• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2007.11a
• /
• pp.129-130
• /
• 2007

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.10
• /
• pp.2065-2071
• /
• 2011

The external quality factor ($Q_e$) is controlled by coupling condition between resonator and input/output ports in design of microwave filter. In this paper, we represent extracting method of external quality factor using phase response for resonator with input/output ports according to position of feed line from microstrip line resonator. The results regarding to position, coupling gap and line width for tapped line and coupled line structure are represented, and we got the exact $Q_e$ value from the this method. This results will be applied to coupled resonator filter design.

• Journal of the Korean Society for Railway
• /
• v.19 no.5
• /
• pp.663-671
• /
• 2016

This paper investigates how to change passengers' preferences for express trains according to line extension in Seoul Metro Line 9. Before-and-after line extension, we traced passengers' path choices using Smart Card data via the method suggested by Kim et al. (2015). We developed two multinomial logit models before-and-after line extension. Transferability test showed that there is no difference between the two models. However, the load factor of the express train increased by 6.7% and the gap between the local and express trains became significantly wider.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.4
• /
• pp.351-356
• /
• 2009

A dual-mode annular ring antenna for both global positioning system(GPS) and satellite digital multimedia broad-casting(DMB) is designed. The proposed antenna consists of a coupling feed line and four slots on the annular ring patch. The gap between the feed line and the annular ring patch is used for an input impedance matching, and the slot length is used for adjusting the resonant frequency of the $TM_{21}$ mode at the DMB frequency. The antenna was fabricated and measured. The experimental results show that the antenna resonants at the GPS and DMB frequencies with suitable bandwidths, and had a broadside radiation pattern at the GPS band and a conical beam radiation pattern at the DMB band.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.28-28
• /
• 2008

Generally speaking, Rogowskii coil for magnetic flux change detection according to electric current is used for digital addition watt-hour meter, because it is not saturated at electromagnetic that not Current Transformer working by magnetic material but non-magnetic material. In this paper, we described sensitive quality an electric current coil sensor followed by the principal of Rogowskii coil on the low dielectric loss LTCC, change different line width, gap, line length at sensing parts and extinction parts.

• The Journal of Churna Manual Medicine for Spine and Nerves
• /
• v.4 no.2
• /
• pp.121-135
• /
• 2009

Objectives : This study was carried out to investigate the effects of "Yangmuji Anchu Traction Technique" on Temporomandibular Joint Disorder Patient. Methods : The therapies were Chuna("Yangmuji Anchu Traction Technique"), acupuncture treatment, Carthami-Semen Herbal Acupuncture treatment and herbal medicine. We estimated the effects of treatment by measuring from a lower front teeth to upper front teeth in open mouth, measuring a gap of center line on front teeth in open mouth. And by measuring Visual Analog Scale(VAS) and Patient Global Assessment(PGA) before and after treatment. Results : After treatment, we confirmed these improvements : the length measuring from a lower front teeth to upper front teeth in open mouth and the gap of center line on front teeth in open mouth was improved in all cases. Also Visual Analog Scale(VAS) was improved in all cases. Conclusions : These results suggested that "Yangmuji Anchu Traction Technique" effected for Temporomandibular Joint Disorder Patient.

• Journal of the Ergonomics Society of Korea
• /
• v.25 no.4
• /
• pp.121-128
• /
• 2006

Although population of the elderly is increasing rapidly, the older adults are the least users of the Internet in Korea. Prior research suggests that older adults are physically and psychologically disadvantaged when using the Internet. With the existence of the digital divide over different age groups, the objectives of this study were to identify the current status of Internet usage of Korean adults and to suggest some alternatives for solving digital divide on Internet usage. A total of 654 Korean adults, including the elderly, participated in both on-line and off-line (on-site interview) surveys using structured questionnaires. The results of statistical analyses indicated that the gap between the percentages of Internet users in younger and older groups was significantly wide, though many older adults had strong interests of Internet. To reduce this gap on digital divide, with an appropriate help from family and government, several characteristics of the elderly should be considered in designing some age-related web sites. Some effective alternatives suggested in this study may be used as basic data for universal design of Internet-oriented software.

