• 제어로봇시스템학회:학술대회논문집
• /
• 1990.10a
• /
• pp.127-130
• /
• 1990

The fuzzy logic controller which can be applied to various industrial processes is quite often dependent on the heuristics of the experienced operator. The operator's knowledge is often uncertain. Therefore an incorrect control rule on the basis of the operator's information is a cause of bad performance of the system. This paper proposes a new self-learning fuzzy control method by the fuzzy system identification using the data pairs of input and output and arbitrary initial relation matrix. The position control of a DC servo motor model is simulated to verify the effectiveness of the proposed algorithm.

• Journal of the Korean Society for Precision Engineering
• /
• v.11 no.1
• /
• pp.80-88
• /
• 1994

In the automation of rigid parts mating process with the intelligent robots, Peg-In-Hole is the most available task since inserting is some analytic and needs suitable range of forces that can be controlled by induatrial manipulators. In this Peg-In-Hole process, it is very important to identify the contact state between tow parts, peg and hole, to build the strategies for robot motion that leads to avoid the jamming condition occurs during insertion process. In this paper, we adpopted 3 parameters for identification, lFzl, lFxy/Fzl, and lMxy/Fxyl, derived from axes value of Whitney's jamming diagram. Also, we defined the fuzzy membership functions for these parameters and developed the identification algorithm based on fuzzy inference method of max-product. As an experimental result, we obtained about 96% of identification ratio that could be raised up to industrial requirements by further research.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1856-1857
• /
• 2011

Induction motor is nonlinear multivariable system. It is not easy to control precisely. Usually Induction motor need linearized model in order to make it easy to control. In this paper, linearized model of nonlinear model in induction motor can change by using TS Fuzzy Identification.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.33B no.11
• /
• pp.127-139
• /
• 1996

In this paper we propose a new controller design method using hybrid fuzzy-neural netowrk and neural network identification in order ot control systems which are more and more getting nonlinearity. Proposed method performs, for a nonlinear plant with unknown functions, hybird identification using a fuzzy-neural network and a neural network, and then a stable nonlinear controller is designed with those identified informations. To identify a nonlinear function, which is directly related to input signals, we can use a neural network which is satisfied with the proposed stable condition. To identify a nonlinear function, which is not directly related to input signals, we can use a fuzzy-neural network which has excellent identification characteristics. In order to verify excellent control performances of the proposed method, we compare the porposed control method with a conventional neural network control method through simulations and experiments with one link manipulator.

• Journal of Electrical Engineering and Technology
• /
• v.8 no.5
• /
• pp.1049-1055
• /
• 2013

DC motors are widely used in industries like cement, paper manufacturing, etc., even today. Early fault identification in dc motors significantly improves its life time and reduces power consumption. Many conventional and soft computing techniques for fault identification in DC motors including a recent work using model based analysis with the help of fuzzy logic are available in literature. In this paper fuzzy logic and norm based wavelet analysis of startup transient current are proposed to identify and quantify the armature winding fault and bearing fault in DC motors, respectively. Results obtained by simulation using Matlab and Simulink are presented in this paper to validate the proposed work.

• Proceedings of the KIEE Conference
• /
• 1999.11c
• /
• pp.815-817
• /
• 1999

In this paper, we developed a fuzzy identification system to evaluate sensation of equilibrium objectively and quantitatively. By using caloric test. we estimated ECG(electro-cardiogram) and EOG(electro-oculogram), which were biomedical signals related to sensation of equilibrium, and used them as inputs of fuzzy identification system input. Fuzzy identification system analyzed the relationality between biomedical signals and sensation of equilibrium automatically, and evaluated it taking the co-relation between these signals into consideration.

• Proceedings of the KIEE Conference
• /
• 1999.11c
• /
• pp.524-526
• /
• 1999

In the construction of successful fuzzy models and/or controllers for nonlinear systems, the identification of a good fuzzy inference system is an important yet difficult problem, which is traditionally accomplished by a time-consuming trial-and-error process. In this paper, we propose a systematic identification procedure for complex multi-input single-output nonlinear systems with DNA coding method. A DNA coding method is optimization algorithm based on biological DNA as conventional genetic algorithms(GAs) are. The strings in the DNA coding method are variable-length strings, while standard GAs work with a fixed-length coding scheme. the DNA coding method is well suited to learning because it allows a flexible representation of a fuzzy inference system. We also propose a new coding method fur applying the DNA coding method to the identification of fuzzy models. This coding scheme can effectively represent the zero-order Takagi-Sugeno(TS) fuzzy model. To acquire optimal TS fuzzy model with higher accuracy and economical size, we use the DNA coding method to optimize the parameters and the number of fuzzy inference system. In order to demonstrate the superiority and efficiency of the proposed scheme, we finally show its application to a Duffing-forced oscillation system.

• Industrial Engineering and Management Systems
• /
• v.13 no.4
• /
• pp.357-368
• /
• 2014

Since its birth in 1993, fuzzy time series have seen different classes of models designed and applied, such as fuzzy logic relation and rule-based models. These models have both advantages and disadvantages. The major drawbacks with these two classes of models are the difficulties encountered in identification and analysis of the model. Therefore, there is a strong need to explore new alternatives and this is the objective of this paper. By transforming a fuzzy number to a real number via integrating the inverse of the membership function, new autoregressive models can be developed to fit the observation values of a fuzzy time series. With the new models, the issues of model identification and parameter estimation can be addressed; and trends, seasonalities and multivariate fuzzy time series could also be modeled with ease. In addition, asymptotic behaviors of fuzzy time series can be inspected by means of characteristic equations.

• 제어로봇시스템학회:학술대회논문집
• /
• 1994.10a
• /
• pp.243-246
• /
• 1994

In this paper, a self-learning fuzzy controller is designed with a fuzzy approximation of an inverse model. The aim of an identification is to find an input command which is control of a system output. It is intuitional and easy to use a classical adaptive inverse modeling method for the identification, but it is difficult and complex to implement it. This problem can be solved with a fuzzy approximation of an inverse modeling. The fuzzy logic effectively represents the complex phenomena of the real world. Also fuzzy system could be represented by the neural network that is useful for a learning structure. The rule of a fuzzy inverse model is modified by the gradient descent method. The goal is to be obtained that makes the design of fuzzy controller less complex, and then this self-learning fuzz controller can be used for nonlinear dynamic system. We have applied this scheme to a nonlinear Ball and Beam system.

• 제어로봇시스템학회:학술대회논문집
• /
• 1992.10a
• /
• pp.502-506
• /
• 1992

In this study, we proposed the fuzzy modeling method and designed a model-based logic controller for Activated and Sludge Process(A.S.P.) in sewage treatment. The identification of the structure of fuzzy implications is carreid out by use of fuzzy c-means clustering algorithm. And to identify the parameters of fuzzy implications, we used the complex and the least square method. To tune the premise parameters automatically the complex method is implemented. The model-based fuzzy controller is designed by rules generated from the identified A.S.P. fuzzy model. The feasibility of the proposed approach is evaluated through the identification of the fuzzy model to describe an input-output relation of the A.S.P.. The performance of identified model-based fuzzy controller is evaluated through the computer simulations.