• 제목/요약/키워드: garnet powder

검색결과 40건 처리시간 0.024초

연소합성법으로 제작한 $Y_3Al_5O_{12}:Eu^{3+}$ 나노형광체의 광학적 특성 (Photoluminescence Characteristics of $Y_3Al_5O_{12}:Eu^{3+}$ Nano-Phosphors by Combustion Method)

  • 곽현호;김세준;박용서;최형욱
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
    • /
    • pp.406-407
    • /
    • 2008
  • For this study, Yttrium aluminum garnet (YAG) particles doped $Eu^{3+}$ ions were prepared via the combustion process using the 1:1 ratio of metal ions to reagents. The characteristics of the synthesized nano powder were investigated by means of X-ray diffraction (XRD), Scanning Electron Microscope (SEM), and photoluminescence (PL). The various YAG peaks, with the (420) main peak, appeared at all sintering temperature XRD patterns. The YAG phase crystallized with results that are in good agreement with the JCPDS diffraction file 33-0040. The SEM image showed that the resulting YAG:Eu powders had larger sizes with the increse in the sintering temperature. The grain size was about 50nm at $1000^{\circ}C$. The PL intensity of $Eu^{3+}$ has the line peaks of 598, 610, 632nm and has main peak at 591nm.

  • PDF

Preparation of Y3Al5O12 Nanocrystals by a Glycol Route

  • Bartwal, Kunwar Singh;Kar, Sujan;Kaithwas, Nanda;Deshmukh, Monica;Dave, Mangla;Ryu, Ho-Jin
    • 한국세라믹학회지
    • /
    • 제44권5호
    • /
    • pp.151-154
    • /
    • 2007
  • Yttrium aluminum garnet, $Y_3Al_5O_{12}$ (YAG) is an extensively used solid-state laser host material. YAG nanocrystals were synthesized using low-temperature glycol method, a modified sol-gel method performed at low temperature that consists of a mixture of salts that are mostly nitrates in an aqueous media. Single-phase nanocrystalline YAG was obtained at $850^{\circ}C$, which is a much lower temperature than with other techniques such as a wet-chemical technique. The structural characterization is done by powder X-ray diffraction, scanning electron microscopy and transmission electron microscopy. A crystallite size range of 20-50 nm was observed for the materials prepared at $850-950^{\circ}C$.

졸-겔법에 의한 Cerium 치환 Nanosize YIG 분말의 합성 및 자기적 특성 (Synthesis and Magnetic Properties of Nanosized Ce-substituted Yttrium Iron Garnet Powder Prepared by Sol-gel Method)

  • 장학진;김광석;윤석영;김태옥
    • 한국세라믹학회지
    • /
    • 제38권11호
    • /
    • pp.1008-1014
    • /
    • 2001
  • Nanosize의 YIG 분말을 자기광학효과에 뛰어난 첨가제인 Cerium을 첨가하여 에틸렌 글리콜 용매로서 졸-겔법을 이용하여 합성하였다. 점도와 pH가 일정한 값을 유지하고, aging시간에 따라 점도변화가 없는 120분에서 150분사이의 반응시간에서 가장 안정한 상태의 용액을 얻을 수 있었다. 건조시킨 YIG 분말로서 DTA 및 XRD 측정결과 80$0^{\circ}C$에서 단일상의 YIG를 합성할 수 있었고, Cerium 첨가량 증가에 따라 12면체 Y 이온 자리로의 치환에 의해 격자상수가 12.3921에서 12.4130$\AA$까지 증가하는 경향을 보였다. 80$0^{\circ}C$에서 105$0^{\circ}C$까지 열처리 온도 증가에 따라 평균입자크기는 40nm~330nm정도를 보였고, 포화자화값(M$_{s}$)은 YIG 결정성 증대 및 미량의 orthoferrite의 감소에 의해 18.37~21.25emu/g으로 증가하였으며, 보자력(H$_{c}$)은 80$0^{\circ}C$부터 90$0^{\circ}C$ 사이에서는 증가하다가, 그 이상 온도에서는 감소하는 경향을 보였다. Ce 첨가량이 증가함에 따른 보자력값은 큰 변화가 없었으며, 포화자화값은 0.1 mol%일 때 가장 큰 값을 지녔고, 이후 미량의 orhtoferrite 증가로 인해 감소하는 경향을 보였으나, 큐리 온도(T$_{c}$)에는 영향을 미치지 않았다.않았다.

