• Journal of Life Science
• /
• v.24 no.5
• /
• pp.476-484
• /
• 2014

Obesity, which is characterized by a state of mild chronic inflammation, is known to cause metabolic diseases. This study was carried out to investigate the effect of lyophilized dropwort vinegar powder (DVP) on adipocyte differentiation and inflammation in T3-L1 preadipocyte and RAW 264.7 macrophage cell lines. DVP inhibited the differentiation of 3T3-L1 preadipocytes induced by a mixture of IBMX, dexamethasone, and insulin (MDI). Western blot analysis of cell lysates showed that DVP decreased the levels of two major transcription factors involved in adipogenesis, peroxisome proliferator- activated receptor-${\gamma}$ (PPAR-${\gamma}$) and CCAAT-enhancer-binding protein ${\alpha}$ ($C/EBP{\alpha}$). DVP also significantly suppressed lipopolysaccharide (LPS)-induced production of nitric oxide (NO), and this was accompanied by a decrease in inducible NO synthase (iNOS) and cyclooxygenase-2 (COX-2) protein expression. These results demonstrate that DVP inhibits MDI-induced adipocyte differentiation of 3T3-L1 cells and LPS-induced inflammation in RAW 264.7 macrophage cells. The findings indicate that this natural product may be a good candidate as to prevent metabolic diseases.

• Korean Journal of Food Science and Technology
• /
• v.31 no.1
• /
• pp.7-12
• /
• 1999

The effects of antioxidants, ascorbyl palmitate (AP), ${\alpha}-tocopherol\;({\alpha}-Toc)$, BHA and ascorbyl $palmitate+{\alpha}-tocopherol\;(AP+{\alpha}-Toc)$ have been investigated on lipid peroxide formations in tallow immediately and during storage at $50^{\circ}C$ after gamma irradiation with the dose of $1{\sim}10kGy$. Immediately gamma irradiation greatly increased the initiative oxidation of tallow as was expected. But antioxidants were found to be greatly effective in minimizing the radiation-induced peroxidation of tallow and their antioxidative activities were $AP>BHA>AP+{\alpha}-Toc>{\alpha}-Toc$. Especially, AP showed greater antioxidative activity of initiate-oxidation than that of any other antioxidant. Oxidation of tallow during storage at $50^{\circ}C$ after irradiation induced the accelate of autoxidation. But the additions of antioxidants inhibited formation of peroxide. Their antioxidative activities were $BHA>AP+{\alpha}-Toc>{\alpha}-Toc>AP$. Especially $AP+{\alpha}-Toc$ mixture was not significantly different from BHA (p>0.05).

• Korean Journal of Medicinal Crop Science
• /
• v.11 no.5
• /
• pp.352-357
• /
• 2003

Volatile flavor compounds Angelica gigas Nakai and Angelica acutiloba Kitagawa were extracted by SDE (simultaneous steam distillation & extraction) using the mixture of n-pentane and diethylether (1:1, v/v) as an extract solvent and analyzed by GC-FID and GC-MS. The amount of essential oils of top part and root in Angelica gigas were obtained in 0.063% (v/w) and 0.389% (v/w) yields as a fresh weight base, respectively. The main compounds in top parts and the root were identified as nonane (7.51% and 24.49%, respectively), ${\alpha}-pinene$ (14.64% and 31.75%), limonene+${\beta}-phellandrene$ (14.01% and 9.66%), ${\gamma}-terpinene$ (7.85% and 1.20%), germacrene-d (5.85% and 0.22%), (E,E)-${\alpha}-farnesene$ (6.05% and 1.40%), ${\beta}-eudesmol$ (5.26% and 1.84%). Although these compounds were present in both parts. The results showed large differences in. the concentrations of them much varied. The amount of essential oils stem and leaf obtained (0.068% and 0.127% in A. gigas) and (0.153% and 0.243% in A. acutiloba) yields as a fresh weight base, respectively. More than 18 and 32 components in stem and leaf have been identified, which of main components in A. gigas were ${\alpha}-pinene$, myrcene, limonene, germacrene-d, eudesmol and butylphthalide, but germacrene-d and butylphthalide contents were also different in stem and leaf. And more than 21 and 32 components in A. acutiloba were ${\gamma}-terpinene$ and butylphthalide. Volatile compounds were very different in both species.

