• Journal of Soil and Groundwater Environment
• /
• v.6 no.4
• /
• pp.61-72
• /
• 2001

A barrier liner system is placed at the bottom and side slope in landfill to protect a leaking of leachate that the hydraulic conductivity of this system should be less than It 107cm/sec. In this study, the soil-bentonite mixture for the bottom liner system was evaluated in two point of views : changing characteristics of the hydraulic conductivity according to the different mixing ratio of soil-bentonite with the effect of bentonite swelling and the difference method (A & D type) of compaction on the hydraulic conductivity. As the results, maximum dry density (${\gamma}$$_{dmax}$) of SC group mixture was higher than of CL group mixture. However, the result of optimum moisture contents(OMC) of both groups were the contrary. In case of ${\gamma}$$_{dmax}$ by different compaction method, D type was higher than A. But the OMC were the contrary. The difference of ${\gamma}$$_{dmax}$ according to the Compaction energy, “SC” group mixture W3S higher than the “CL” group. In case of OMC of “CL” group was higher than “SC” group. The effecting of swelling was a little bit different on the two factors. According to the result of compaction test, the use of site soil only could not meet the criteria on hydraulic conductivity, but could find a solution for the mixing ratio of bentonite mixture were satisfied to the standard of barriation. The increased in bentonite mixing ratio and degree of swelling, the values of hydraulic conductivity were decreased. Especially the “CL” group with “D” type compaction measured the lowest value with the same conditions. Also, the bentonite mixing ratio has more influenced on the hydraulic conductivity compare with swelling effect. The “SC” group mixture with “A” typo compaction got a big difference from others. The evaluation of economic for the construction cost on the two cases, the lower bentonite mixing ratio of soil-bentonite mixed soil is more economically because of bentonite cost.

• Journal of Pharmacopuncture
• /
• v.13 no.1
• /
• pp.53-61
• /
• 2010

Purpose : To investigate the effects of the lavender, lemon and eucalyptus oil mixture on the atopy dermatitis skin lesions induced on NC/Nga Mice by dinitrochlorobenzene (DNCB). Material and Method : For this purpose, we fabricated the oil mixture blending three essential oils (lavender, lemon, eucalyptus : ELL) with one carrier oil (jojoba) and apply it on the atopic dermatitis skin lesions of NC/Nga Mice. Atopic dermatitis in NC/Nga Mice was induced by DNCB treatment on the dorsal skin of mice for 8 weeks. The mixture of ratio of each essential oil drop was 1 (eucalyptus) : 2 (lemon) : 2 (lavender) and this mixture was blended with jojoba oil 50ml (0.025%). The ELL-ointment was supplied for 8 weeks. We evaluated the effects of ELL on cell viability of mouse lung fibroblast, clinical skin features and severity, the level of serum Immunoglobulin (Ig) E & Ig G1, Interleukin (IL)-4, IL-13 and Interferon (IFN)-$\gamma$. Results : ELL showed safety on the cell viability of mouse lung fibroblast compared with control group. The cell viability was measured by SRB method. The effects of ELL on clinical skin features and severity in DNCB-induced dermatitis model of NC/Nga mice was significant compared with control group. EEL also showed significant effects on clinical symptom score compared with control group. Serum IgE & IgG1 level and development of atopy dermatitis skin lesions were evaluated. Serum IgE & IgG1 production was significantly down-regulated in EEL group compared with control group. ELL also down-regulated the levels of IL-4 and IL-13, and up-regulated the level of IFN-$\gamma$ compared with control group significantly. Conclusion : ELL was effective on atopy dermatitis by modulating Th2 related factors.

• Journal of the Korean Ceramic Society
• /
• v.41 no.6
• /
• pp.485-492
• /
• 2004

We prepared cylindrical y-alumina pellets using amorphous alumina and pore generating agent. The pellets were immersed in an aqueous solution of the mixture of Fe(NO$_3$)$_3$ㆍ9$H_{2}O$ and $CH_3$COOH. They were then hydrothermally treated at 20$0^{\circ}C$ for 3 h in autoclave, dried and calcined. For the application of environmental catalyst for its, we investigated the decomposition characteristics of 4-chlorophenol and the initiation characteristics of OH' conversion action in $O_3$ environment with or without the Fe$_2$O$_3$ supported ${\gamma}$-alumina catalyst and $O_3$ molecule.

