• Journal of the Korea Safety Management & Science
• /
• v.14 no.4
• /
• pp.153-168
• /
• 2012

It has been recognized as an important issue to design optimally a firm's logistics network for minimizing logistics cost and maximizing customer service. It is, however, not easy to get an optimal solution by analyzing trade-off of cost factors, dynamic and interdependent characteristics in the logistics network decision making. Although there has been some developments in a system which helps decision making for logistics analysis, it is true that there is no system for enterprise-wise's on-site support and methodical logistics decision. Specially, E-biz process along with information technology has been made dramatic advance in a various industries, there has been much need for practical education closely resembles on-site work. The software developed by this study materializes efficient algorithm suggested by recent studies in key topics of logistics such as location and allocation problem, traveling salesman problem, and vehicle routing problem and transportation and distribution problem. It also supports executing a variety of experimental design and analysis in a way of the most user friendly based on Java. In the near future, we expect that it can be extended to integrated supply chain solution by adding decision making in production in addition to a decision in logistics.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.24 no.3
• /
• pp.32-40
• /
• 2021

Underground information is difficult to visually check, which can lead to a huge accident in the event of a safety accident. Recently, the Ministry of Land, Infrastructure and Transport intends to reduce safety accidents caused by the aging or damage of underground facilities through the Special Act on Underground Safety Management. GPR is increasingly being used as a technology to acquire information in underground spaces that are difficult to see with the naked eye. However, GPR's location information is corrected by checking images of CCTV and GPS information acquired during exploration. This method has an average error of about 2 meters. In this works, We used LiDAR to calibrate the GPR information and found that the error was reduced from at least 7cm to up to 40cm. If accurate GPR information collected in the future is analyzed quickly using AI, etc., it will be able to collect and utilize underground information faster than it is now to secure safety.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.20 no.5
• /
• pp.75-82
• /
• 2021

The number of traffic accidents is about 230,000, and due to non-recurring congestion and high driving speed, the number of deaths per traffic accident on freeways is more than twice compared to other roads. Currently, traffic information is provided based on nodes and links using the centerline of the road, but it does not provide detailed speed information. Recently, installing sensors for vehicles to monitor obstacles and measure location is becoming common not only for autonomous vehicles but also for ordinary vehicles as well. The analysis using large-capacity location-based data from such sensors enables real time service according to processing speed. This study presents an mapping method for individual vehicle data analysis based on space. The processing speed of large-capacity data was increased by using method which applied a quaternary notation basis partition method that splits into two directions of longitude and latitude respectively. As the space partition was processed, the average speed was similar, but the speed standard deviation gradually decreased, and decrease range became smaller after 9th partition.

• Journal of Wetlands Research
• /
• v.20 no.4
• /
• pp.338-344
• /
• 2018

In this study, the surface air temperature (SAT) and the dew-point temperature (DPT) are applied as the covariance of the location parameter among three parameters of GEV distribution to reflect the non-stationarity of extreme rainfall due to climate change. Busan station is selected as the study site and the monthly maximum daily rainfall depth from May to October is used for analysis. Various models are constructed to select the most appropriate co-variate(SAT and DPT) function for location parameter of GEV distribution, and the model with the smallest AIC(Akaike Information Criterion) is selected as the optimal model. As a result, it is found that the non-stationary GEV distribution with co-variate of exp(DPT) is the best. The selected model is used to analyze the effect of climate change scenarios on extreme rainfall quantile. It is confirmed that the design rainfall depth is highly likely to increase as the future DPT increases.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.05a
• /
• pp.561-564
• /
• 2014

The Rare Isotope Science Project (RISP) at the Institute for Basic Science (IBS) constructs the rare isotope accelerator facility in South Korea. Since the accelerator control system uses various Ethernet-based devices and equipment, it is essential to build a unified Network-based control system. Because of the complexity of the accelerator facility, it will be a challenge to install a device in a proper location where the device could react quickly and exactly with respect to network security. In this report, we will present early study on Simple Network Management Protocol (SNMP) that tests various Ethernet-based devices out on an ideal network configuration in order to find an optimal location for each Ethernet-based device. Moreover, we will discuss future plan to integrate SNMP into Experimental Physics and Industrial Control System (EPICS) that is distributed soft real-time control systems for scientific instruments such as a particle accelerators, telescopes and other large scientific experiments.

