• Microbiology and Biotechnology Letters
• /
• v.24 no.2
• /
• pp.149-154
• /
• 1996

Effect of glucose addition to xylose medium on xylitol production was investigated by using Candida parapsilosis ATCC 21019 mutant. With increasing the ratio of glucose to xylose in total amount of 50 g/l as glucose and/or xylose, xylitol production was decreased but ethanol and glycerol production were increased. Ethanol and glycerol concentration were maxmum in 10 g/l of xylose and 40 g/l of glucose medium as 21.5 g/l and 3.6 g/l, respecti- vely. No xylitol was formed in glucose medium without xylose because xylitol could be not produced from glucose. With increasing the ratio of glucose to xylose, the activity of xylose reductase which converted xylose to xylitol were decreased. The activities of xylitol dehydrogeiiase which converted xylitol to xylulose and then cell materials were found to be constant regardless of the ratio of glucose to xylose. This results indicated that glucose addition to xylose medium on cell growth was not affected. In order to prevent the inhibitory effect of glucose on xylitol production, glucose in a fermentor was fed with low concentration and then ethanol and glycerol was critically decreased and the xylitol yield from xylose of the culture with glucose feeding was recovered the almost same as that with only 50 g/l of xylose. However, the xylitol yield from total sugars (xylose and glucose) was decreased and glucose was not contributed to xylitol production. Therefore, the fermentation at high concentration of xylose without glucose was carried out. A final xylitol concentration of 242 g/l which corresponding 80.7% of xylitol yield was obtained from 300 g/l of xylose for 273 hours.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.19 no.1
• /
• pp.61-71
• /
• 2016

The purpose of the research is to identify the optimal seeding quantity of Lespedeza cyrtobotrya and Indigofera pseudo-tinctoria as leguminous woody plants for the cut-slope revegetation. To investigate the coverage ratio and appearance frequency, we divided Lespedeza cyrtobotrya and Indigofera pseudo-tinctoria into five treatment groups with various quantities of $0.0g/m^2$, $1.0g/m^2$, $2.4g/m^2$, $3.8g/m^2$, and $5.2g/m^2$. For each treatment group, we mixed the identical quantities of herbaceous flowers (Lotus corniculatus var. japonicus, Dianthus sinensis, Aster yomena and Pennisetum alopecuroides) seeds and cool-season turfgrasses (Festuca arundinacea and Poa pratensis) seeds. In this result, as the seeding quantity of Lespedeza cyrtobotrya and Indigofera pseudo-tinctoria increased in the spray, the coverage ratio for leguminous woody plants appeared to increase whereas the coverage ratio decreased in herbaceous flowers and cool-season turfgrasses. However, when the seeding quantity of Lespedeza cyrtobotrya and Indigofera pseudo-tinctoria exceeded $3.8g/m^2$ in the spray, the coverage ratio of leguminous woody plants rather decreased compared to four treatment groups less than $3.8g/m^2$ seeding ratio. Based on the longitudinal data of coverage ratio in five treatment groups, we observed the gradual process of a short-term succession in which the dominant species shifted in the following order: First, cool-season turfgrasses; Second, herbaceous flowers; Third, leguminous woody plants. Comparing the appearance frequency of Lespedeza cyrtobotrya and Indigofera pseudo-tinctoria, Lespedeza cyrtobotrya appeared more frequent in 2014 whereas Indigofera pseudo-tinctoria appeared to be relatively more frequent in 2015. As a result, Indigofera pseudo-tinctoria was discovered to be a dominant species among woody plants. In this study, we observed that the optimal seeding quantity of Lespedeza cyrtobotrya and Indigofera pseudo-tinctoria was $2.4g/m^2{\sim}3.8g/m^2$. Moreover, the coverage ratio of 29.1%~35.4% and appearance frequency of 4.6plants~5.8plants were found in the condition of optimal seeding quantity.