• Journal of Sensor Science and Technology
• /
• v.1 no.1
• /
• pp.59-66
• /
• 1992

To develop the highly sensitive TLD radiation sensors, $BaSO_{4}$ : Eu-PTFE TLDs are fabricated by polymerizing the PTFE(polytetrafluoroethylene) with $BaSO_{4}$ : Eu TL phosphors. The $BaSO_{4}$ : Eu TL phosphors having the highest sensitivity of $X/{\gamma}$-rays are obtained by sintering at $1000^{\circ}C$ in $N_{2}$ atmosphere a mixture of $BaSO_{4}$ powder with 1mol% Eu($Eu_{2}O_{3}$), 6mol% $NH_{4}Cl$ and 5mol% $(NH_{4})_{2}SO_{4}$ which were co-precipitated in dilute sulfuric acid and then dried. The activation energy, frequency factor and kinetic order of $BaSO_{4}$ : Eu TL phosphor are 1.17eV, $3.6{\times}10^{11}/sec$ and 1.25, respectively. And the spectral peak of $BaSO_{4}$ : Eu is about 425nm. The optimum TL Phosphor content and thickness of the $BaSO_{4}$ : Eu-PTFE TLD are 40wt% and $105.7mg/cm^{2}$. The optimum polymerization temperature and time for fabrication of $BaSO_{4}$ : Eu-PTFE TLDs are $380^{\circ}C$ and 2 hours in air, respectively. The linear dose range to ${\gamma}$ rays is 0.01-20Gy and fading rate is about 10%/60hours.

• Journal of the Korean Chemical Society
• /
• v.38 no.2
• /
• pp.92-100
• /
• 1994

Ultrafine cobalt-substituted iron oxide particles were prepared by the thermal decomposition and oxidation of the new organometallic precursor, $Co_xFe_{1-x}(N_2H_3COO)_2(N_2H_4)_2$ (x = 0, 0.01, 0.02, 0.03, 0.05, 0.10, 1.00). The organometallic precursors were synthesized by the reaction of Co(II) and Fe(II) ion in a mole ratio of x : 1-x with hydrazinocarboxylic acid, and characterized by quantitative analysis, elemental analysis and infrared spectroscopy. The mechanistic study on the thermal decomposition of the organometallic precursors was performed by TG-DTG and DSC. The cobalt-substituted iron oxide particles were obtained by the heat treatment of the precursors at $350^{\circ}C$ and $450^{\circ}C$ for six hours in air. The prepared iron oxide was found to have two phases such as ${\gamma}-Fe_2O_3$ and a mixture of ${\gamma}-Fe_2O_3\;and\;{\alpha}-Fe_2O_3$ at $350^{\circ}C$ and $450^{\circ}C$ respectively. The particle shape was equiaxial and the particle size was less than 0.05 ${\mu}m.$ The coercivity and squareness of the cobalt substituted iron oxide particles increased with increasing cobalt content. Both coercivity and squareness showed higher values at $450^{\circ}C.$

• Asian-Australasian Journal of Animal Sciences
• /
• v.19 no.9
• /
• pp.1354-1360
• /
• 2006

Maize-soybean meal diets with 0, 100, 200 and 300 g/kg double zero rapeseed meal ('00' RSM) with and without an enzyme mixture (xylanase, pectinase, cellulase) at a level of 1.6 g/kg were evaluated with 624 day-old broiler chicks for 5 weeks. The birds were randomly allocated to eight dietary treatments with three replicates of 26 birds each. Average daily gain (ADG) and feed intake (FI) were recorded weekly and ileal viscosity, organ weights, serum enzyme activity, hormonal profile and hematological parameters were measured at the end of week 5. Average daily gain during the weekly periods was significantly influenced by the dietary level of '00'RSM (p<0.01). Inclusion of '00' RSM improved the ADG up to day 28 with the increased level; beyond that time no improvement was recorded when compared to control groups. However, ADG from 1-35 days was significantly different between 300 g/kg inclusion level of '00' RSM and the control diet. Inconsistent decline in feed intake and feed conversion ratio was observed up to day 21 and the trend was reversed thereafter. The proportion of '00' RSM in the diet had a significant ($p{\leq}0.05$) influence on thyroid weight but had no effect on the relative weights of liver and heart, serum enzyme activities (${\gamma}$-glutamyl transferase, alanine amino transferase and aspartate amino transferase), thyroid hormones ($T_3$ and $T_4$), hemoglobin level and hematocrit. Significant improvement in ADG was recorded during the 2nd week of age with the addition of enzyme, whereas for all other periods, including the whole period of the trial, higher but non-significant ADG was observed. FI and FCR were not affected by the addition of enzyme but there was a numerical reduction in FCR during the whole period. The addition of enzyme reduced the ileal viscosity at all levels of '00' RSM inclusion. The results suggest that '00' RSM can be included up to 300 g/kg in broiler diets without any adverse effects on health and performance. The addition of commercial enzyme mixture containing xylanase, pectinase, cellulase to broiler diets containing '00'RSM has some effect on growth rate and feed conversion efficiency.

