• Journal of Welding and Joining
• /
• 제5권1호
• /
• pp.23-33
• /
• 1987

플라즈마 절단은 산업계에서 널리 사용되고 있으나 공정의 해석에 대한 연구는 매우 부족하다. 본 연구에서는 알미늄판재에 나타나는 온도분포를 해석함으로써 절달폭을 이론적으로 예측하고 자 하였다. 열유동을 해석하는데 있어서, 플라즈마 아아크의 강도가 폭방향으로는 정상분포 (Gaussian distribution)을 갖고 두께방향으로는 지수함수적으로 감소한다고 가정하였다. 측정된 아아크효율을 이용한 계산결과 이론적으로 예측된 절단부의 크기 및 형상이 실험치와 매우 잘 일치하였으며, 따라서 제안된 해석방법은 플라즈마 절달공정의 해석에 유용하게 적용될 수 있 었다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제33권8호
• /
• pp.1242-1251
• /
• 2020

Objective: The 3×3 factorial arrangement was used to investigate if either high water-soluble carbohydrates (WSC) cultivars or suitable time of day that the grass cut could improve nutrient values and in vitro fermentation characteristics. Methods: The 3 cultivars were mowed at 3 diurnal time points and included a benchmark WSC ryegrass cultivar 'Premium', and 2 high WSC cultivars AberAvon and AberMagic, which contained, on average, 157, 173, and 193 g/kg dry matter (DM) of WSC, and 36.0, 36.5, and 34.1 g/kg DM of N during 7th regrowth stage, respectively. The fermentation jars were run at 39℃ with gas production recorded and sampled at 2, 5, 8, 11, 14, 17, 22, 28, 36, and 48 h. The rumen liquid was collected from 3 rumen fistulated cows grazing on ryegrass pasture. Results: High WSC cultivars had significantly greater WSC content, in vitro DM digestibility (IVDMD) and total gas production (TGP), and lower lag time than Premium cultivar. Methane production for AberMagic cultivar containing lower N concentration was marginally lower than that for AberAvon and Premium cultivars. Grass cut at Noon or PM contained greater WSC concentration, IVDMD and TGP, and lower N and neutral detergent fiber (NDF) contents, but CH₄ production was also increased, compared to grass cut in AM. Meanwhile, the effects of diurnal cutting time were influenced by cultivars, such as in vitro CH₄ production for AberMagic was not affected by cutting time. The IVDMD and gas production per unit of DM incubated were positively related to WSC concentration, WSC/N and WSC/NDF, respectively, and negatively related to N and NDF concentrations. Conclusion: These results imply either grass cut in Noon or PM or high WSC cultivars could improve nutrient values, IVDMD and in vitro TGP, and that AberMagic cultivar has a slightly lower CH₄ production compared to AberAvon and Premium. Further study is necessary to determine whether the increase of CH₄ production response incurred by shifting from AM cutting to Noon and/or PM cutting could be compensated for by high daily gain from increased WSC concentration and DM digestibility.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 금형가공,미세가공,플라스틱가공 공동 심포지엄
• /
• pp.175-180
• /
• 2005

In this study, we have developed a novel wire straightener which uses the direct heating method (DHM) fer straightening the micro wire. Also, we have developed a shearing device for cutting the micro wire. In order to avoid the surface oxidization, we supplied the inert gas(Ar) during the heating process and examined the effect of gas flow rate. The effects of the tension and the current applied to the tungsten micro wires were also thoroughly studied. From various experiments and analyses, we could obtain fine straightness $(\approx1\;{\mu}m/1000\;{\mu}m)$ and roundness $(<{\pm}2{\mu}m\;/100{\mu}m)$ when the tension is $500\~~600gf$ and the current is about 1.5A. for burrfree cutting, counter-punch method which two cutters moving contrary was used. The cutting blade has various U-groove angle where upper $10^{\circ}$, $mid:25^{\circ}$, lower $0^{\circ}$. After the shearing process, we confirmed the shearing section.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 1996년도 특별강연 및 춘계학술발표 개요집
• /
• pp.26-27
• /
• 1996

• 한국분말재료학회지
• /
• 제26권5호
• /
• pp.415-420
• /
• 2019

SiAlON ceramics are used as ceramic cutting tools for heat-resistant super alloys (HRSAs) due to their excellent fracture toughness and thermal properties. They are manufactured from nitride and oxide raw materials. Mixtures of nitrides and oxides are densified via liquid phase sintering by using gas pressure sintering. Rare earth oxides, when used as sintering additives, affect the color and mechanical properties of SiAlON. Moreover, these sintering additives influence the cutting performance. In this study, we have prepared $Yb_{m/3}Si_{12-(m+n)}Al_{m+n}O_nN_{16-n}$ (m = 0.5; n = 0.5, 1.0) ceramics and manufactured SiAlON ceramics, which resulted in different colors. In addition, the characteristics of the sintered SiAlON ceramics such as fracture toughness and microstructure have been investigated and results of the cutting test have been analyzed.