• Journal of the Korean Solar Energy Society
• /
• v.32 no.4
• /
• pp.51-58
• /
• 2012

This study aims to analyze characteristics of Cell surface temperature and generated power performance for improving PV(Photovoltaic) system condition according to the cell opening ratio of transparent crystal PV system at Spandrel of curtain-wall. For this purpose, alternatives were classified for eight different cases that opening ratio of transparent crystal PV system varied from 0% to 70%, which was used by simulation tool, EnergyPlus. As results, it turned out that increasing opening ratio of transparent crystal PV system led higher PV surface temperature, back-sheet type was thus the most advantageous for decreasing surface temperature, annual generating efficiency, and annual accumulated generating power. Consequently, blocking off air space from outside insolation can advantageously keep to be better condition for generated power performance.

• Journal of Microbiology and Biotechnology
• /
• v.24 no.11
• /
• pp.1542-1550
• /
• 2014

Co-digesting molasses wastewater and sewage sludge was evaluated for hydrogen production by response surface methodology (RSM). Batch experiments in accordance with various dilution ratios (40- to 5-fold) and waste mixing composition ratios (100:0, 80:20, 60:40, 40:60, 20:80, and 0:100, on a volume basis) were conducted. Volatile solid (VS) concentration strongly affected the hydrogen production rate and yield compared with the waste mixing ratio. The specific hydrogen production rate was predicted to be optimal when the VS concentration ranged from 10 to 12 g/l at all the mixing ratios of molasses wastewater and sewage sludge. A hydrogen yield of over 50 ml $H_2/gVS_{removed}$ was obtained from mixed waste of 10% sewage sludge and 10 g/l VS (about 10-fold dilution ratio). The optimal chemical oxygen demand/total nitrogen ratio for co-digesting molasses wastewater and sewage sludge was between 250 and 300 with a hydrogen yield above 20 ml $H_2/gVS_{removed}$.

• Journal of the Korea Institute of Building Construction
• /
• v.4 no.2
• /
• pp.97-103
• /
• 2004

In this study, the experiment was carried out to investigate and analyze the influence of coarse aggregate's mix ratio and maximum size on the properties of concrete. The main experimental variables were water/cement ratio 45% and 65%, coarse aggregate/fine aggregate ratio 90%, 130% and 170%, maximum size of coarse aggregate 15mm, 25mm and 40mm. According to the test results, the principal conclusions are summarized as follows. 1) The slump and flow of fresh concrete were found to be higher in the order of G/S ratio 170%, 130%, 90%, also in the order of maximum size 40mm, 25mm, 15mm. 2) The compressive strength of hardened concrete were found to be higher in the order of G/S ratio 170%, 130%, 90%, also in the order of maximum size 15mm, 25mm, 40mm.

• Biomedical Science Letters
• /
• v.2 no.1
• /
• pp.127-132
• /
• 1996

The karyotype and the concentration of serum protein were investigated in Korean unclassified mental retardees. The results were as follows. Fragile X chromosomes were identified in three patients, and the frequencies of fragile X chromosome were 4~15%. The concentration of serum protein was 5.73$\pm$0.89(g/dl), and the A/G ratio was 0.86$\pm$0.14 in fragile X syndrome patients. The concentration of serum protein was 6.83 $\pm$0.72(g/dl), and the A/G ratio was 0.87$\pm$0.17 unclassified mental retardees. The results revealed that the level of globulin concentration and A/G ratio in fragile X syndrome patients and unclassified mental retardees were lower than in normal group and Down's patients.

• Korean Journal of Metals and Materials
• /
• v.50 no.4
• /
• pp.271-279
• /
• 2012

9-12% Cr steels have been used in thermal power plants which repeat start and stop operations. Major factors of fatigue life are temperature, frequency, stress ratio, holding time, microstructure, and environment. Normally, fatigue life decreases at high temperature, low frequency, high stress ratio, and long holding time conditions. A Mod.9Cr-1Mo steel, called G91, was developed at ORNL (Oak Ridge National Laboratory, USA) and was adopted as a high-temperature structural material in the ASME Code in 2004. However, its low-cycle fatigue and fatigue crack growth characteristics have been rarely studied. In this work, we have investigated the low-cycle fatigue crack growth behaviors of G91 steel under various test conditions in terms of temperature and stress ratio. As temperature and stress ratio increase, the crack growth rate becomes faster and striation distance also increases. On the other hand, the number of branch cracks decreases.