  • PDF

$\alpha-SiC $seed의 첨가가 상압소결된 $\beta-SiC$의 미세구조와 파괴인성에 미치는 영향 (Effect of $\alpha-SiC $seed on microstructure and fracture toughness of pressureless-sintered $\beta-SiC$)

  • Young-Wook Kim;Won-Joong Kim;Kyeong-Sik Cho;Heon -Jin Choi
    • 한국결정성장학회지
    • /
    • 제7권1호
    • /
    • pp.18-26
    • /
    • 1997
  • 소결조제로 Y 3Alo012를 첨가한 {3- SiC 분말에 seed로서 1 wt%의 a- SiC 분말을 첨 가한 시편과 첨가하지 않은 시편을 1950$^{\circ}$C, argon 분위기에서 0.5~4시간 동안 소결하였다. S Seed로써 1 wt% a-SiC 분말의 첨가는 소결 도중에 길게 자란 업자틀의 성장을 가속시켰고, a a- SiC seed를 첨가한 시편에서 더 조대한 미세구조가 얻어졌다 .. a-SiC seed를 첨가하여 4시간 동안 소결한 시편의 파괴인성은 7.5 MPa'ml/2이었고, seed를 첨가하지 않은 시편의 파괴인성은 6 6.1 MPa'm1/2이었다 .. Seed를 첨가한 시편의 높은 파괴인성은 조대한 미세구조에 포함된 길게 자란 입자들에 의한 균열가교 기구의 활발한 작용에 기인한다.

  • PDF

열처리온도가 고상에피택시 YIG박막의 특성에 미치는 영향 (Effects of Annealing Temperature on the Properties of Solid Phase Epitaxy YIG Films)

  • 장평우
    • 한국자기학회지
    • /
    • 제13권6호
    • /
    • pp.221-225
    • /
    • 2003
  • 통상적인 rf 스파터 장비와 YIG 타켓으로 수 $\mu\textrm{m}$의 Fe-Y-O 비정질상을 Ga-Gd Garnet(GGG) (111) 기판위에 만든 다음 550-105$0^{\circ}C$의 온도에서 대기 중 열처리할 때 열처리온도가 결정특성과 자기특성에 미치는 영향을 조사하였다 .Fe-Y-O 비정질상의 결정화온도는 졸-겔 분말의 결정화온도보다 훨씬 낮은 600-$650^{\circ}C$이었으며, $650^{\circ}C$ 이상에서 열처리하면 YIG(888)면의 피크의 강도는 GGG(888) 면 회절강도의 80%정도이고 YIG(888)면의 록킹곡선의 반가폭도 0.14$^{\circ}$보다 작아 YIG박막의 우수한 에피택시성장을 확인하였다. 열처리온도가 높을 경우 격자상수가 작아지면서 YIG(888)면의 회절선이 강해지고 좁아져서 높은 온도가 YIG박막의 고상에피택시성장에 유리하였으며 이것은 자화곡선에서도 확인되었다. 또한 높은 온도에서 열처리된 박막에서 수직이방성이 유도되었으며 이것은 기판과 박막의 0.15%의 격자불일치 때문에 생기는 것이다.

$Eu^{3+}$ 농도에 따른 $Y_3Al_5O_{12}:Ce^{3+},Eu^{3+}$ 형광체의 광학적 특성 (Photoluminescence Characteristics of $Y_3Al_5O_{12}:Ce^{3+},Eu^{3+}$ Phosphors by $Eu^{3+}$ ions)

  • 곽현호;김세준;박용서;최형욱
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
    • /
    • pp.441-442
    • /
    • 2008
  • For this study, Yttrium aluminum garnet (YAG) particles co-doped with $Ce^{3+}$ and $Eu^{3+}$ were prepared via the combustion process using the 1:1 ratio of metal ions to reagents. The characteristics of the synthesized nano powder were investigated by means of X-ray diffraction (XRD), Scanning Electron Microscope (SEM), and photoluminescence (PL). The various YAG peaks, with the (420) main peak, appeared at all Eu concentrationin XRD patterns. The YAG phase crystallized with results that are in good agreement with the JCPDS diffraction file 33-0040. The SEM image showed that the resulting YAG:Ce,Eu powders had uniform sizes and good homogeneity. The grain size was about 50nm. The photoluminescence spectra of the YAG:Ce,Eu nanoparticles were investigated to determine the energy level of electron transition related to luminescence processes. It was composed a broad band of $Ce^{3+}$ activator into the weak line peak of $Eu^{3+}$ in YAG host. The PL intensity of $Ce^{3+}$ has the wavelengths of 480-650 nm and The PL intensity of $Eu^{3+}$ has main peak at 590nm.

