• 한국방사선학회논문지
• /
• 제16권3호
• /
• pp.217-223
• /
• 2022

본 연구는 엑스선 흉부촬영에서 격자를 이용하여 촬영법과 Air Gap Technique을 이용한 촬영법에서 얻은 영상을 평가하기 위하여 대학병원 영상의학과에서 10년 이상 근무한 방사선사 선생님 5인에게 주관적 평가 ROC와 객관적 평가 SNR를 시행하였다. 분석한 결과는 Cronbach Alpha 값이 0.714로 유의하게 높았다. Air Gap Technique 촬영법에서 팬톰과 상수용체 간격을 20 cm 띄우고 관전압 100 kVp, 관전류와 촬영시간 8 mAs로 설정하고 촬영한 영상을 ROC 평가에서 18점, SNR 평가에서 6.149로 가장 높은 점수를 얻었다. 또한 격자를 이용하여 촬영법에서는 팬톰과 상수용체 간격을 15 cm 띄우고 관전압 110 kVp, 관전류와 촬영시간을 8 mAs에서 촬영 시 ROC 평가점수가 19점과 객관적평가인 신호대잡음비(SNR)가 6,622으로 가장 높은 점수를 받았다. 이에 격자를 이용하여 나타나는 격자의 cut-off 현상으로 인하여 재촬영뿐만 아니라 판독지연, 환자의 피폭선량 증가, 기계적 수명단축 등의 단점을 벗어나는 Air Gap Technique 촬영법을 활용한다면, 중환자실 및 응급환자를 위한 이동형 엑스선 촬영장비를 사용할 경우를 포함하여 흉부 촬영 시에 많은 도움이 되리라 사료된다.

• Applied Biological Chemistry
• /
• 제39권4호
• /
• pp.260-264
• /
• 1996

Cymbidium속 난의 형질전환계를 확립하기 위해서, microprojectile bombardment 방법을 이용하여 춘란(Cymbidium virescence)의 rhizome 조직세포에 외래 유전자를 도입하는 조건을 검토하였다. 각 parameter별 적정조건으로서 텅스텐 입자의 크기는 $1.11\;{\mu}m$, He 가스 압력은 $77.33kg/cm^2$, gap distance는 6.35mm, target distance는 7.0cm 이었다. DNA피복입자를 투사한 $400{\mu}m$ 두께의 rhizome 절편을 2개월간 배양한 뒤 GUS 활성을 조사한 결과 이 유전자가 발현되는 세포들이 관찰되었다. Kanamycin (100 mg/L)을 첨가한 배지에서 6개월 동안 선택배양을 통해 얻은 rhizome의 DNA를 PCR로 분석한 결과 nptII 유전자의 삽입을 확인할 수 있었다.

• 대한기계학회논문집B
• /
• 제31권5호
• /
• pp.491-498
• /
• 2007

Flame characteristics of a methane-air premixed flame stabilized in a heat-regenerative small combustor were investigated experimentally. A small combustor having two counter-current shallow channels and a combustion space at one side was developed. In which the channel-gap was less the ordinary quenching distance of a stoichiometric methane-air premixed flame. Two design parameters of channel gap and thickness of the middle wall, which is located between two channels for unburned and burned gases, were varied. Flame stabilization conditions and characteristic flame behaviors were experimentally examined. Conclusively, Blowout conditions were governed mostly by the scale of the combustion space, and flashback conditions into the channel are dominated by the channel gap. Surface temperatures of the combustor were between 100 to 500$^{\circ}C$. Additionally, two distinctive flame stabilization modes of radiation and well-stirred?reaction were observed and their applicability was discussed.

• 전기학회논문지
• /
• 제57권2호
• /
• pp.261-267
• /
• 2008

One of the most important issues in fence-type PDP is low luminance and luminous efficiency. To improve luminance and luminous efficiency, new sustain electrode structure which contains long discharge gap is necessary. However, it causes rise of firing voltage. In this paper, a new fence electrode structure is proposed in order to solve these problems. To drop the firing voltage, tow hump shaped electrodes is added on the main discharge electrode, and distance between two humps is controlled. The experimental results show that the test panel with the narrow horizontal gap(40um) between two humps shows low firing voltage by 17V compared with 80um gap in spit of similar luminance and luminous efficiency.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제7권3호
• /
• pp.177-182
• /
• 2007

This paper presents the see-saw type RF MEMS switch based on a single crystalline silicon structure with narrow gap vertical comb. Low actuation voltage and high isolation are key features to be solved in electrostatic RF MEMS switch design. Since these parameters in conventional parallel plate RF MEMS switch designs are in trade-off relationship, both requirements cannot be met simultaneously. In the vertical comb design, however, the actuation voltage is independent of the vertical separation distance between the contact electrodes. Therefore, the large separation gap between contact electrodes is implemented to achieve high isolation. We have designed and fabricated RF MEMS switch which has 46dB isolation at 5GHz, 0.9dB insertion loss at 5GHz and 40V actuation voltage.