• Journal of Korean Society on Water Environment
• /
• v.21 no.6
• /
• pp.687-694
• /
• 2005

Lab-scale experiments have been carried out to investigate the effect of F/R ratio of ASBR (Anaerobic Sequencing Batch Reactor) process on the removal of the organic matters in ammonia stripped swine wastewater. Three ASBR inoculated with sludge mixed with granular sludge of UASB (Upflow Anaerobic Sludge Blanket) and anaerobic digested sludge of municipal wastewater treatment plant were operated. Ammonia stripped swine wastewater was used as influent. Prior to conducting the experiments with varied conditions, the effect of increasing organic loading rate from 2.34 to $5.79gTCOD_{Cr}/L$-day at a fixed F/R ratio of 0.1 on the organic removal efficiency has been studied during start-up period. As the result of the experiment, under the condition of varied organic loadings, less than $4.14gTCOD_{Cr}/L$-day, the removed efficiency $TCOD_{Cr}$ of the ASBR process is 83% resulted from the mean value of effluent $TCOD_{Cr}$, 9,125 mg/L during the start-up period. Then ASBRs were operated with F/R ratio of 0.024, 0.303 and 0.91 respectively. Organic loading rate was increased from 4.56 to $15.43gTCOD_{Cr}/L$-day to investigate the effects of F/R ratio and organic loading rate on the organic removal efficiency. As the result of the experiment, less than $6.23gTCOD_{Cr}/L$/L-day, F/R ratio haven't an effect on the organic removal efficiency and the mean removal efficiency of TSS, $TCOD_{Cr}$ and $SCOD_{Cr}$ was about 80%, 86% and 78% at the all of F/R ratio. But as organic loading rate was increased from 8.54 to $12.04gTCOD_{Cr}/L$-day at the F/R ratio of 0.024, the removal efficiency of $SCOD_{Cr}$ decreased from 71% to 63%. The range of decreased removal efficiency of $SCOD_{Cr}$ at the F/R ratio of 0.024 was much more higher than at the F/R ratio of 0.303, 0.91. Thus, as organic loading rate was increased, ASBRs were operated with high F/R ratio to obtain high removal efficiency.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.03a
• /
• pp.324-337
• /
• 2010

For the development of load and resistance factor design, reliability analysis is required to calibrate resistance factors in the framework of reliability theory. The distribution of measured-to-predicted pile resistance ratio was constructed based on only the results of load tests conducted to failure for the assessment of uncertainty regarding pile resistance and used in the conventional reliability analysis. In other words, successful pile load test (piles resisted twice their design loads without failure) results were discarded, and therefore, were not reflected in the reliability analysis. In this paper, a new systematic method based on Bayesian theory is used to update reliability index of driven steel pile piles by adding more pile load test results, even not conducted to failure, into the prior distribution of pile resistance ratio. Fifty seven static pile load tests performed to failure in Korea were compiled for the construction of prior distribution of pile resistance ratio. Reliability analyses were performed using the updated distribution of pile resistance ratio and the total load distribution using First-order Reliability Method (FORM). The challenge of this study is that the distribution updates of pile resistance ratio are possible using the load test results even not conducted to failure, and that Bayesian update are most effective when limited data are available for reliability analysis or resistance factors calibration.

• Development and Reproduction
• /
• v.18 no.2
• /
• pp.73-78
• /
• 2014

This study attempts to propose the possibility of the sex reversal in Sinonovacula constricta and Gomphina veneriformis by confirming the changes in the sex ratio with the shell length in the same population level. For analysis of sex ratio, 100 individuals of S. constricta (SL 26.5-95.0 mm) and 2385 individuals of G. veneriformis (SL 15.1-60.1 mm) were used. Sex was analyzed histologically. Both species displayed the tendency of increase in the female proportion with increase in shell length. In this study, changes in the sex ratio in accordance with the growth of S. constricta and G. veneriformis are determined to be indirect evidence that signifies their sex reversal.