• Proceedings of the Korean Nuclear Society Conference
• /
• 1995.05a
• /
• pp.636-643
• /
• 1995

The accurate determination of the fuel-cladding gap conductance as functions of rod burnup and power level may be a key to the design and safety analysis of a reactor. The incorporation of a sophisticated gap conductance model into nuclear design code for computing thermal hydraulic feedback effect has not been implemented mainly because of computational inefficiency due to complicated behavior of gap conductance. To avoid the time-consuming iteration scheme, simplification of the gap conductance model is done for the current design model. The simplified model considers only the heat conductance contribution to the gap conductance. The simplification is made possible by direct consideration of the gas conductivity depending on the composition of constituent gases in the gap and the fuel-cladding gap size from computer simulation of representative power histories. The simplified gap conductance model is applied to the various fuel power histories and the predicted gap conductances are found to agree well with the results of the design model.

• Journal of the Korean Data and Information Science Society
• /
• v.19 no.3
• /
• pp.893-901
• /
• 2008

The disconfirmation paradigm is the earliest researched and the most deeply researched of all the paradigms in marketing. Disconfirmation paradigm deals with the influence of expectation, perceived product performance, and the discord between the two on consumer satisfaction. The GAP-Model is based on the disconfirmation paradigm that tries to understand the effect of the gap between before purchase expectations and after purchase perceptions of the product performance on dependent variables such as customer satisfaction. The purpose of this research is to test whether regression coefficients of a P-Model(performance only model), an E-Model(expectation only model) and GAP(P-E)-Model are equivalent in explaining service value and loyalty. The Chow's F-Test is used to test the excellence of the 3 models. As a result of comparison and analysis, P-Model showed more excellence of service value and loyalty than E-Model or GAP-Model.

• International Journal of Highway Engineering
• /
• v.18 no.5
• /
• pp.95-103
• /
• 2016

PURPOSES : Permitted left turn is a turning maneuver in which a vehicle turns left using a gap between oncoming vehicles, called gap acceptance, and it enables for more efficient traffic operation at intersections. In Korea, the permitted left turn has not been a common maneuver at signalized or un-signalized intersections. However, many experts and the Police Agency tried to apply this effective turning maneuver at intersections in Korea since 2010. Though the investigation of gap acceptance is significantly important in understanding a driver's behavior at intersections, there have not been many studies about this topic, specifically a study to develop probability models of gap acceptance behavior. METHODS : In this study, the probability model of gap acceptance behavior for a permitted left turn was developed based on observational field studies. To develop the model, seven variables were analyzed including gap, waiting time, traffic volume, conflict-flow vehicle type, left-turning vehicle type, the number of lane, and time. RESULTS : In the final model, gap and left-turning vehicle type were found to be significant influencing factors. CONCLUSIONS : Through this model development, it was concluded that as the gap size increased, the probability of gap acceptance was higher. Moreover, when a left-turning vehicle was a passenger car, the probability of gap acceptance was higher than compared to large size buses or freight cars.

• Journal of Korean Society of Transportation
• /
• v.4 no.2
• /
• pp.3-14
• /
• 1986

This study was undertaken to develop the gap acceptance model of left-turn drivers on the major road at intersections. Typical unsignalized intersections on the two-lane and four-lane streets in Masan City were selected for the study intersection. For the gap distribution model, the lognormal, negative exponential, shifted negative exponential, and Gamma distributions were tested using the x2 and K-S tests. Based on the results for both streets, it was concluded that among the distributions tested the lognormal distribution represented the gap distribution best, followed by the shifted negative exponential distribution. Stochastic models of the gap-acceptance behavior of left-turn drivers on the major road at unsignalized intersections were programmed using SLAM Ⅱ, a simulation computer language. A stochastic model was selected for the gap-acceptance behavior to compare the results of the simulation with the observed data. The model assumes that a fixed critical acceptance gap is assigned to each left-turn driver based on a normal distribution and the gap distribution of the opposing traffic stream follows the shifted negative exponential distribution.

• Nuclear Engineering and Technology
• /
• v.27 no.3
• /
• pp.344-357
• /
• 1995

The gap conductance between the fuel and the sheath depends strongly on the gap width and has a significant influence on the amount of initial stored energy. The modified Ross and Stoute gap conductance model in ELESTRES is based on a simplified thermal deformation model for steady-state fuel temperature calculations. A review on a series of experiments reveals that fuel pellets crack relocate, and are eccentrically positioned within the sheath rather than solid concentric cylinders. In this paper, the hue recently-proposed gap conductance models (offset gap model and relocated gap model) are described and are applied to calculate the fuel-sheath gap conductances under experimental conditions and normal operating conditions in CANDU reactors. The good agreement between the experimentally-inferred and calculated gap conductance values demonstrates that the modified Ross and Stoute model was implemented correctly in ELESTRES. The predictions of the modified Ross and Stoute model provide conservative values for gap heat transfer and fuel surface temperature compared to the offset gap and relocated gap models for a limiting power envelope.

