• 한국연소학회:학술대회논문집
• /
• 2002.06a
• /
• pp.204-211
• /
• 2002

Combustion experiments are carried out to obtain the fundamental data for application of a internally circulating fluidized bed combustor to the combustion of paper sludge wastes. Experimental parameters are identified as secondary air ratio, sludge weight and water contents. The secondary air ratio was varied from 0 to 20% and water content was 14%, 25%, 35%, 45%, 62% and sludge weight was 30g, 60g, 90g. As a result, carbon conversion ratio was higher than injection of primary air. Emission of CO and NOx reduced with an increase of secondary air injection.

• Journal of the Korean Ceramic Society
• /
• v.23 no.1
• /
• pp.1-6
• /
• 1986

The shrinkage rate of solid state sintering has been theoretically derived by combining the rate equation of material transport and the net free energy change resulting from the decrease of solid-vapor interface and the increase of grain boundary during sintering. For a sinteing model an idealized situation of the spherical particles with BCC packing was taken as the initial condition and the shrinkage was assumed to occur by forming the flat circualr grain boundaries on each particle. The plotted shrinkage rates as a function of grain boundary to surface energy ratio $(gamma_g/gamma_s)$ have shown that the relative density increases linearly at the initial stage of sintering but the shrinkage rate is decreased upon further sintering due to a decrease in driving force for densificaton. It has been also shown that the densification is critically affected by the $gamma_g/gamma_s$ ratio. In order to get the complete densificatin the ratio should be less than $sqrt{3}$. Any additive or atmospheric condition causing the decrease of$_g/gamma_s$ ratio will enhance sintering.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1996.10a
• /
• pp.283-289
• /
• 1996

In this paper, the mix design of the super flowing concrete is described with respcet to basic concept, confined water ratio($\beta_p$), volume ratio of water-binder(w/b), volume ratio of fine aggregates($S_r$) and coarse aggregates($G_v$). The primary purposes of this study are to evaluate the effects of cementitious materials(fly ash, slag cement, portland cement), mixing factors ($\beta_p$, w/b, $S_r$, $G_v$)., and to propose the mix design method of the super flowing concrete. As results of this study, confined water ratio($\beta_p$) of cementitious materials is very high (0.99~1.1), and then the ranges of the optimum mixing factors to be satisfied with the super flowing concrete are $S_r$ 47$\ell$ 2%, $G_v$ 52$\ell$ 1%.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.47 no.6
• /
• pp.59-70
• /
• 2005

A series of resonant column test was performed to investigate the dynamic deformation characteristics of silty sand soils mixed with polypropylene fibrillated type fiber. Results show that optimum mixing ratios were $0.2\%$ for 19mm of cut fiber for shear modulus and $0.1\%$ for 60mm cut fiber fur damping ratio. As shear strain was increased, normalized values of shear modulus (G(Reinforced)/ G(Unreinforced)) of fiber reinforced soil were increased up to $10^{-3}\%\~10^{-1}\%$ ranges. However, normalized damping ratio (D(Reinforced/D(Unreinforced)) was diminished with an increase in strain beyond $10^{-3}\%\~10^{-1}\%$ for the damping capacity of soils mixed with fiber. Normalized shear modulus $(G/G_{max})$ obtained from the test was plotted in the chart suggested by Seed and Idriss. The shear modulus of silty sand was located between sand and gravel curves.

• 대한예방의학회:학술대회논문집
• /
• 1994.02b
• /
• pp.158-163
• /
• 1994

Slightly elevated urinary albumin excretion rate (microalhuminuria) is a marker of early diabectic nephropathy, but it is unclear if the established definition of microalbuminuria ($20-200{\mu}g/min$) is correct for children and adolescents. We investigated th.: albumin excretion rate, albumin/creatinine ratio and urinary albumin concentration in 150 healthy schoolchildren and adolescents to (a) obtain a reterence value for albumin excretion rate, (b) relate albumin excretion to pubertal stages and (c) evaluate albumin/creatinine ratio and morning albumin concentration as screening methods for elevated albumin excretion rate. Albumin concentration was measured by immunoturbidimetry in timed overnight urine samples. The albumin excretion showed a skewed distribution (geometric mean $3.2{\mu}g/min$, 95 percentile ($15.1{\mu}g/min$). In girls. a peak in the albumin excretion rate was found at the pubertal stage 4 (Tanner) and in boys at stage 5. Albumin/creatinine ratio of 2.5 mg/mmol as a screening level for elevated albumin excretion ($15{\mu}g/min$) showed a high positive (0.88) and negative (0.99) predictive value.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.16 no.4
• /
• pp.33-40
• /
• 2010

Gross-to-net ratio is the important factor determining size of the building. However it was determined as the empirical method without the exact basis in the existing planning. This paper proposes more accurate methods for determining the gross-to-net ratio of architectural planning in general hospital. This paper analyzes the difference of gross-to-net ratio according to the various conditions and presents the elements of influencing on gross-to-net ratio. These elements is evaluated by applying in the typical hospital case. In conclusion, gross-to-net ratio is influenced by the accuracy of the space program, form type of the space and correspondence potential about the internal variation. In addition, This study has proved that empirical approach is a standard of minimum area.

