• Geosciences Journal
• /
• 제22권6호
• /
• pp.939-953
• /
• 2018

We examined the microfabrics of omphacite and garnet in foliated eclogite to determine the influence of the layered structure on seismic observations in subduction zone. The analyzed eclogite, from the Lanterman Range, northern Victoria Land, Antarctica, is characterized by layering in which the modal abundances of garnet and omphacite vary. For garnet, the low aspect ratios, similar angular distribution of long axes relative to the foliation in both layers, uniform grain size distribution, near-random crystallographic preferred orientations (CPOs), and misorientation angle distributions are indicative of passive behavior during deformation. In contrast, omphacite shows relatively high aspect ratios, a low angle between the long axes of crystals and the foliation, a wide grain-size distribution, and distinctive CPOs, suggesting dislocation creep as the main deformation mechanism. The results of fabric analyses are consistent with strain localization into omphacite or omphacite-rich layers rather than garnet or garnet-rich layers. The single-crystal seismic anisotropy of garnet is very weak ($AV_P=0.2%$, $AV_S=0.5-0.6%$), whereas that of omphacite is much stronger ($AV_P=3.7-5.9%$ and $AV_S=2.9-3.8%$). Seismic anisotropy of the omphacite-rich layers shows an increase of 329% for $AV_P$ and 146% for $AV_S$ relative to the garnet-rich layers. Our results demonstrate the importance of the layered structure in strain localization and in the development of the seismic anisotropies of subducting oceanic crust.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2008년도 Asian Magnetics Conference
• /
• pp.231.1-231.1
• /
• 2008

• 한국자기학회지
• /
• 제8권6호
• /
• pp.350-356
• /
• 1998

Sol-gel법을 이용하여 합성한 자성 garnet Y3-xLaxFe5O12(x=0.0, 0.25, 0.5, 0.75, 1.0) 분말과 박막의 결정 및 자기적 성질에 관하여 X-선 회절기, atomic force microscopy(AFM), scanning electron microscopy(SEM), 진동시료자화기 (VSM)와 Mossbauer 부노강기를 이용하여 연구하엿다. X-선 회절분석 결과와 Mossbauerqnsrhkd 실험으로부터 100$0^{\circ}C$에서 열처리한 x=0.75 이하의 Y3-xLaxFe5O12 분말의 경우 모두 순수한 cubic의 garnet 구조가 형성되었음을 확인 할 수 있었으나, x=1.0인 경우는 LaFeO3상이 함께 관측되었다. Garnet 박막의 성장을 위하여 75$0^{\circ}C$에서 2시간의 열처리로 결정화를 이루었으며, 성장한 박막은 특정한 방향성 없이 성장하였음을 알 수 있었다. Mossbauer 분광기를 이용하여 측정한 결과는 산화물을 통하여 제조한 garnet 분말의 Mossbauer spectrumthk 일치함을 알 수 있었다. 전자 현미경의 측정을 통한 분말의 입자크기는 200~300nm이며, AFM의 측정으로부터 박막의 평균 표면 거칠기가 3.17nm임을 알 수 있었다. 진동시료자화기를 이용하여 측정한 garnet 분말과 박막의 자기적 특성은 전형적인 연자성의 자기적 속성을 가지며, garnet 분말의 경우 최대 포화자화 (30 emu/g)와 최소 보자력 (52 Oe)을 가짐을 알 수 있엇다. 80$0^{\circ}C$에서 열처리한 순수한 garnet 박막시료의 경우 수직 및 수평방향으로 측정한 자화곡선은 수직방향으로 측정한 자화곡선이 낮은 포화자화를 가지며 보자력은 양방향 모두 37 Oe를 나타냈다.

• 한국세라믹학회지
• /
• 제54권4호
• /
• pp.278-284
• /
• 2017

In this work, Ta-substituted $Li_7La_3Zr_{2-x}O_{12}$ (LLZTO) powder and pellets with garnet cubic structure were fabricated and characterized by modified and optimized sol-gel synthesis. Ta-substituted LLZO powder with the smallest grain size and pure cubic structure with little pyrochlore phase was obtained by synthesis method in which Li and La sources in propanol solvent were mixed together with Zr and Ta sources in 2-methoxy ethanol. The LLZTO pellets made with the prepared powder showed cubic garnet structure for all conditions when the amount of Li addition was varied from 6.2 to 7.4 mol. All the X-ray peaks of the pyrochlore phase disappeared when the Li addition was increased above 7.0 mol. When the final sintering temperature was varied, the LLZTO pellet had a pyrochlore-mixed cubic phase above $1000^{\circ}C$. However, the surface morphology became much denser when the final sintering temperature was increased. The sol-gel-driven LLZTO pellet with a sintering temperature of $1100^{\circ}C$ showed a lithium ionic conductivity of 0.21 mS/cm when Au was adopted as electrode material for the blocking capacitor. The results of this study suggest that modified sol-gel synthesis is the optimum method to obtain cubic phase of LLZTO powder for highly dense and conductive solid electrolyte ceramics.

• Medical Lasers
• /
• 제9권2호
• /
• pp.184-186
• /
• 2020

Lower eyelid blepharoplasty is a popular facial rejuvenation surgery that restores the infraorbital region. The procedure is performed by removing excessive fatty tissues, muscles, and other unnecessary structures. The structure of the eyelid differs from person to person and is quite complex; therefore, numerous side effects are expected. Common lower eyelid blepharoplasty complications are asymmetrical faces, retrobulbar hemorrhage, blurred vision, and ectropion. This paper reports a case of a prominent periorbital vein after lower eyelid blepharoplasty. The prominent periorbital vein after surgery is a rare side effect that has not been reported to the best of the author's knowledge. This case was treated with a long-pulse 1,064-nm neodymium:yttrium-aluminum-garnet laser.