• Microbiology and Biotechnology Letters
• /
• v.7 no.1
• /
• pp.1-8
• /
• 1979

A new method for immobilization of glucose oxidate by the aerobic gamma radiation of synthetic monomers was developed. The radiocopolymerization was conducted aerobically at -70 to -8$0^{\circ}C$ with the mixture of several polyfunctional esters, acrylates and native enzyme. The retained activity of immobilized glucose oxidase was about 50 to 55％ when a NK 23G ester, acrylamide-bis and water mixture (1:1:2) in cold toluene treated with 450 krad of gam-ma radiation. The radiation dose did not influence significantly to the enzyme activity. The solvents used to prepare the beads of glucose oxidase and monomers were toluene, n-hexane, petoleum ether and chloroform. 0.05M tris-gycerol (pH 7.0) was a more suitable bugger solution for immobilizing the enzyme than was 0.02M phosphate. Immobilization of glucose oxidase shifted the optimum pH for its reaction from 6.0 to 6.5. The pH profile for the immobilized enzyme showed a broad range of optimum activity while the native enzyme gave a sharp pick for its optimum pH value. The immobilized enzyme reaction temperature was at the range of 30~4$0^{\circ}C$.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.44 no.3
• /
• pp.277-284
• /
• 2018

Collagen peptide plays a protective role in skin by increasing the activity of antioxidant, acts like an activator of skin regeneration by positive feedback and is used as a potent candidate for cosmetics or functional food. GABA acts at inhibitory synapses in the brain by binding to specific transmembrane receptors of both pre- and postsynaptic neuronal processes in vertebrates, is also involved in the synthesis of melatonin and might exert regulatory effects on sleep and reproductive functions. In this study, we investigated the beneficial effect of a mixture of collagen peptide and GABA (J85091900) on skin and sleep condition in woman experiencing sleep disorder. We found that oral supplement with J85091900 significantly decreased the value of Pittsburgh Sleep Quality Index (PSQI), increased sleeping time by 7%, and also improved skin roughness (Ra, Rz, Rt), periorbital wrinkle (Ra, Rt), and skin capacitance in human. These findings indicate that dual strategy with which skin improvement is accomplished using collagen peptide and sleeping well is acquired using GABA could be the novel solution for sleeping beauty by edible cosmetics to improve skin status.

• Journal of the Korean Society for Heat Treatment
• /
• v.11 no.2
• /
• pp.99-110
• /
• 1998

The effects of pre-heat treatment(Q/T) on microstructure and hardness of SCM435 structural steel nitrided by micro-pulse plasma was investigated. The quenching and tempering temperatures for obtaining matrix hardness of SCM435 steel on range of HRC30 to HRC40 desired for machine parts were about $860^{\circ}C$ and $500^{\circ}C$ respectively. The case depth of SCM435 nitrided at $480^{\circ}C$ for 5 hours was independent of pre-heat treatment condition and was approximately $150{\mu}m$. However, hardness and compactness of nitrified layer on Q/T treated specimen were more heigher than annealed specimen. The case depth increased linearly with the increase of nitriding temperature, however, the hardness of nitrified layer decreased with the temperature. Phase mixture of ${\gamma}^{\prime}$-phase($Fe_4N$) and ${\varepsilon}$-phase($Fe_3N$) were detected by XRD analysis in the nitrified layer formed at optimum nitriding condition, and only single ${\gamma}^{\prime}$-phase was detected in the nitrified layer formed at higher nitriding temperature such as $540^{\circ}C$. The optimum nitriding temperature was approximately $480^{\circ}C$ which is lower than tempering temperature for preventing softening behavior of SCM435 matrix during nitriding process and the surface hardness of nitrified layer obtained by optimum preheat treatment condition was about Hv930.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.268-268
• /
• 2012

Atmospheric pressure microwave induced plasmas are used to excite and ionize chemical species for elemental analysis, for plasma reforming, and for plasma surface treatment. Microwave plasma differs significantly from other plasmas and has several interesting properties. For example, the electron density is higher in microwave plasma than in radio-frequency (RF) or direct current (DC) plasma. Several types of radical species with high density are generated under high electron density, so the reactivity of microwave plasma is expected to be very high [1]. Therefore, useful applications of atmospheric pressure microwave plasmas are expected. The surface characteristics of SUS304 stainless steel are investigated before and after surface modification by microwave plasma under atmospheric pressure conditions. The plasma device was operated by power sources with microwave frequency. We used a device based on a coaxial transmission line resonator (CTLR). The atmospheric pressure plasma jet (APPJ) in the case of microwave frequency (880 MHz) used Ar as plasma gas [2]. Typical microwave Pw was 3-10 W. To determine the optimal processing conditions, the surface treatment experiments were performed using various values of Pw (3-10 W), treatment time (5-120 s), and ratios of mixture gas (hydrogen peroxide). Torch-to-sample distance was fixed at the plasma edge point. Plasma treatment of a stainless steel plate significantly affected the wettability, contact angle (CA), and free energy (mJ/$m^2$) of the SUS304 surface. CA and ${\gamma}$ were analyzed. The optimal surface modification parameters to modify were a power of 10 W, a treatment time of 45 s, and a hydrogen peroxide content of 0.6 wt% [3]. Under these processing conditions, a CA of just $9.8^{\circ}$ was obtained. As CA decreased, wettability increased; i.e. the surface changed from hydrophobic to hydrophilic. From these results, 10 W power and 45 s treatment time are the best values to minimize CA and maximize ${\gamma}$.