• Journal of Applied Biological Chemistry
• /
• v.56 no.2
• /
• pp.89-93
• /
• 2013

Gamma-aminobutyric acid (GABA) aminotransferase (gabT) and succinic semialdehyde dehydrogenase (gabD) genes from Pseudomonas fluorescens KCCM 12537 were cloned into a single pETDuet-1 vector and co-expressed in Escherichia coli BL21(DE3) simultaneously. The mixture of both enzymes, called GABase, is the key enzyme for the enzymatic analysis of GABA. The molecular mass of the GABA aminotransferase and succinic semialdehyde dehydrogenase were determined to be 52.8 and 46.7 kDa following computations performed with the pI/Mw program, respectively. The GABase activity between pH 6.0 and 9.0 for 24 h at $4^{\circ}C$ remained over 75%, but under pH 6.0 decreased rapidly. The GABase activity between 25 and $35^{\circ}C$ by the treatment at pH 8.6 for 30 min remained over 80%, but over $35^{\circ}C$ decreased rapidly. When the activity against GABA was defined as 100%, the purified GABase activity against 5-aminovaleric acid having a similar structure to GABA showed 47.7% and GABase activity against ${\beta}$-alanine, ${\varepsilon}$-amino-n-caproic acid, $_L$-ornithine, $_L$-lysine, and $_L$-aspartic acid showed between 0.3 to 2.3%. The GABA content was analyzed with this co-expressed GABase, compared with the other GABase which was available commercially. As a result, the content of GABA extracted from brown rice, dark brown rice, and black rice were $26.4{\pm}3.5$, $40.5{\pm}4.7$ and $94.7{\pm}9.3{\mu}g/g$, which were similar data of other GABase in the error ranges.

• Analytical Science and Technology
• /
• v.12 no.1
• /
• pp.40-46
• /
• 1999

Zn-Ni alloy electrodeposition on steel has been examined by means of X-ray diffraction and scanning electron microscopy. The effect of current density, $Ni^{2+}$ ion concentration, and $Cl^-$ ion concentration on the structure as well as morphology of the electrodeposit have been studied. The Ni content of the electrodeposit increased with decreasing current density in the range studied in this work. The Ni content of the electrodeposit also increased with increasing $Ni^{2+}$ ion and $Cl^-$ ion concentrations. The structure change of the electrodeposit was closely related to the Ni content. In fact, the mixture phase of ${\eta}$ and ${\gamma}$ was found below 10 wt.% of Ni while the ${\gamma}$ phase only was observed above 10 wt.% of Ni. In addition, the lattice parameter, a, of then phase structure increased and the lattice parameter, c, of it decreased as the Ni content of the electrodeposit increased. The morphology of the electrodeposit varied from the plate-like shape to the fine granular shape depending upon the change in composition and structure of the electrodeposit.

• Communications for Statistical Applications and Methods
• /
• v.25 no.3
• /
• pp.245-261
• /
• 2018

Attempts have been made to define new classes of distributions that provide more flexibility for modelling skewed data in practice. In this work we define a new extension of the generalized gamma distribution (Stacy, The Annals of Mathematical Statistics, 33, 1187-1192, 1962) for Marshall-Olkin generalized gamma (MOGG) distribution, based on the generator pioneered by Marshall and Olkin (Biometrika, 84, 641-652, 1997). This new lifetime model is very flexible including twenty one special models. The main advantage of the new family relies on the fact that practitioners will have a quite flexible distribution to fit real data from several fields, such as engineering, hydrology and survival analysis. Further, we also define a MOGG mixture model, a modification of the MOGG distribution for analyzing lifetime data in presence of cure fraction. This proposed model can be seen as a model of competing causes, where the parameter associated with the Marshall-Olkin distribution controls the activation mechanism of the latent risks (Cooner et al., Statistical Methods in Medical Research, 15, 307-324, 2006). The asymptotic properties of the maximum likelihood estimation approach of the parameters of the model are evaluated by means of simulation studies. The proposed distribution is fitted to two real data sets, one arising from measuring the strength of fibers and the other on melanoma data.

• Food Science and Preservation
• /
• v.6 no.3
• /
• pp.286-291
• /
• 1999

This study was carried out to determine the effect of dose and timing of gamma irradiation and post-irradiation treatment with some preservatives of cut flowers on their longevity of rose and chrysanthemum. Cut roses which were soaked in 2% sugar solution persist to 0.75 kGy irradiation treatments. In post-treatments with some preservative solutions, the mixture group of 2% sucrose,2000m silver nitrate and 3.0% crysal were available in flower quality, but the 200 ppm silver nitrate solution treatment showed serious blackening of floral stems and resulted On negative effect in flower quality. Effect of gamma irradiation and all preservative solutions on the cut mum longevity were showed almost same tendency with rose cut flower longevity experiments. The 2% sugar dipping solution in mum cut flower showed the most superior preservative effect compared with the my other preservative solutions tested. Also non-irradiated treatment extended to flower up to complete wilt.