• Journal of Distribution Research
• /
• v.1 no.2
• /
• pp.29-52
• /
• 1996

The objective of this study is to test Parasurman, Zeithaml & Berry(1985)'s service quality gap analysis model, and to confirm reliability and to confirm reliability and validity of the model. The reliability of the model is adopted, but the validity must be retested in the further study. In the results of the gap analysis model, the correlation between consumer expectations and management perceptions of consumer expectations(gap1) was not accepted. The correlation between management perceptions of consumer expectations and service quality specifications(gap2), the correlation between service quality specifications and the service actually delivered(gap3), and the correlation between services delivered and services promised to consumers(gap4) were accepted. To improve domestic telecommunication service quality, practical guides such as standardization of job roles, cooperation among customer-contact persons, communication between managers and employees, evaluation programs for employee's improvement of service quality, appropriate supports for customer-contact persons were suggested. For generalizing the gap model, additional studies under the different contexts and industries will be needed.

• Management Science and Financial Engineering
• /
• v.16 no.2
• /
• pp.17-27
• /
• 2010

The customer churn and the forecast of customer churn have been important research topics for a long time in the academic domain of customer relationship management. The customer value is studied to construct a gap model based on dual customer values; a basic description of customer value is given, then the gaps between products and services in different periods for the customers and companies are analyzed. The main factors that influence the perceived customer value are analyzed to define the "recognized value gap" and a gap model for the dual customer value is constructed. Based on the dual customer gap a con-ceptual model to determine potential churn customers is proposed in the paper.

• International Journal of Contents
• /
• v.13 no.4
• /
• pp.47-62
• /
• 2017

This paper analyzes how much the gap existed between the public group and expert group using future issues and future core technologies that are announced in government institutions based on ontology. We calculated gap with two groups' point of view, one is expert groups' ideas that are based on future hopeful technologies documents, and another is public people ideas that are based on documents of contest that is hosted by 'Ministry of Science, ICT and Future Planning (MSIP)', and 'Institute for Information & communications Technology Promotion (IITP)'. For calculating these, we suggested SDGM model. In the case of ETRI Meta-trend ICT Field, there is a little gap between expert group and public group, and another case that is XT (ETRI determined future technologies excluding ICT field) Field, the gap is increasing annually. Moreover, in the case of all ETRI Meta trend, the gap is bigger than ICT and XT field. We analyzed, also, KEIT's future issues for generalizing this model. The gap existed between two groups. Utilizing SDGM model of this paper, people can interpret easily how much the gap exists between future technologies and issues that are announced in institutions.

• Journal of Korean Society of Transportation
• /
• v.30 no.2
• /
• pp.93-100
• /
• 2012

This study dealt with the critical gap of roundabouts in Korea. The objective was to develop a model to derive critical gaps by analyzing gap acceptance patterns. In this context, the present study had a particular emphasis on collecting the data for accepted or rejected gaps. The main contributions of the study were as follows. First, accepted or rejected gaps were counted and measured through video frame analysis on the traffic patterns of 20 roundabouts in Korea. Based on the data, a gap acceptance model, guaranteeing the statistical significant in their parameters, was developed in the framework of the Logit model. Second, the critical gap calculated from the developed model was evaluated to be 2.584 seconds as a whole. Also, the critical gap in urban areas was estimated to be 2.744 seconds, whilst the critical gap in rural areas was estimated to be 2.416 seconds. Finally, critical gaps of roundabout in Korea were found to be smaller than those in foreign countries by about 1.5~2.5 seconds.

• Journal of Institute of Control, Robotics and Systems
• /
• v.18 no.7
• /
• pp.627-631
• /
• 2012

Observable mathematical model of DDM (Direct Dirve Motor) was suggested. The motor that operates the object system directly is called DDM. DDM has many strong points, however, it has a significant disadvantage, that it is more sensitive to the external force than the motor with reduction gear. In other word, if the force is applied, air gap of the motor can be perturbed. This causes not only difficulty in motor control but also even more serious problem, such as the breakdown of motor. However, if the air gap variation can be estimated, it can help prevent these problems. DDM should be modeled to estimate the air gap variation. The type of researched DDM is PMSM (Permanent Magnet Synchronous Motor) and precedent model of PMSM includes only characteristics of electro-magnetic system and rotational motion. However, suggested model should also include characteristics of translational motion of rotor to estimate the air gap variation. Also, this model should satisfy observability condition, because state observer is designed based on this model.