• 대한기계학회논문집B
• /
• 제23권11호
• /
• pp.1379-1389
• /
• 1999

A new technique for control of size and shape of flame-made particles is Introduced. The characteristic sintering time can be controlled Independently of collision time by heating the particles with irradiation of laser because the sintering time strongly depends on temperature. A coflow oxy-hydrogen diffusion flame burner was used for $SiCl_4$ conversion to silica particle. Nanometer sized aggregates irradiated by a high power CW $CO_2$ laser beam were rapidly heated up to high temperatures and then were sintered to approach volume-equivalent spheres. The sphere collides much slower than the aggregate, which results in reduction of sizes of particles maintaining spherical shape. Light scattering of Ar ion laser and TEM observation using a local sampling device were used to confirm the above effects. When the $CO_2$ laser was irradiated at low position from the burner surface, particle generation due to gas absorption of laser beam occurred and thus scattering intensity increased with $CO_2$ laser power. At high irradiation position, scattering intensity decreased with $CO_2$ laser power and TEM image showed a clear mark of evaporation and recondensation of particles for high $CO_2$ laser power. When the laser was irradiated between the above two positions where small aggregates exist, average size of spherical particles obviously decreased to 58% of those without $CO_2$ laser irradiation with the spherical shape. Even for increased carrier gas flow rate by a factor of three, TEM photograph also revealed considerable reduction of particle size.

• 한국연소학회지
• /
• 제15권4호
• /
• pp.43-52
• /
• 2010

A non-intrusive measurement, Planar Laser Induced Fluorescence was employed to visualize and measure the fuel distribution of the non-reacting field at the burner exit of gas turbine combustor. Measurement techniques, image processing method and quantification procedure were presented. Also, concentration measurement with gas analyzer was carried out to verify the propriety of PLIF result. The PLIF result coincides well with gas analyzer measurement result. PLIF test result for several other conditions are mentioned as well.

• 조명전기설비학회논문지
• /
• 제20권1호
• /
• pp.19-26
• /
• 2006

용량결합고주파(ccrf)방전은 홀로우음극방전이나, 직류방전에 비해서 방전관의 구조가 간단하고 균질한 플라즈마를 발생시키는 장점을 가지고 있다. 본 논문에서는 ccrf-방전을 기체레이저의 여기에 적용하기 위한 목표를 가지고 방전시스템을 선계, 제작하여 연속운전의 균질한 방전을 실현하였다. 13.56[MHz]의 rf-전력을 방전 내부로 효율적으로 결합하기 위해서 내부직경 5[mm]의 레이저방전관에 특수하게 제작된 rf-전극을 사용하였다. 또한 방전관의 임피던스가 rf-발생기의 풀력저항 50[$\Omega$]에 정합을 이루는 임피던스 정합회로를 개발하였다.

• Bulletin of the Korean Chemical Society
• /
• 제34권3호
• /
• pp.907-911
• /
• 2013

Numbers of matrix- and analyte-derived ions and their sum in matrix-assisted laser desorption ionization (MALDI) of a peptide were measured using 2,5-dihydroxybenzoic acid (DHB) as matrix. As for MALDI with ${\alpha}$-cyano-4-hydroxy cinnamic acid as matrix, the sum was independent of the peptide concentration in the solid sample, or was the same as that of pure DHB. This suggested that the matrix ion was the primary ion and that the peptide ion was generated by matrix-to-peptide proton transfer. Experimental ionization efficiencies of $10^{-5}-10^{-4}$ for peptides and $10^{-8}-10^{-7}$ for matrices are far smaller than $10^{-3}-10^{-1}$ for peptides and $10^{-5}-10^{-3}$ for matrices speculated by Hillenkamp and Karas. Number of gas-phase ions generated by MALDI was unaffected by laser wavelength or pulse energy. This suggests that the main role of photo-absorption in MALDI is not in generating ions via a multi-photon process but in ablating materials in a solid sample to the gas phase.