• Progress in Medical Physics
• /
• v.29 no.4
• /
• pp.101-105
• /
• 2018

In this paper, a neutron moderation system for boron neutron capture therapy (BNCT) based on a $^{252}Cf$ neutron source is proposed. Different materials have been studied in order to produce a high percentage of epithermal neutrons. A moderator with a construction mixture of $AlF_3$ and Al, three reflectors of $Al_2O_3$, BeO, graphite, and seven filters (Bi, Cu, Fe, Pb, Ti, a two-layer filter of Ti+Bi, and a two-layer filter of Ti+Pb) is considered. The MCNPX simulation code has been used to calculate the neutron and gamma flux at the output window of the neutronic system. The results show that the epithermal neutron flux is relatively high for four filters: Ti+Pb, Ti+Bi, Bi, and Ti. However, a layer of Ti cannot reduce the contribution of ${\gamma}$-rays at the output window. Although the neutron spectra filtered by the Ti+Bi and Ti+Pb overlap, a large fraction of neutrons (74.95%) has epithermal energy when the Ti+Pb is used as a filter. However, the percentages of the fast and thermal neutrons are 25% and 0.5%, respectively. The Bi layer provides a relatively low epithermal neutron flux. Moreover, an assembly configuration of 30% $AlF_3+70%$ Al moderator/$Al_2O_3$ reflector/a two-layer filter of Ti+Pb reduces the fast neutron flux at the output port much more than other assembly combinations. In comparison with a recent model suggested by Ghassoun et al., the proposed neutron moderation system provides a higher epithermal flux with a relatively low contamination of gamma rays.

• Journal of the Korean Vacuum Society
• /
• v.9 no.4
• /
• pp.436-441
• /
• 2000

Plasma nitrocarburising is a thermochemical heat treatment, and can be used for plain carbon steels and low alloy steels to improve wear, corrosion and fatigue resistance. The process is performed on automotive parts, machinery parts and engineering tools. However, it is still facing problems in obtaining a mono $\varepsilon$ phased compound layer. Therefore, the aim of this research is to investigate the possibility of forming a mono $\varepsilon$ phased compound layer using a gas mixture of nitrogen and methane. It was found that high nitrogen contents were essential for the production of $\varepsilon$ phase compound layer and with increasing methane content in the gas mixture, $\varepsilon$ phase compound layer was favoured. In addition, when the methane content was further increased, cementite was observed in the compound layer. $\gamma$' phase was produced after 10 minutes treatment time and cementite was formed in the compound layer resulting in decreasing the thickness of the compound layer.

• Journal of the Korean Society for Heat Treatment
• /
• v.11 no.4
• /
• pp.305-314
• /
• 1998

This study has been performed to investigate into some effects of various amounts of $CO_2$ and CO gas added to the $50%NH_3-N_2$ based gas atmosphere on microstructure, hardness, chemical analysis and residual stress in the compound and diffusion layer of AISI H13 treated by gaseous nitrocarburising process. The compound layer formed in the surface is composed of mainly ${\varepsilon}-Fe_3$(N,C) and small amount of ${\gamma}^{\prime}-Fe_4N$ and cementite. The maximum hardness value obtainable from H13 steel is shown to be 1200 Hv and the effecvtive hardening depth increases with increasing CO content from 1% to 4%. In the case of CO content over 4%, however, it decreases with increasing CO content. The composition profiles of nitrogen and carbon are found to be within the ${\varepsilon}$-phase field located above the ${\varepsilon}+{\gamma}^{\prime}$ phase field in the Fe-N-C diagram. It is shown that the maximum value of compressive residual stress of H13 steel treated in atmospheres of $50%NH_3-(2,4)%CO_2-N_2-CO$ gas mixture is $48kg/mm^2$ and the depth to which residual stress is in Compressive state is $90{\mu}m$ for the atmosphere $50%NH_3-45%N_2-4%CO_2-1%CO$ gas mixture. It is consequently important to control the maximum value and size of compressive residual stress region in order to obtain desirable mechanical properties.