• 조명전기설비학회논문지
• /
• 제25권5호
• /
• pp.79-84
• /
• 2011

In this study, breakdown characteristics of a vertical sphere-plane air gap in the presence of combustion flame were examined under the application of a.c. and d.c. high-voltages in order to investigate the effect of flame on the dielectric strength of air. Propane gas is used as the fuel of the flame, and the temperature distribution of air around the flame is measured. The polarity effects for the d.c. voltages and breakdown voltages of air when applied both of a.c. and d.c. voltages were examined in the case of the variation of the gap length and the horizontal distance between the flame and the high-voltage sphere electrode. The influence of relative air density, electrification and shape changes of the flame as factors that affect the breakdown voltages were discussed.

• 한국자동차공학회논문집
• /
• 제14권1호
• /
• pp.100-108
• /
• 2006

Time-resolved current and voltage measurements for an inductive automotive spark system were made. Also presented are measurements of the total energy delivered to the spark gap. The measurements were made in air for a range of pressures from 1-18atm, at ambient temperatures. The measured voltage and current characteristics were found to be a function of many ignition parameters; some of these include: spark gap distance, internal resistance of the spark plug and high tension wire, and pressure. The voltages presented were measured either at the top of the spark plug or at the spark gap. The measurements were made at different time resolutions to more accurately resolve the voltage and current behavior throughout the discharge process. This was necessary because the breakdown event occurs on a time scale much shorter than the arc and glow phases. The breakdown, are, and glow voltages were found to be functions of spark plug resistance, gas density, and spark plug gap as expected from the literature. Spark duration was found to decrease as either pressure or gap was increased. The transition from the arc to glow phase is usually distinguished by a sudden rise in the voltage across the gap. At pressures above about 7atm this transition was not observed suggesting that a glow phase was not present. Energy delivered to the gap increased with increasing pressure. The effective resistance of the spark gap during discharge was about twice as large for the glow phase as the arc phase.

• Structural Engineering and Mechanics
• /
• 제67권5호
• /
• pp.427-437
• /
• 2018

Structural pounding is commonly observed phenomenon during major ground motion, which can cause both structural and architectural damages. To reduce the amount of damage from pounding, the best and effective way is to increase the separation distance. Generally, existing design procedures for determining the separation distance between adjacent buildings subjected to structural pounding are based on approximations of the buildings' peak relative displacement. These procedures are based on unknown safety levels. The aim of this research is to estimate probabilistic separation distance between adjacent structures by considering the variability in the system and uncertainties in the earthquakes characteristics through comprehensive numerical simulations. A large number of models were generated using a robust Monte-Carlo simulation. In total, 6.54 million time-history analyses were performed over the adopted models using an ensemble of 25 ground motions as seismic input within OpenSees software. The results show that a gap size of 50%, 70% and 100% of the considered design code for the structural periods in the range of 0.1-0.5 s, leads to have the probability of pounding about 41.5%, 18% and 5.8%, respectively. Finally, based on the results, two equations are developed for probabilistic determination of needed structural separation distance.

• 창의정보문화연구
• /
• 제7권3호
• /
• pp.167-176
• /
• 2021

본 연구에서는 COVID-19에 따른 원격수업 현황을 조사한 연구들로부터 효과적인 원격수업을 위해 교사들에게 필요한 사항들은 분석하였다. 그 결과, 원격수업 콘텐츠 관련 지원이 필요한 것으로 나타났다. 구체적으로는 원격수업 콘텐츠 제작에 특화된 플랫폼 구축 및 콘텐츠 제작·운영 관련 교원 연수의 확충, 콘텐츠 제작 관련 저작권 제도를 개선하는 방안이 필요하다고 판단된다. 또한 원격수업은 등교수업과 체계와 특징이 다르므로 원격수업을 위한 제도적 측면의 보완도 필요하다. 원격수업에 맞는 평가 방식, 교육과정 운영 권한, 학습 관리 시스템 등에 대한 지원 필요하다고 판단된다. 아울러 원격수업을 위한 인프라 확충이 필요하며, 원격학습으로 인해 학습격차 문제가 반복되지 않도록 자기주도적 향상 프로그램 및 자기주도적 원격학습을 할 수 있는 구조 및 플랫폼도 필요한 것으로 분석되었다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2013년도 춘계학술대회 논문집
• /
• pp.1061-1062
• /
• 2013