• Journal of Biomedical Engineering Research
• /
• v.23 no.6
• /
• pp.451-458
• /
• 2002

Osteoporosis is a systemic skeletal disease caused by low bone mass and the decrease of bone density in the microstructure of trabecular bone. Drug therapy(PTH Parathyroid hormone) may increase the trabecular thickness and thus bone strength. Vertebroplasty is a minimally invasive surgery foy the treatment of osteoporotic vertebral compression fracture. This Procedure includes Puncturing vertebrae and filling with Polymethylmethacrylate(PMMA). Although altering recommended monomer-to-Powder ratio affects material properties of bone cement, clinicians commonly alter the mixture ratio to decrease viscosity and increase the working time. The Purposes of this study were to analyze the effect of 4he monomer-to-powder ratio on the mechanical characteristics of trabecular. In this paper, the finite element model of human vertebral trabecualr bone was developed by modified Voronoi diagram, to analyze the relative effect of hormone therapy and vertebroplasty at the treatment of osteoporotic vertebrae. Trabeuclar bone models for vertebroplasty with varied monomer-to-Powder ratio(0.40∼1.07 ㎖/g) were analyzed. Effective modulus and strength of bone cement-treated models were approximately 60% of those of intact models and these are almost twice the values of hormone-treated models. The bone cement models with the ratio of 0.53㎖/g have the maximum modulus and strength. For the ratio of 1.07㎖/g, the modulus and strength were minimum(42% and 49% respectively) but these were greater than those for drug therapy. This study shows that bone cement treatment is more effective than drug therapy. It is found that in vertebroplasty, using a monomer-to-powder ratio different from that recommended by manufacturer nay significantly not only reduce the cement's material Properties but also deteriorate the mechanical characteristics of osteoporotic vertebrae.

• Journal of the Korean Chemical Society
• /
• v.30 no.4
• /
• pp.394-402
• /
• 1986

Detonation reaction in L.P.G./$O_2$ mixture gas has been investigated over the L.P.G. concentration range of 3∼45 volume%. The variation of detonation velocity with mixture ratio is very interesting as it shows and inflection point near at the stoichiometric ratio. This might be ascribed to the fact that the detonation reactions at fuel-rich condition and fuel-lean condition proceed via different mechanisms. The maximum detonation velocity of 2.65km/sec occurs not at stoichiometric ratio(${\phi}$=1) but at fuel-rich condition (${\phi}$=1.57). Assuming that a stable detonation wave must propagates with the constant velocity, The upper and lower limit of detonation were determined and found to be 40.0 and 3.40 L.P.G. volume% respectively. The shock-heating technique was also utilized for the measurement of self-ignition temperature onsetting a stable detonation wave at varous mixture ratios. The self-ignition temperature at stoichiometric ratio is $742{\pm}3{\circ}K$ and the self-ignition temperature increases as the mixture ratio deviates from the stoichiometric condition.

• Applied Chemistry for Engineering
• /
• v.25 no.3
• /
• pp.318-323
• /
• 2014

In order to analyze the effect of maleic anhydride (MAH) content and styrene monomer (SM)/MAH mole ratio on reactive extrusion of maleic anhydride grafted random polypropylenes (MAH-g-rPP), MAH-g-rPPs were prepared by using a twin screw extruder. MAH contents were 0.5, 1.0, 3.0, and 5.0 phr and SM/initiator mole ratio was 0.0, 1.0, and 2.0. Dicumyl peroxide (DCP) was used as an initiator. The graft degree of MAH was confirmed by the existence of carbonyl group (C = O) stretching peak at $1700cm^{-1}$ from FT-IR spectrum. The degree of graft reaction increased up to 3.0 phr MAH and showed the optimum value at 1.0 SM/MAH mole ratio from the area ratio of C = O and C-H stretching peak. Thermal and crystallization properties of MAH-g-rPP and PP/MAH-g-rPP/pulp composites were investigated by DSC, TGA, XRD, and POM. There was a decrease in non-isothermal crystallization temperature of PP/MAH-g-PP/pulp composites. Based on tensile properties and SEM pictures for the fractured surface of PP/MAH-g-PP/pulp composites, MAH content of 1.0 wt% and SM/MAH mole ratio of 1.0 were the optimum formulation as the compatibilizer. The rheological properties of the composites were measured by dynamic Rheometer to compare the processability of the composites with and without compatibilizer. The power law index showed slightly low value at the composites with compatibilizer.

• Korean journal of food and cookery science
• /
• v.12 no.2
• /
• pp.146-152
• /
• 1996

Determining the optimal mixing ratio of pumpkin, water, glutinous rice powder, red bean, kidney bean in preparing Hobakjook has been attempted and on the basis of it, Hobakjook with glutinous rice powder was set to be A group, and the one that glutinous rice powder was replaced by brown glutinous rice powder for the purpose of enhancing preference and nutrition was set to be B group. A group and B group with additional 0％, 5％, 10％, 15% perilla powder of pumpkin weight was labeled as Al-A4 and Bl-B4 respectively, and then analyzed nutritionally. Optimal material mixing ratio and preference was investigated by use of sensory evluation and instrumental test. As a result, the optimal material mixing ratio was determined as pumpkin 400 g, water 60 cc, glutinous rice powder 40 g, red bean 30 g, kidney bean 30 g, salt 4 g, sugar 10 g. In sensory evaluation significant difference (P < 0.05) was shown among the samples in color., flavor.1, falvor. II and overall quality. And A3 in viscosity, A2 in color, A4 in sweetness, B2 in flavor 1, Al and B2 in flavor 11, and B2 in overall quality was preferred most. Instrumental measurement shows that B4 in viscosity and A4 in sweentness was highestly recorded and showed significant difference (p<0.05). As the addition of perilla powder increased, the viscosity and sweetness was increased. In color measurement A4 in L value, A3 in a value, and Bl in b value was highestly recorded. And as perilla powder was added, L value and a value was increased while b value was decreased. Color in sensory evaluation was significantly correlated to b value in instrumental measurement. In summary, Hobakjook with brown glutinous rice was superior to the one with glutinous rice in preference and proximate composition, and as the addition of perilla powder was increased, proximate composition was increased but preference was rather decreased, and Hobakiook with 5％ addition of perilla powder to brown glutinous rice powder was preferred most.