• 한국전산구조공학회논문집
• /
• 제16권3호
• /
• pp.261-269
• /
• 2003

최근 강교량이나 선박과 같은 강구조물에 있어서 여러 가지 환경요인에 의해 균열 및 부식 등의 문제가 다수 발생되어지고 있다. 이러한 문제를 해결하기 위해 보수용접을 사용할 수 있다. 이러한 보수용접은 절단이라는 과정을 필연적으로 수반하고 있다. 따라서 이러한 절단 줄 얻어지는 잔류응력의 예측은 구조물의 안전이라는 측면에서 중요하다고 할 수 있다. 본 연구에서는 2차원 및 3차원 유한요소 해석을 수행하여 가스절단에 의해 얻어진 절단잔류응력을 구하였으며, 2차원 및 3차원 해석기법의 정도를 명확히 하였다. 2차원 및 3차원 해석을 수행하여 얻은 절단잔류응력의 분포 및 그 절대치는 유사한 값을 나타내었다.

• 한국가스학회지
• /
• 제10권3호
• /
• pp.54-59
• /
• 2006

가정용 LPG 가스시설에 사용되고 있는 압력조정기에서 체결된 호스가 분리되거나 또는 고의로 절단하여 발생하는 가스사고 및 고의사고를 예방하기 위해서 조정기 출구에 차단기능을 갖는 안전장치를 개발하였다. 본 연구를 통하여 개발된 차단안전장치의 작동성과 현장 적용여부를 확인하기 위하여 조정기의 설치상태에 따른 시험과, 가정집에서의 현장시험을 실시하였다. 시험결과 입구압력 $0.07{\sim}1.56MPa$의 조건에서 조정기의 설치상태와는 무관하게 호스길이 5 m이내에서 차단되었고, 차단유량은 수직상향, 수평, 수직하향의 순서로 높게 나타났다. 또한 가정집에 설치하여 5개월 시험한 결과, 가스레인지나 보일러를 사용하는데 있어 문제점은 없는 것으로 나타났다. 개발된 조정기 차단안전장치가 상용화되어 보급된다면 호스분리나 절단에 따른 사고를 대폭적으로 예방하는데 크게 기여할 수 있을 것으로 기대된다.

• International Journal of Precision Engineering and Manufacturing
• /
• 제4권1호
• /
• pp.23-29
• /
• 2003

Stencil is used normally as a mask for solder pasting on pad of a printed circuit board (PCB). The objective of this study is to develop a stencil cutting system and determine the optimal conditions to make good-quality stencil by using a Nd:YAG laser. The effects of process parameters such as laser power, type of mask, gas pressure, cutting speed and pulse duration on the cut edge quality were investigated. In order to analyze the cut surface characteristics (roughness, kerfwidth, dross) optical microscopy, SEM microscopy and roughness measurements were used. As a result, the optimal conditions of cutting process parameters were determined, and the practical feasibility of the proposed system was also examined by using a commercial Gerber file for PCB stencil manufacturing.

• 한국조경학회지
• /
• 제20권3호
• /
• pp.57-63
• /
• 1992

The present investigation was undertaken to determine if CO2 enrichment promoted rooting and subsequent growth of Lagerstroemia indica L. cuttings. Cutting were taken from the one-year-old semihardwood twigs, and rooted in enclosed propagation frame with enriched CO2 levels (500-2000ppm) regulated by a gas monitor. The base of each cutting was dippid from 500 to 4000ppm naphthalenacetic acid. Roothing was determined after 3 months. CO2 enrichment during roothing increased the rooting percentage and number of roots per cutting, but nontreated cuttings rooted in low percentages producing one or two roots. The length of new shoots and dry weight of whole cuttings in CO2 enrichment were significantly greater than those of the atmospheric controls. The organic and inorganic compounds concentraion were measured as an indication of nutritional state in whole cuttings. As a result of CO2 enrichment, carbohydrate, protein and inorganic compounds(total nitrogen, P2O5, K2O, CaO, MgO) concentration were higher than controls.

• 한국정밀공학회지
• /
• 제13권11호
• /
• pp.73-81
• /
• 1996

This paper presents a general procedure for the selection of the machining parameters for a given machine which provides the maximum material removal rate using a Genetic Algorithms(GAs). Some constraints were given in order to achieve desired surface integrity and cutting tool life conditions as wel as to protect machine tool. Such a constrained problem can be transformaed to unconstrained problem by associating a penalty with all constraint violations and the penalties are included in the function evaluation. Genetic Algorithms can be used for finding global optimum cutting conditions with respect to the above cost function transformed by pennalty function method. From the demonstration of the numerical results, it was found that the near optimal conditions could be obtained regardless of complex solution space such as cutting environment.