• Journal of the Institute of Convergence Signal Processing
• /
• v.11 no.3
• /
• pp.183-188
• /
• 2010

In this paper we propose a detection method of the medial axis of the continuous stripes on the LoG scale-space. Our method detects the medial axis of continuous stripes iteratively by varying the scale of LoG operator. Small-scale LoG operator detects two +/- pole pairs centered on the edge positions of stripe by the zero-crossing detection. The more increase the scale of LoG scale-space, the more close two poles to the medial axis of stripe. The medial axis of continuous stripe is the position where two poles is overlapped. The proposed method detected robustly the medial axis of continuous stripes stronger than the thinning methods used to binary image.

• Kyungpook Mathematical Journal
• /
• v.51 no.3
• /
• pp.323-338
• /
• 2011

In this paper, we introduce ($$\tilde{g}$$, s)-continuous functions between topological spaces, study some of its basic properties and discuss its relationships with other topological functions.

• KSBB Journal
• /
• v.25 no.5
• /
• pp.471-477
• /
• 2010

In order to improve bio-ethanol productivity by various cultivation methods in this paper, the culture modes using food wastes, such as batch culture, high-cell-density fermentation, SSF (simultaneous saccharification and fermentation) by fill & draw, continuous culture by fill & draw were performed and their productivities were compared. SSFs by fill & draw were performed by continuous decompression using 1 L evaporator system, and by 10 L bioreactor without decompression. In addition, the continuous cultures by fill & draw mode using SFW (saccharafied food wastes) medium were performed by changes of 40% culture broth with intervals of 12 h (0.03 $h^{-1}$), 6 h (0.07 $h^{-1}$), 3 h (0.13 $h^{-1}$). Consequently, productivities of bio-ethanol were 2.52 g/L-h and 1.30 g/L-h in batch culture and high- cell-density fermentation, respectively. The productivities of SSF by fill & draw showed 2.24 g/L-h and 2.03 g/L-h in continuous decompression with 1 L evaporator and 10 L bioreactor without decompression, respectively. Also, the productivities in continuous culture by fill & draw modes showed 2.02 g/L-h, 4.07 g/L-h and 6.25 g/L-h by medium change with intervals of 12 h, 6 h, and 3 h, respectively. In conclusion, the highest ethanol productivity was obtained in the continuous culture mode by fill & draw with dilution rate of 0.13 $h^{-1}$.

• Korean Journal of Mathematics
• /
• v.8 no.1
• /
• pp.91-96
• /
• 2000

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.6 no.1
• /
• pp.1-5
• /
• 2001

The potential use of spin filter device to retain Propionibacterium acidipropionici in the bioreactor under continuous mode of fermentation, and improve acid productivity, was examined. The yield of propionic acid based on lactose concentration was 51% in batch and 54% in continuous (dilution rate = 0.05 h(sup)-1) operation. The yield in continuous fermentation with cell retention using spin filter of 10 micron size (dilution rate = 0.05 h(sup)-1) was even higher at 70% (w/w). The volumetric productivity under batch and continuous mode of operation were 0.312g L(sup)-1 h(sup)-1 and 0.718g L(sup)-1 h(sup)-1 respectively. Continuous fermentation with cell retention demonstrated even higher volumetric productivities at 0.98g L(sup)-1 h(sup)-1 with out clogging problems. It could be used for utilization of cheese whey to produce propionic acid at higher yield and productivities.

• ALGAE
• /
• v.39 no.2
• /
• pp.109-127
• /
• 2024

High production and efficient harvesting of microalgae containing high omega-3 levels are critical concerns for industrial use. Aeration can elevate production of some microalgae by providing CO₂ and O₂. However, it may lower the production of others by generating shear stress, causing severe cell damage. The mixotrophic dinoflagellate Gymnodinium smaydae is a new, promising microalga for omega-3 fatty acid production owing to its high docosahexaenoic acid content, and determining optimal conditions and methods for high omega-3 fatty acid production and efficient harvest using G. smaydae is crucial for its commercial utilization. Therefore, to determine whether continuous aeration is required, we measured densities of G. smaydae and the dinoflagellate prey Heterocapsa rotundata in a 100-L semi-continuous cultivation system under no aeration and continuous aeration conditions daily for 9 days. Furthermore, to determine the optimal conditions for harvesting through centrifugation, different rotational speeds of the continuous centrifuge and different flow rates of the pump injecting G. smaydae + H. rotundata cells into the centrifuge were tested. Under continuous aeration, G. smaydae production gradually decreased; however, without aeration, the production remained stable. Harvesting efficiency and the dry weights of omega-3 fatty acids of G. smaydae + H. rotundata cells at a rotational speed of 16,000 rpm were significantly higher than those at 2,000-8,000 rpm. However, these parameters did not significantly differ at injection pump flow rates of 1.0-4.0 L min^-1. The results of the present study provide a basis for optimized production and harvest conditions for G. smaydae and other microalgae.

• KSBB Journal
• /
• v.9 no.2
• /
• pp.104-107
• /
• 1994

A cone-type tower fermentor packed with Sacchromyces uvarum was employed to examine the continuous ethanol fermentation process. The maximum yeast concentration in the cone-type tower fermentor was 37.5-39.5g/$\ell$, the maximum ethanol productivity at the dilution rate of $hr^{-1}$ was 16.3g/$\ell$ . hr and the average ethanol yield was 0.48g EtOH/g glucose, which was 94% of the maximum theoretical yield. It was concluded that a cone-type tower fermentor might offer better perspectives for continuous ethanol fermentation.

• Microbiology and Biotechnology Letters
• /
• v.19 no.5
• /
• pp.497-503
• /
• 1991

The catalytic activities of immobilized gIucoamylase in a packed bed column and a continuous stirred tank reactor have been compared. Rapid production of glucose from liquefied starch have been studied through, the continuous liquefaction and saccharification using settling chamber. The immobilized glucoamylase with chitin gave the saccharification yield of 20% with the dextrin concentration of 100 g/l in a residence of 20 min. in a packed bed column. The half-life of immobilized glucoamylase with chitin was 19 days. The glucoamyalse immobilized in chitin and encapsulated with Ca-alginate gave the saccharification yield of 6% with the dextrin concentration of 50 g/l in a residence of 20 min. in a packed bed column. The Ca-alginate encapsulated and chitin immobilized glucomylase had a half-life of 25 days, which is 6 day larger than that of the immobilized glucoamylase with chitin only. In continuous liquefaction and saccharification, the glucose yield was 17% for the liquefied starch with naked barley concentration of 50gA in a residence of 20 min.

• Journal of Microbiology and Biotechnology
• /
• v.2 no.4
• /
• pp.284-287
• /
• 1992

Repeated-batch and continuous cultures of Lactococcus sp. 1112-1 were carried out for bacteriocin production using a glucose-casein medium. Repeated-batch culture did not efficiently enhanced the bacteriocin production. Continuous production was possible at the dilution rate of 0.4 $h^{-1}$. Maximum specific production rate ($Q^p$), bacteriocin production and biomass at the dilution rate were 347, 136 IU/g/h, 2, 121 IU/ml and 2.45 g/L, respectively.

• Journal of applied mathematics & informatics
• /
• v.40 no.3_4
• /
• pp.669-674
• /
• 2022

In this paper, we shall consider some properties of the metric projection as a set valued mapping. For a set G in a metric space E, the mapping 𝜋_G; x → 𝜋_G(x) of E into 2^G is called set valued metric projection of E onto G. We investigated the properties related to the projection P_S(·)(·) and 𝜋_S(·)(·) as one-sided best simultaneous approximations.