  • PDF

SAE 1078 강의 오스템퍼링 열처리시 가스 퀜칭 속도에 따른 미세조직의 변화 (Change in Microstructure with the Gas Quenching Rate during Austempering Treatment of SAE 1078 Steel)

  • 권기훈;박현준;여국현;이영국;김상권
    • 열처리공학회지
    • /
    • 제36권3호
    • /
    • pp.121-127
    • /
    • 2023
  • When high carbon steel is heated in an appropriate austenizing temperature range and subjected to austempering, the size and shape of lamellar structure can be controlled. The high carbon steel sheet having the pearlite structure has excellent elastic characteristics because it has strong restoring force when properly rolled, and is applied in a process known as patenting-process using lead bath. In the case of isothermal treatment using lead-medium, it is possible to quickly reach a uniform temperature due to high heat transfer characteristics, but it is difficult to replace it with process technology that requires treatment to remove harmfulness lead. In this study, we intend to develop fluidization technology using garnet powder to replace the lead medium. After heating the high-carbon steel, the cooling rate was changed by compressed air to the vicinity of the nose of the continuous cooling curve, and then maintained for 90 s and then exposed to room temperature. The microstructure of the treated specimens were analyzed and compared with the existing products treated with lead bath. The higher the flow rate of compressed air, the faster the cooling rate to the pearlite transformation temperature, so lamellar spacing decreases and the hardness tends to increase.

비씨 제이드의 보석학적 연구 (Gemological Characterization of B. C. Jade)

  • 김원사
    • 한국광물학회지
    • /
    • 제21권2호
    • /
    • pp.177-182
    • /
    • 2008
  • 캐나다 브리티시 콜럼비아주 카시아르광산에서 산출되는 B.C. jade에 대한 보석학적 특징을 알아보기 위하여 편광현미경 관찰, 경도, 굴절율 및 비중 측정, X-선회절분석, X-선형광분석, ICP-MS, 적외선흡수분광분석, 시차열분석/열중량분석 등을 실시하였다. B.C. jade는 짙은 녹색을 띠고 반투명하며, 지방광택을 나타내며, 주구성광물은 투각섬석-양기석 고용체이다. 미량의 석류석과 미화인된 불투명광물이 공생한다. 모스 경도는 $5.5{\sim}6$, 굴절율은 1.62, 비중 3.01이다. 인성이 강하며 침상단구를 나나낸다. Fe의 함량이 높으며($Fe_2O_3\;4.14{\sim}4.66\;wt%$) 녹색을 띠게 하는 발색소 역할을 하는 것으로 해석된다. B.C. jade는 $926.9^{\circ}C$에서 탈수현상이 일어나면서 파괴되기 시작하며, $1000.8^{\circ}C$에서 투각섬석-양기석이 투휘석+엔스타타이트+석영+물($H_2O$)로 분해되는 반응이 거의 완결되는 것으로 해석된다. 이러한 가능성은 $926.9^{\circ}C$ 이상에서 1.93 wt%의 중량손실이 일어나는 열중량 분석결과와 잘 일치한다.

모로코인(人)의 장신구(裝身具)와 화장(化粧)에 관(關)한 연구(硏究) (A Study of the Personal Ornaments and Make-up of Maroccan)

