• Korean Journal of Soil Science and Fertilizer
• /
• v.47 no.2
• /
• pp.80-84
• /
• 2014

Phosphorus (P) is an essential nutrient for all living organisms. P is mostly obtained from mined rock phosphate. However, existing rock phosphate reserves could be exhausted in the next 50-100 years. As Korea is totally dependent on imported rock phosphate, we should seek for solution to overcome the P depletion by efficient use and recycling. For this, this study suggested a P flow model to identify the location and flow route of P in urban area based on traditional material flow analysis. The type of P entering the urban areas are fertilizer, food and feed. Each type of P is used in agriculture, human consumption and animal husbandry. After going through each process, P is moved to waste management facilities within food waste, excreta and sewage. Some portion of P in waste are buried, incinerated and discharged, which can be reservoir of P in the future.

• Electronics and Telecommunications Trends
• /
• v.35 no.6
• /
• pp.78-87
• /
• 2020

With the evolution of the Internet of Things (IoT), a computing paradigm shift from cloud to edge computing is rapidly taking place to effectively manage the rapidly increasing volume of data generated by various IoT devices. Edge computing is computing that occurs at or near the physical location of a user or data source. Placing computing services closer to these locations allows users to benefit from faster and more reliable services, and enterprises can take advantage of the flexibility of hybrid cloud computing. This paper describes the concept and main benefits of edge computing and presents the trends and future prospects for edge computing technology.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.1046-1050
• /
• 2003

In general, conventional user identification systems require users to carry a TAG or badge or to remember ID and password. Though biometric identification systems may relieve these problems, they are susceptible to environmental noise to some degree. We propose a natural user identification system, ubiFloor, exploiting user's walking pattern to identify the user. The system identifies a user, while tracking the user's location, with a set of simple ON/OFF switch sensors or equipments. Experimental results show that the proposed system can recognize the registered users at the rate of 92%. Future improvement in recognition rate may be achieved by combining other sensors such as camera, microphone, etc.

• Journal of Institute of Control, Robotics and Systems
• /
• v.17 no.7
• /
• pp.629-633
• /
• 2011

The Wolmi Eunha-Rail in Incheon is connecting Wolmido and Incheon Station with an elevated monorail road supported by piers. This railroad system is characterized by driverless automatic operation and moving-block based control. The main technology applied to this signal-controlled system is CBTC (Communications-Based Train Control) which based on wireless communications. The CBTC system is simple in that composition so that can minimize field facilities and lowers costs of construction and maintenance. This CBTC system is emerging as a major signal-controlled system in the future metro market.

• Electronics and Telecommunications Trends
• /
• v.32 no.5
• /
• pp.117-126
• /
• 2017

With the advances of high-performance, lightweight hardware components and control software, unmanned aerial vehicles (UAVs) have expanded in terms of use, not only for military applications but also for civilian applications. To complete their task at a remote location, UAVs are generally equipped with a camera, and various sensors and types of hardware devices can be attached according to the particular task. When UAVs capture video images and transmit them into the user's interface, augmented reality (AR) and virtual reality (VR) technologies as a user interface may have advantages in controlling the UAV. In this paper, we review AR and VR applications for UAVs and discuss their future directions.

• Radiation Oncology Journal
• /
• v.33 no.3
• /
• pp.161-171
• /
• 2015

Image-guided radiation therapy (IGRT) is a process of incorporating imaging techniques such as computed tomography (CT), magnetic resonance imaging (MRI), Positron emission tomography (PET), and ultrasound (US) during radiation therapy (RT) to improve treatment accuracy. It allows real-time or near real-time visualization of anatomical information to ensure that the target is in its position as planned. In addition, changes in tumor volume and location due to organ motion during treatment can be also compensated. IGRT has been gaining popularity and acceptance rapidly in RT over the past 10 years, and many published data have been reported on prostate, bladder, head and neck, and gastrointestinal cancers. However, the role of IGRT in lymphoma management is not well defined as there are only very limited published data currently available. The scope of this paper is to review the current use of IGRT in the management of lymphoma. The technical and clinical aspects of IGRT, lymphoma imaging studies, the current role of IGRT in lymphoma management and future directions will be discussed.

• IE interfaces
• /
• v.21 no.1
• /
• pp.65-74
• /
• 2008

In the future, the ubiquitous computing environment will provide users with context-aware services, intelligently interacting with omnipresent resources and surrounding environments at any location and time. Therefore, the ubiquitous computing environment requires context-aware applications in order to gather and analyze context information in various situations. However, existing context-aware applications have mainly focused on providing services and adapting themselves to users based on user related contexts. But this environment requires not only user related contexts but also Quality-of-Service (QoS) related contexts. In this paper we propose a frame-work for supporting user-oriented QoS in ubiquitous environments. The proposed approach adopts a semantic ontology and a neural network algorithm in order to reason about explicit and uncertain contexts. We also show the possibility of applying the framework to real environments such as collaborative engineering service, automobile maintenance service and ubiquitous home service.

• The KSFM Journal of Fluid Machinery
• /
• v.2 no.3 s.4
• /
• pp.17-23
• /
• 1999

In the present numerical analysis, investigation of the effect of blade loadings from design shape on the slip factor variation was studied. Both the Eckardt radial bladed impeller and the backswept impeller were analyzed. In addition, a new design of the blade profile was arbitrarily attempted to generate a center-loading pattern in the original backswept impeller. Three dimensional compressible Navier-Stokes flow analysis with the Baldwin-Lomax turbulence model was applied to get the numerical slip factor at each impeller exit plane using the mass-averaging technique. The numerical slip (actors are in good agreement with the experimental ones and the Wiesner's slip factors deviate further from the numerical and experimental ones in both backswept impellers. Deviation angles and meridional channel loadings are found in no relation with the trend of change of the slip factor. Blade-to-blade loadings in midspan location are, however, found to have a direct relationship, especially at the sections where maximum loadings we to be expected. That information can be utilized in establishing an improved expression for slip factors in the future.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.23 no.3
• /
• pp.291-298
• /
• 2014

This study uses two numerical approaches to analyze the filling behavior of micro patterns on micro-injection molding for V-grooves pattern which cannot be simulated with conventional CAE packages. The parametric studies have been performed to examine the fidelity of micro patterns with respect to temperature, pressure, inlet velocity and pattern location on the mold according to the boundary condition from the macro pressure and velocity data which can be obtained by conventional CAE packages. Through these numerical approaches, the filling behavior of polymer melt in micro patterns can be understood, the quality of replication can be predicted, and the V-groove pattern can be shaped uniformly during the process of injection molding.

• The Korean Journal of Nuclear Medicine
• /
• v.34 no.1
• /
• pp.1-9
• /
• 2000

The rapid progress of molecular genetic methods over the past two decades has necessitated the development of methods to detect and quantify genetic activity within living bodies. Reporter genes provide a rapid and convenient tool to monitor gene expression by yielding a readily measurable phenotype upon expression when introduced into a biological system. Conventional reporter systems, however, are limited in their usefulness for in vivo experiments or human gene therapy because of its invasive nature which requires cell damage before assays can be performed. This offers an unique opportunity for nuclear imaging techniques to develope a novel method for imaging both the location and amount of gene expression noninvasively. Current developments to achieve this goal rely on utilizing either reporter enzymes that accumulate radiolabeled substrates or reporter receptors that bind specific radioligands. This overview includes a brief introduction to the background for such research, a summary of published results, and an outlook for future directions.