• Proceedings of the KIEE Conference
• /
• 2000.07c
• /
• pp.2020-2022
• /
• 2000

The cross-linked polyethylene(herein after XLPE) insulated power cable emit the methane($CH_4$)gas in the course of chemical cross-linking process. The general stranded conductor easily discharge this methane gas through the gap of each stranded wires. But the special stranded conductor that filled with semi-conducting rubber compound to prevent water penetration which is applied to water proof type of cable(22.9kV CN/CV-W), disturb the methane gas emission. The pre-mold type cable joint shall be expanded gradually by emit of gas left in XLPE insulation. For example, sometimes the corona problem outbreak on a new power distribution line, resulted from the gap between the sleeve and semi-conductive layer of cable joint. If above mentioned problem especially happened on the way of operating. We have to shut down the line and try to discharge the methane gas in cable joint. In this point, we would like to explain the mechanism of methane gas & cable joint and our test result briefly. At last, we are pleased to introduce the solution for preventing reoccurrence of this problem.

• Journal of the Korean Home Economics Association
• /
• v.20 no.3
• /
• pp.9-18
• /
• 1982

In this study, we attempted to make an original pattern of clothing for an abnormal type of figure, especially for the type of kyphosis. We measured the curvature of the spine of a woman with kyphosis with a Martin measuring instrument and a silhouetter in the following ways. First, we counted the rate of shrinkage of the standard lines drawn on the surface of the body according as the body moved. Secondly, placing the front and back darts, the front and back shoulder darts and the side darts according to“Munhwa”pattern, we made cubic cuttings of four moving postures as well as the standing one. Thirdly, we superposed the developed patterns of the standing and the moving postures, measuring the position change and the amount of the chaange of the darts, and compared them. The results are as follows: 1) In the developed pattern of a cubic cutting of the basic pattern and the standing posture, the neckhole became larger than that of the basic pattern, and the waist line was lowered than that of the basic pattern because the center back line was shortened due to the curved backbone. 2) As for the change of the standard line according to the movement, we found that the waist line, the center front line, the center back line, the bust width line, the upper back width line and the back width line became longer. Special consideration must be given to the function of the clothing for an abnormal type of figure. 3) The difference of the measurements between the cubic cutting and the body measurement regardless of the body movement is due to a gap by an acute angle at the jutted place between the developed pattern and the body surface. We found that the body measurement of the upper back width line, the back width line and the bust line became larger. Consequently, in making an original clothing pattern, it is desirable that we must not place the front and the back waist darts at the jutted place on the back from the functional and the aesthetic viewpoint of clothing. It is also desirable that we must widen the neckhole because the shoulder angle is close to a straight line due to a jut of the upper back width line.

• Journal of Periodontal and Implant Science
• /
• v.30 no.2
• /
• pp.455-472
• /
• 2000

Instrumentation for periodontal therapy may induce marginal damage which increases plaque accumulation and result in periodontal disease. But there have not been many reports of instrumentations on the artificial crown so far. Therefore this study is conducted to evaluate the effects of various repeated instrumentations on the porcelain crown marginal portion. Of the 10 extracted periodontally diseased maxillary first premolars, were 12 proximal surface used in this study. The finishing line of the preparation was placed on the root surface below CEJ and then the crown was cast and cemented in usual manner. Every 4 surfaces of the 3 instruments-curet, ultrasonic scaler, and ultrasonic curet- is used. and four samples used in each instruments. The relevant procedures and measurements were repeated 3 times in each surfaces. Marginal gap is measured by the microscope and surface roughness, Scannig Probe Microscope. Measurements are made at 5 points in each surfaces, making 20 points in each instrument. The results evaluated statistically were as follows 1. As instrumentation was repeated, both marginal gap and roughness were increased in all group 2. In the hand curet, marginal gap was increased every instrumentation and roughness was increased after second. 3. In the ultrasonic scaler, both marginal gap and roughness were increased every instrumentation. 4. In the ultrasonic curet, marginal gap was increased after third instrumentation and roughness was increased after second. 5. Marginal gap and roughness used by the ultrasonic curet were lower than the others and no difference was seen between the hand curet and ultrasonic scaler From the results of this study, the ultrasonic curet was useful in some aspect, but careful instrumentation was needed. Furthermore it was important to minimize the instrumentation through complete periodontal therapy before setting and adequate plaque control.