  • 이순홍
    • 패션비즈니스
    • /
    • 제5권2호
    • /
    • pp.15-34
    • /
    • 2001
  • Ornaments are accessories for the decoration of the body or dress. They aren't unavoidably required one, but serve to make one's dress perfect as decorative industrial art objects. In Morocco, ornaments were initially used as a sign of social position or the class or an incantatory symbol. In effect, they were originally employed to adjust one's dress, not just for decoration, and they were of use for household economy. Gold, silver and handcraft available for exchange were a means of increasing one's property and an indication of social standing and wealth. In particular, the dress and jewelry of a bride was a measure of her family's wealth, regarded as a symbol of her chastity and value. The ornaments symbolically back up people's faith in supernatural power, and their real value is based on implicit form or way of decoration, not the external shape. Specifically, there is a tendency to use the form of animal as a protector, not one to frighten people. In the artistic tradition of Morocco, fish pattern stands for water and rain, and eagle and bird are considered to be related to fate. Scorpion and lizard are depicted as an inquirer of sun, and snake is a symbol of abundance and sexual instinct, being viewed to have an ability to cure disease. Turtle pattern is a symbol of saint because it protects one from the evil. The ornaments are made of gold, silver, amber, clam, garnet, glass, nielle, enamel, glaze, coral or tree, and symbolic patterns are used, including hand(a symbol of five numerals), turtle, lizard, scorpion, eye, triangle, bird and eggs. They are very big and diverse, being categorized into ornaments for the head or the chest, neckless, fibula, earring, bracelet and ring. For Moroccans, make-up is a sort of instinctive behavior to meet aesthetic and sexual desire. They also wear make-up for practical purpose of protection, intentionally inflict a wound on the skin for ceremonial or religious purpose, paint the skin with pigment, or have the part of the body tattooed for incantatory purpose. All this actions are regarded as make-up. The raw material of cosmetics is aker, a vegetable dye. They get the lips or cheeks turn red and paint eyebrows with yellow saffran powder to have a bad devil lose its strength. Tattooing is mainly done by women and viewed as a sign of their value or social organization they belong to. Sometimes that is used to represent a woman's being old enough to marry or getting married already or the frequency of marriage. Besides, tattoo is believed to prevent or remedy loose bowels or cough, depending on its location or pattern, and they often change tattoo according to the change of beauty art.

  • PDF

멀티 앤빌 프레스의 압력-부하 보정 작업과 시료 내의 온도구배 연구 (Pressure-load Calibration of Multi-anvil Press and the Thermal Gradient within the Sample Chamber)

  • 김은정;이성근
    • 한국광물학회지
    • /
    • 제31권3호
    • /
    • pp.161-172
    • /
    • 2018
  • 멀티 앤빌 프레스(multi-anvil press)는 일반적으로 5-25 GPa의 압력범위와 ${\sim}2,300^{\circ}C$의 온도범위를 구현할 수 있는 고압 기기로, 지구과학에서는 상부맨틀-맨틀전이대까지의 지구 구성물질의 구조를 연구하는 데 도움이 된다. 본 연구에서는 광물의 상전이를 이용한 멀티 앤빌 프레스에 대한 압력-부하 보정(pressure-load calibration) 과정을 소개하고, 시료실(sample chamber) 내에 존재할 수 있는 온도구배에 대해서 논의하였다. 압력-부하 보정은 14/8 G2, 14/8 step, 14/8 HT 조립세트(assembly set)와 18/12 조립세트에 대해 1,100톤 멀티 앤빌 프레스를 이용하여 수행했다. 초기 물질로 석영, 규회석구조의 $CaGeO_3$, 포르스테라이트를 사용했고, 고압상의 동정은 XRD 분석을 통해 수행하였다. 광물의 상전이를 통해 $1,200^{\circ}C$에서 시료에 가해지는 압력을 유추할 수 있었으며, ${\alpha}$-석영에서 코에사이트로의 상전이는 3.1 GPa, 석류석 구조의 $CaGeO_3$에서 페로브스카이트 구조의 $CaGeO_3$로의 상전이는 5.9 GPa, 코에사이트에서 스티쇼바이트로의 상전이는 9.2 GPa, 포르스테라이트에서 와즐리아이트로의 상전이는 13.6 GPa의 압력 확인에 이용했다. XRD 결과로 획득한 압력-부하 보정 곡선은 기존에 보고된 유사한 기기의 압력-부하 보정 곡선에 비해 동일 압력을 구현하기 위해 50톤 가량의 유압이 더 필요한 것으로 확인됐다. 이러한 차이는 시료실의 크기 및 조립세트의 압력 매체(pressure medium)와 이차앤빌 사이의 마찰력으로부터 기인한 유압 손실에 의한 것으로 생각된다. 또한 본 연구에서는 14/8 HT 조립세트에서의 시료실 내의 온도구배를 확인했다. 특히 열전대(thermocouple)의 위치 변화에 따라 시료실 높이에 평행한 방향으로 약 ${\sim}200^{\circ}C/mm$에 해당하는 온도구배가 존재한다. 본 연구로부터 구한 멀티 앤빌 프레스의 압력-부하 보정 곡선과 시료실 내의 온도구배 값은 앞으로 맨틀 내에서의 다양한 비정질 및 결정질의 지구물질에 대한 원자 구조의 변화와 그에 따른 물성 변화를 설명하는 데 적용할 수 있다.