• 한국광학회지
• /
• 제3권4호
• /
• pp.234-238
• /
• 1992

금속과 판유리를 이용한 도파관 탄산가스 레이저를 제작하고 출력특성을 조사하였다. 도파관의 길이는 50cm, 내부 단면적은 $6\times 6\ttextrm{mm}^{2}$이며 13.56MHz의 고주파로 횡여기시키는 방식이다. 가스 밀폐형으로 동작될 때 입력전력과 가스압력 변화에 의한 레이저 출력의 측정 결과 가스 분압비 $He:CO_{2}:N_{2}:Xe= 6:1:2:1$, 전체 가스압력 50Torr, 고주파 입럭전력이 180W인 조건에서 최대출력 9.5W로 발진하고 있다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2000년도 제18회 학술발표회 논문개요집
• /
• pp.213-213
• /
• 2000

Direct laser vaporization of transition-metal(Co, Ni)/graphite composite pellet produced single wall carbon naotubes(SWNT) in the condensing vapor in a heated flow cylinder-type tube furnace, Transition metal/graphite composite pellet target was made by mixing graphite, Co, and Ni in 98:1:1 atomic weight ratios, pressing the mixed powder, and curing it. The target was placed in a tube furnace maintained at 1200$^{\circ}C$ and Ar inert collision gas continuously flowed into the tube. The 2nd harmonic, 532nm wavelength light from Nd-YAG laser was used to vaporize the tube. The carbon nanotubes produced by the laser vaporization were accumulated on quartz tube wall. The raw carbon nanotube materials were purified with surfactants(Triton X-100) in a ultrasonicator. These carbon nanotubes were analyzed using SEM, XRD, and Raman spectroscopic method. The carbon nanotube growth on the Ni-patterned Si substrate was investigated by the CVD process. Transition-metal, Ni and CH4 gas were used as a catalyst and a reactant gas, respectively. The structure and the phonon frequencies of the carbon nanotubes formed on the patterned Si substrate were measured by SEM and Raman spectrometer.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 추계학술대회 논문집 학회본부 C
• /
• pp.1001-1003
• /
• 1998

In this paper, $Ar^+$ ion laser etching process of single/poly crystalline silicon with $CCl_{2}F_{2}$ gas is studied for MEMS applications. To investigate the effects of process parameters, laser power, gas pressure, scanning speed were varied and multiple scanning was carried out to obtain high aspect ratio. In addition, scanning width was varied to observe the trench profile etched in repeating scanning cycle. From the etching of $2.6{\mu}m$ thick polycrystalline Si deposited on insulator, trench with flat bottom and vertical side wall was obtained and it is possible to apply this results for MEMS applications.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집
• /
• pp.121-125
• /
• 2001

We study the feasibility of synthesizing Si particles using PLA method. In the previous studies, it was possible to control the size of Si nanoparticles bythe He gas pressure. In this study, we fabricated sub-micron size Si particles with various shapes such as conical, hexagonal, and ring by controlling not only the ambient as pressure but also the laser energy density. Furthermore, we found that the conical Si particles were uniform-sized and had step shape when observed from FE-SEM and AFM. The conical Si particle has the same crystal structure as the bulk single crystalline Si by the analysis of the Raman scattering. It is shown that the relationship between the laser energy density and the He gas pressure inside the chamber affects the shape of the Si particle.

• 조명전기설비학회논문지
• /
• 제25권7호
• /
• pp.9-14
• /
• 2011

A spectroscopic measuring system was developed in order to determine optical gain of gas laser discharge for any optical transitions between 190[nm] and 800[nm] without laser resonator. With an image optical system and a feedback optical system emission light of laser discharge are entered in a monochromator and received at a photomultiplier. Subsequently optical gain and line intensity are measured.

• 한국가스학회지
• /
• 제28권1호
• /
• pp.53-58
• /
• 2024

산업의 발전과 생활 수준의 향상으로 인하여 전 세계적으로 천연가스의 사용량은 지속해서 증가하고 있으며, 이에 따른 발전소, 저장시설, 공급배관망 확충 등 관련 산업시설도 지속해서 증가하고 있다. 천연가스는 편리하고 환경오염이 없는 청정연료이지만 누출로 인한 사고 발생 시, 인명피해는 물론 대규모 재산상 손해, 지구 온실효과에 부정적인 영향을 초래한다. 중대재해 처벌 등에 관한 법률 등도 무거운 상황에서 더더욱 안전을 기해야 할 상황이다. 이에 레이저 기반 흡수 분광분석법의 원리를 적용하여 최대 거리 30m에서 누출되는 메탄 농도를 검출할 수 있는 원거리 휴대용 메탄 누출 가스 검지 시스템을 개발하여 그 효과성을 검증하였다.