-line-map was able to obtain by using Michelson Interferometer with Ne-He Gas Laser lignt source enabling to determine the stress distribution in the vicnity of the symmetrical inner-boundary in a section. Experimental results were satisfactory and the margin of error in the measurement was lower than 1%.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.18 no.4
• /
• pp.381-385
• /
• 2005

The plasma temperature of Ar gas in hollow cathode discharge were measured. This is done by measuring the line profile of the 1s/sub 8/-2p/sub 8/ transition in Ar, using a single-frequency diode laser. Low power diode lasers have been successfully used for investigation of the line profiles of Ar transitions in hollow cathode discharges. It turns out that the plasma temperature of Ar is 640∼783 K in the discharge current range at 7∼10 mA.

• Proceedings of the KWS Conference
• /
• 2002.10a
• /
• pp.342-348
• /
• 2002

The welding technology for production of power plant facility as for other industries has been progressing forward automation and mechanization for cost reduction and shortening of cycle time. The welding for boiler tube is automated or mechanized as the parts and subassemblies of tubes are conveyed automatically in the shop. The temperature of boiler stearn is being progressively increased for higher plant efficiency. The welding of nuclear component is characterized by heavy thickness and narrow gap Submerged Arc Welding. Narrow gap Gas Metal Arc Welding and Electron Beam Welding is applied to turbine diaphragm. To improve the resistance of solid particle erosion of turbine blade and nozzle partition, HVOF spray technology and boriding process has been applied.

• The KSFM Journal of Fluid Machinery
• /
• v.6 no.2 s.19
• /
• pp.47-53
• /
• 2003

The piston prover was developed and the flow measurement uncertainty of this piston prover was evaluated according to ISO/IEC 17025. The laser interferometer, instead of the optical sensors used in the typical provers, was employed in this prover to measure accurately the testing time and the moved distance of the piston. Uncertainty was calculated with evaluation of various uncertainty factors affecting flow measurement. The expanded uncertainty (U) of the piston prover was $1.3{\times}10^{-3}$ (at the confidence level of $95\%$). This evaluation example will be useful in the flow measurement uncertainty determination of other gas flow measurement system.

• Proceedings of the KSME Conference
• /
• 2000.11b
• /
• pp.278-284
• /
• 2000

The method of Impinging jet was applied lots of part in industrial field as a cooling of as gas turbine blade, a annealing of metal and plastic sheets, drying of textile, veneer paper, X-ray medical devices, laser weapons and electronic components. This study's main factor is reciprocating Jet impingement perpendicular to the heated Surface. We researched the effect of heat transfer and enhancement with pulsating air jet. The pulsating air jet has an improvement in pulsating Frequencies((f= 0.5, 1, 1.5, 3Hz) and nozzle-to-plate distances($l/d=\;2{\sim}4,\;6{\sim}8,\;4{\sim}6,\;8{\sim}10$).

• Proceedings of the Korean Nuclear Society Conference
• /
• 1998.05b
• /
• pp.210-215
• /
• 1998

본 연구는 핫셀(Hot-cell)에서의 활용을 전제로 핵연료 봉단용접기술로 개발되고 있는 래이저(Laser) 용접기술을 핵연료봉 퍼복재인 Zircaloy-4에 적용하여 그 용접성에 대한 기초적 특성을 분석하고, 관련 용접변수들의 용접성에 미치는 영향을 알아보고자 하였다. 사용된 용접기는 평균출력 150W급인 펄스형 Nd:YAG 레이저 용접기였으며, 보호가스 (shielding gas) 종류와 유량(flow rate), 용접속도(travel speed), 초점위치(focus position), 빔 파워(beam power), 시편의 표면거칠기(specimen surface roughness) 등의 용접변수가 용입 깊이와 용접비드 폭, 기계적 특성, 그리고 용접결함에 미치는 영향을 조사하였다. 그 결과 용접변수로 범 파워 125W이상, 초점위치 2mm, 그리고 보호가스로는 He가스가 적절하였으며, 시편의 표면거칠기가 거칠수록 용입깊이가 깊었다. 본 연구를 통해 핵연료봉 피복재 Zircaloy-4의 레이저 용접시 신뢰성 있는 용접조건을 확립하기 위한 기초자료를 얻을 수 있었다.

• Korean Journal of Optics and Photonics
• /
• v.6 no.2
• /
• pp.122-129
• /
• 1995

질소 기체의 온도변화에 따른 질소 레이저의 동작 특성을 조사하고 실험에 의해 얻은 E/P값을 이론치와 비교 연구하였다. 이를 위하여 레이저 관의 길이가 200mm이고, 다중 평행판 축전기형 전송 회로 및 질소 기체의 온도 조정 장치로 구성된 질소 레이저를 제작하였다. 반복률 20Hz에서 스파크 갭의 전극 거리 4mm일 때 최대출력을 얻었으며 최적동작 조건은 질소 기체 온도 $30^{\circ}C$, 기체 압력 70torr이었다. 이때의 E/P는 411V/cm.torr이었다. 한편 질소 기체의 온도가 증가함에 따라 최적 동작 조건은 높은 압력 쪽으로 이동하는 경향을 보였고 이때 E/P값은 감소하는 것으로 나타나 이론과 어느 정도 일치함을 알 수 있었다.

• 한국가시화정보학회:학술대회논문집
• /
• 2001.12a
• /
• pp.36-43
• /
• 2001

The flow field structures of two interacting parallel supersonic free jets are studied by flow visualization using planar laser-induced fluorescence of NO seeded in nitrogen gas. The experiments are carried out for several distances between two orifice centers and for various ratios of the pressure in the reservoir to that in the expansion chamber. The flow fields are visualized mainly on the plane including two jet centerlines and its characteristic shock system, especially a cell structure formed secondly by interaction of two jets, are analyzed. The positions of the normal shock depending on the pressure ratios are also compared.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 1999.11a
• /
• pp.11-16
• /
• 1999

Discharge characteristics research for high voltage and large current electric machinery design, the development of ozonizer with high yield and efficiency for environment improvement, generation of plasma & laser and EMI EMC are research fields of Enersy & Environment Electromagnetic Laboratory(EEEL) in the school of electrical & electronic engineering of Yeungnam University. On this paper, we would like to introduce the discharge and ozone generation characteristics of ozonizers designed and manufactured by EEEL. After starting research for fluid gas discharge characteristics early in the 1980's, high voltage nozzle(HVN) type ozonizer, neon lamp(Nelamp) type ozonizer, ozone lamp(Olamp) type ozonizer and multi-discharge type ozonizer(MDO) have been investigated since 1990.