• Steel and Composite Structures
• /
• v.31 no.3
• /
• pp.319-327
• /
• 2019

This paper describes an experimental study of steel beam-column connections with or without expanded beam flanges with different geometries. The objectives of this study are to elucidate the cyclic behavior of these connections, identify the location of the plastic hinge zone, and provide useful test data for future numerical simulations. Five connection specimens are designed and tested under cyclic load. The test setup consists of a beam and a column connected together by a connection with or without expanded beam flanges. A constant axial force is applied to the column and a time varying point load is applied to the free end of the beam, inducing shear and moment in the connection. Because the only effect to be studied in the present work is the expanded beam flange, the sizes of the beam and column as well as the magnitude of the axial force in the column are kept constant. However, the length, width and shape of the expanded beam flanges are varied. The responses of these connections in terms of their hysteretic behavior, failure modes, stiffness degradation and strain variations are experimentally obtained and discussed. The test results show that while the influence of the expanded beam flanges on hysteretic behavior, stiffness degradation and energy dissipation capacity of the connection is relatively minor, the size of the expanded beam flanges does affect the location of the plastic hinge zone and strain variations in these beam-column joints. Furthermore, in terms of ductility, moment and rotational capacities, all five connections behave well. No weld fracture or premature failure occurs before the formation of a plastic hinge in the beam.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.15 no.10
• /
• pp.3858-3874
• /
• 2021

As an essential part of the urban transportation system, precise perception of the traffic flow parameters at the traffic signal intersection ensures traffic safety and fully improves the intersection's capacity. Traditional detection methods of road traffic flow parameter can be divided into the micro and the macro. The microscopic detection methods include geomagnetic induction coil technology, aerial detection technology based on the unmanned aerial vehicles (UAV) and camera video detection technology based on the fixed scene. The macroscopic detection methods include floating car data analysis technology. All the above methods have their advantages and disadvantages. Recently, indoor location methods based on wireless signals have attracted wide attention due to their applicability and low cost. This paper extends the wireless signal indoor location method to the outdoor intersection scene for traffic flow parameter estimation. In this paper, the detection scene is constructed at the intersection based on the received signal strength indication (RSSI) ranging technology extracted from the wireless signal. We extracted the RSSI data from the wireless signals sent to the road side unit (RSU) by the vehicle nodes, calibrated the RSSI ranging model, and finally obtained the traffic flow parameters of the intersection entrance road. We measured the average speed of traffic flow through multiple simulation experiments, the trajectory of traffic flow, and the spatiotemporal map at a single intersection inlet. Finally, we obtained the queue length of the inlet lane at the intersection. The simulation results of the experiment show that the RSSI ranging positioning method based on wireless signals can accurately estimate the traffic flow parameters at the intersection, which also provides a foundation for accurately estimating the traffic flow state in the future era of the Internet of Vehicles.

• The Korean Journal of Applied Statistics
• /
• v.33 no.6
• /
• pp.739-751
• /
• 2020

Seoul public bike program facilitates access to bicycles and offers potential for greater mobility and health for users. Furthermore, it would have positive impacts on transport congestion, energy use, and the environment. Hence, it is important to find future rental locations by taking to account both bike-demand and regional imbalance. This paper first finds eligible candidates of rental locations with the required spatial conditions such as a sufficient sidewalk width and accessibility of bike pick-up vehicles. And then, estimates public bike daily usage for each selected location via random forest based on Seoul public bike historical usage, Seoul geographical features, regional characteristics, and populations. This study contributes to a better comprehension of the Seoul public bike program, and would be useful in determining new public bike rental locations.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.19 no.6
• /
• pp.61-73
• /
• 2020

Real-time location-sensing technology using location information collected from IoT devices is being applied for safety management purposes in many industries, such as ports. On the other hand, positional error is always present owing to the characteristics of GPS. Therefore, accident-risk detection algorithms must consider positional error. This paper proposes an methodology of calibration for falling object accident-risk-zone approach detection algorithm considering GPS errors. A probability density function was estimated, with positional error data collected from IoT devices as a probability variable. As a result of the verification, the algorithm showed a detection accuracy of 93% and 77%. Overall, the analysis results derived according to the GPS error level will be an important criterion for upgrading algorithms and real-time risk managements in the future.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.14 no.6
• /
• pp.57-68
• /
• 2004

Recently, Radio Frequency Identification (RFID) systems stands in the spotlight of industry as a common and useful tool in manufacturing, supply chain management (SCM) and stock management. In the near future, low-cost RFID Electronic Product Code; (EPC) or smart-labels may be a practical replacement for optical barcodes on consumer items. However, manufacturing cheap and small RFID tags, and developing secure RFID authentication Protocols are problems which need to be solved. In spite of advances in semiconductor technology, computation and storage ability of the tag are so limited that it is difficult and too expensive to apply existing crypto-systems to RFID tags. Thus it is necessary to create a new protocol which would require less storage space and lower computation costs and that is secure in the RFID system's environments. In this paper, we propose a RFID authentication protocol that is secure against location tracking and spoofing attacks. Our protocol can be used as a practical solution for privacy protection because it requires less computations in database than the previous RFID authentication protocol.