• Corrosion Science and Technology
• /
• 제4권1호
• /
• pp.33-38
• /
• 2005

Some feasibility studies are conducted to produce an advanced ceramic coating, which reveals superior chemical and mechanical strength, on metal base structure used in chemical plant. This advanced coating on metallic frame can replace ceramic delivery pipe and reaction chamber used in chemical plant, which are operated in hi-temperature and corrosive/erosive environment. An dual spraying is adopted to reduce the residual stress in order to increase the coating thickness and the residual stress is estimated by in-situ manner. Then new methodology is tried to form special coating of yttrium aluminum garnet(YAG), which reveals hi-strength and low-creep rates at hi-temperature, superior anti-corrosion property, hi-stability against Alkali-Vapor corrosion, and so on, on iron base structure. To verify the formation of YAG during thermal spraying, XRD(X ray diffraction) technique was used.

• 한국자기학회지
• /
• 제5권5호
• /
• pp.720-725
• /
• 1995

Bi-substituted gadolinium iron garnet films were deposited on GGG(111) and NGG (111) substrates by irradiating KrF excimer laser onto targets having compositions of $Bi_{x}Gd_{3-x}Fe_{5}O_{12}$ ($2.0{\leq}x{\leq}3.0$) under substrate temperature of $580~620^{\circ}C$. Analysis on structure, composition and angle of Faraday rotation, ${\theta}_{F}$, were carried out. The composition, the structure and the magneto-optical properties of the obtained films were found to be strongly dependent both on the compositions of the targets and on the pressure of oxygen. Before annealing in air, all films showed ${\theta}_{F}{\geq}0$ at ${\lambda}=6328{\AA}$, while several films showed ${\theta}_{F}{\leq}0$ after the annealing. The highest value of Bi-substitution up to x = 1.76 with uniform composition was obtained.

• Bulletin of the Korean Chemical Society
• /
• 제35권10호
• /
• pp.2917-2921
• /
• 2014

Cerium-activated yttrium aluminate ($Y_3Al_5O_{12}:Ce^{3+}$) exhibiting a garnet structure has been widely utilized in the production of light emitting diodes (LEDs) as a yellow emitting phosphor. The commercialized yttrium aluminum garnet (YAG) phosphor is typically synthesized by a solid-state reaction, which produces irregular shape particles with a size of several tens of micrometers by using the top-down method. To control the shape and size of particles, which had been the primary disadvantage of top-down synthetic methods, we synthesized YAG:Ce nanoparticles with a diameter of 500 nm using a coprecipitation method under the atmospheric pressure without the use of template or special equipment. The precursor particles were formed by refluxing an aqueous solution of the nitrate salts of Y, Al, and Ce, urea, and polyvinylpyrrolidone (55 K) at $100^{\circ}C$ for 12 h. YAG:Ce nanoparticles were formed by the calcination of precursor particles at $1100^{\circ}C$ for 10 h under atmospheric conditions. The phase identification, microstructure, and photoluminescent properties of the products were evaluated by X-ray powder diffraction, scanning electron microscopy, absorption spectrum and photoluminescence analyses.

• 한국전기전자재료학회논문지
• /
• 제20권6호
• /
• pp.536-540
• /
• 2007

The Ce-doped YAG(Yttrium Aluminum Garnet, $Y_3Al_5O_{12}$) phosphor powders were synthesized by combustion method. The luminescence, formation process and structure of phosphor powders were investigated by means of XRD, SEM and PL. The XRD patterns show that YAG Phase can form through sintering at $1000^{\circ}C$ for 2 h. This temperature is much lower than that required to synthesize YAG phase via the conventional solid state reaction method. There were no intermediate Phases such as YAP(Yttrium Aluminum Perovskite, $YAlO_3$) and YAM(Yttrium Aluminum Monoclinic, $Y_4Al_2sO_9$) observed in the sintering process. The powders absorbed excitation energy in the range $410{\sim}510\;nm$. Also, the crystalline YAG:Ce showed broad emission peaks in the range $480{\sim}600\;nm$ and had maximum intensity at 528 nm.

• Journal of Magnetics
• /
• 제12권3호
• /
• pp.129-132
• /
• 2007

Bismuth-substituted yttrium iron garnet (Bi:YIG, $Bi_{0.5}Y_{2.5}Fe_5O_{12}$) films were deposited with aerosol deposition method and their magnetic and optical properties were investigated as a function of annealing temperature. Since the ceramic films deposited with aerosol deposition method have not a perfect crystal structure due to non-uniform internal stress occurred by mechanical collision during their deposition, the post annealing could be a key process to release its internal stress and to improve its micro structure for optimizing the magnetic and magneto-optic properties of films. The crystallinity of Bi: YIG film was improved with increase of annealing temperature, and the saturation magnetization increased up to 87 emu/cc at $800^{\circ}C$. The Faraday rotation increased up to $1.4deg/{\mu}m$ by annealing at $700^{\circ}C$ around the wavelength of $0.5{\mu}m$. The optical transmittance of the Bi:YIG film was also improved in visible region.